1. FCC ID
  2. EOT
  3. EOTGPDB

FCC ID EOTGPDB

Gemini

by CALAMP WIRELESS NETWORKS INC.

Grantee Code: EOT   Product Code: GPDB
Latest application date: 2008-02-15

FCC ID Device Details

FCC IDEOTGPDB
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeEOT
Product CodeGPDB
Applicant BusinessCALAMP WIRELESS NETWORKS INC. 🇺🇸
Related Domains calamp.com
Equipment ClassGemini

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
794-806 MHzClass II permissive change or modification of presently authorized equipment2008-02-15
794-806 MHzClass II permissive change or modification of presently authorized equipment2007-06-22
806-824 MHzClass II permissive change or modification of presently authorized equipment2005-09-09
806-824 MHzClass II permissive change or modification of presently authorized equipment2004-11-04
806-824 MHzClass II permissive change or modification of presently authorized equipment2004-04-28
806-824 MHzClass II permissive change or modification of presently authorized equipment2003-01-14
806-824 MHzClass II permissive change or modification of presently authorized equipment2002-04-12
806-824 MHzClass II permissive change or modification of presently authorized equipment2002-04-12
806-824 MHzClass II permissive change or modification of presently authorized equipment2002-04-12
806-824 MHzClass II permissive change or modification of presently authorized equipment2001-04-25
806-824 MHzClass II permissive change or modification of presently authorized equipment2000-09-01
806-824 MHzOriginal Equipment2000-06-12
806-824 MHzClass II permissive change or modification of presently authorized equipment2000-06-12

Exhibits

DocumentTypeAvailableFile
updated user manualUsers Manual2004-11-04PDF 175.2 KB
preliminary version of updated installation manualUsers Manual2004-04-28PDF 556 KB
preliminary updated user manualUsers Manual2003-01-14PDF 203.4 KB
Appendix A preliminary version 1 42Users Manual2002-04-12PDF 420.5 KB
preliminary installation manualUsers Manual2002-04-12PDF 425.5 KB
preliminary versionUsers Manual2002-04-12PDF 234.8 KB
Annex B Installation manualUsers Manual2001-04-25PDF 237.8 KB
installation guideUsers Manual2000-09-01PDF 199.7 KB
Installation Guide 1 01Users Manual2000-06-12PDF 188.2 KB
preliminary version of user manualUsers Manual2000-06-12PDF 45.5 KB
revised pages 7 and 8 for preliminary ver1 11Users Manual2000-06-12PDF 30 KB
not required for this Class II Permissive ChangeInternal Photos2002-04-12PDF 19 KB
all internal and service position for boardsInternal Photos2000-06-12PDF 1.3 MB
updated front plate imageExternal Photos2004-04-28PDF 176 KB
not required for this Class II Permissive ChangeExternal Photos2002-04-12PDF 19 KB
front label side and rear viewExternal Photos2000-06-12PDF 1.3 MB
not required for this Class II Permissive ChangeID Label/Location Info2002-04-12PDF 19 KB
picture of the labelID Label/Location Info2000-06-12PDF 36.9 KB
operational description and block diagramsOperational Description2000-06-12PDF 117.5 KB
not required for this Class II Permissive ChangeSchematics2002-04-12PDF 19 KB
schematicsSchematics2000-06-12PDF 348.8 KB
not required for this Class II Permissive ChangeOperational Description2002-04-12PDF 19 KB
adjacent channel power and occupied bandwidth dataTest Report2008-02-15PDF 920 KB
frequency stability AFCTest Report2008-02-15PDF 578 KB
Annex A emission limitations of 90 543 test reportTest Report2007-06-22PDF 475.5 KB
Annex B spurious at antenna terminalsTest Report2007-06-22PDF 102.4 KB
Annex C field strength of spurious radiationsTest Report2007-06-22PDF 130.6 KB
data related to form 731 and test report bodyTest Report2007-06-22PDF 296 KB
description of the changes and test reportCover Letter(s)2005-09-09PDF 210.7 KB
mask H compliance plotsTest Report2004-11-04PDF 214.1 KB
test data and plot capturesTest Report2004-04-28PDF 192 KB
Mask compliance data required for the Class II permissive ChangeTest Report2002-04-12PDF 502.5 KB
compliance with 90 210 HTest Report2002-04-12PDF 505.5 KB
mask C compliance and data for Form 731Test Report2002-04-12PDF 369 KB
Engineering exhibit for 731 formTest Report2001-04-25PDF 93 KB
occupied bandwidth and emission designatorTest Report2000-09-01PDF 522.5 KB
test report and geberal dataTest Report2000-06-12PDF 386.7 KB
submission reportCover Letter(s)2008-02-15PDF 354.5 KB
Class II permissive change requestCover Letter(s)2007-06-22PDF 20.4 KB
letter for modifications in engineering statementCover Letter(s)2007-06-22PDF 20.4 KB
cover letterCover Letter(s)2004-11-04PDF 67.5 KB
engineering statementCover Letter(s)2004-04-28PDF 56.9 KB
Engineering report including a cover letterCover Letter(s)2003-01-14PDF 793.5 KB
engineering statementCover Letter(s)2002-04-12PDF 55 KB
engineering statement for class II permissive changeCover Letter(s)2002-04-12PDF 54 KB
request for confidentialityCover Letter(s)2000-06-12PDF 2.5 KB
MPE note on the certificateRF Exposure Info2007-06-22PDF 27.3 KB
RF exposure text existent on the EOTGPDB certificateRF Exposure Info2005-09-09PDF 27.3 KB
not required for this Class II Permissive ChangeParts List/Tune Up Info2002-04-12PDF 19 KB
Annex A MPE assesment and its report issued by AprelRF Exposure Info2001-04-25PDF 2.3 MB
Duty Factor for Categorical MPE Exclusion Metadata onlyRF Exposure Info2000-06-12PDF 4.6 KB
Evaluation for RF exposureRF Exposure Info2000-06-12PDF 132.7 KB
MPE compliance report IIRF Exposure Info2000-06-12PDF 167 KB
active parts listParts List/Tune Up Info2000-06-12PDF 13.7 KB
tune up procedureParts List/Tune Up Info2000-06-12PDF 11.2 KB

Application Information

Application ID+LmVwPYUFtp0ZBEdc+O/AA==
Final Action Date2008-02-15
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004069472
ModelGPDB
Frequency Range794-806 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionGemini
Responsible PartyRussell Cook, Director of Engineer, rcook@calamp.com , 612-642-2127
Technical ContactConstantin Pintilei, Dataradio Inc - a Calamp company, cpintilei@calamp.com , 514-737-0020
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 25%, controlled by protocol firmware. The antenna must be vehicle-mounted to provide a separation distance of 50 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.85 dBd (5.0 dBi) for satisfying RF exposure requirements.

Applications

Application IDDatePurpose
+LmVwPYUFtp0ZBEdc+O/AA==2008-02-15Class II permissive change or modification of presently authorized equipment
xeCTEbKwx1uQMOPQJ5N/5w==2007-06-22Class II permissive change or modification of presently authorized equipment
Du7BQajnR59VOVuqDnvEWA==2005-09-09Class II permissive change or modification of presently authorized equipment
/Faoek5xt2M9wdXiyLBAzA==2004-11-04Class II permissive change or modification of presently authorized equipment
kdYW96VMD91+jdKaINffwg==2004-04-28Class II permissive change or modification of presently authorized equipment
XiWn1hBvGkXKpkhr3OO8CA==2003-01-14Class II permissive change or modification of presently authorized equipment
TxRQ6LyV90tRlZok32qIpA==2002-04-12Class II permissive change or modification of presently authorized equipment
Sd8o/bpYwIxhcg/ywVmjeQ==2002-04-12Class II permissive change or modification of presently authorized equipment
ME3nxseAUftyT7+y46SIkw==2002-04-12Class II permissive change or modification of presently authorized equipment
tQ6OLwHfV+qsPucBDTAVGg==2001-04-25Class II permissive change or modification of presently authorized equipment
VxEZoQJdy1f8ZAum0opCLg==2000-09-01Class II permissive change or modification of presently authorized equipment
YdlvaaxLxijJHHB5i2CNgQ==2000-06-12Original Equipment
0K8vSVdWkq7vOkPuPk3GhQ==2000-06-12Class II permissive change or modification of presently authorized equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
794-806 MHz301.25ppm28K0F1D9BH
794-806 MHz301.5ppm28K0F1D9BH
794-806 MHz30300Hz16K0F1D9BH
794-806 MHz30300Hz14K4F1D9BH
794-806 MHz30300Hz7K10F1D9BH
806-824 MHz401.5ppm14K7F1D9BD
806-824 MHz401.5ppm8K60F1D9BD
806-824 MHz401.5ppm11K2F1D9BD
806-824 MHz401.5ppm14K1F1D9BD
806-824 MHz401.5ppm14K4F1D9BD
806-824 MHz401.5ppm10K5F1D9BD
806-824 MHz401.5ppm15K3F1D9BD
806-824 MHz401.5ppm15K0F1D9BD
806-824 MHz401.5ppm15K6F1D9BD
806-824 MHz401.5ppm16K0F1D9BD
806-824 MHz401.5ppm10K0F1D9BD
806-824 MHz401.5ppm11K0F1D9BD

Grants

TCB Grant - Application YdlvaaxLxijJHHB5i2CNgQ==

This application does not exist.

EAS Grant - Application YdlvaaxLxijJHHB5i2CNgQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 06/12/2000

Application Dated: 11/22/1999
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Gemini/PD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D

This application was originally granted on 04/28/2000.

Power output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 2%, controlled by protocol firmware, for satisfying MPE categorical exclusion requirements of 2.1091. The antenna must be vehicle-mounted to provide a separation distance of 20 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.73 dBd (4.477 dBi) for satisfying RF exposure requirements.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

TCB Grant - Application XiWn1hBvGkXKpkhr3OO8CA==

This application does not exist.

EAS Grant - Application XiWn1hBvGkXKpkhr3OO8CA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 01/14/2003

Application Dated: 12/19/2002
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: GeminiPD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K6F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 16K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K2F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K5F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K7F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K2F1D

Power output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 25%, controlled by protocol firmware. The antenna must be vehicle-mounted to provide a separation distance of 50 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.85 dBd (5.0 dBi) for satisfying RF exposure requirements.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

TCB Grant - Application xeCTEbKwx1uQMOPQJ5N/5w==

This application does not exist.

EAS Grant - Application xeCTEbKwx1uQMOPQJ5N/5w==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 06/22/2007

Application Dated: 05/22/2007
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Gemini
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K6F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 16K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K2F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K5F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K7F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K2F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K1F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K4F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K5F1D
BH 90 794.0  -  806.0 30.0 1.5  PM 28K0F1D

Power output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 25%, controlled by protocol firmware. The antenna must be vehicle-mounted to provide a separation distance of 50 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.85 dBd (5.0 dBi) for satisfying RF exposure requirements.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.
BH: The output power is continuously variable from the value listed in this entry to 30%-35% of the value listed.

TCB Grant - Application VxEZoQJdy1f8ZAum0opCLg==

This application does not exist.

EAS Grant - Application VxEZoQJdy1f8ZAum0opCLg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 09/01/2000

Application Dated: 08/15/2000
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Gemini/PD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K6F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 16K0F1D

The Grant of Certification for this unit was originally made on April 28, 2000.

Power output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 2%, controlled by protocol firmware, for satisfying MPE categorical exclusion requirements of 2.1091. The antenna must be vehicle-mounted to provide a separation distance of 20 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.73 dBd (4.477 dBi) for satisfying RF exposure requirements.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

TCB Grant - Application TxRQ6LyV90tRlZok32qIpA==

This application does not exist.

EAS Grant - Application TxRQ6LyV90tRlZok32qIpA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 04/12/2002

Application Dated: 03/25/2002
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Gemini/PD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K6F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 16K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K2F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K5F1D

Power output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 25%, controlled by protocol firmware. The antenna must be vehicle-mounted to provide a separation distance of 50 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.85 dBd (5.0 dBi) for satisfying RF exposure requirements.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

TCB Grant - Application tQ6OLwHfV+qsPucBDTAVGg==

This application does not exist.

EAS Grant - Application tQ6OLwHfV+qsPucBDTAVGg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 04/25/2001

Application Dated: 03/09/2001
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: GeminiPD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K6F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 16K0F1D

This Permissive Change/Modification was originally issued on 04/16/2001.

Power output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 25%, controlled by protocol firmware. The antenna must be vehicle-mounted to provide a separation distance of 50 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.85 dBd (5.0 dBi) for satisfying RF exposure requirements.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

TCB Grant - Application Sd8o/bpYwIxhcg/ywVmjeQ==

This application does not exist.

EAS Grant - Application Sd8o/bpYwIxhcg/ywVmjeQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 04/12/2002

Application Dated: 11/09/2001
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Gemini/PD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K6F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 16K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K0F1D

This Permissive Change/Modification was originally issued on 12/04/2001.

Power output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 25%, controlled by protocol firmware. The antenna must be vehicle-mounted to provide a separation distance of 50 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.85 dBd (5.0 dBi) for satisfying RF exposure requirements.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

TCB Grant - Application ME3nxseAUftyT7+y46SIkw==

This application does not exist.

EAS Grant - Application ME3nxseAUftyT7+y46SIkw==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 04/12/2002

Application Dated: 04/27/2001
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: GeminiPD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K6F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 16K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K0F1D

This Permissive Change/Modification was originally issued on 07/12/2001.

Power output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 25%, controlled by protocol firmware. The antenna must be vehicle-mounted to provide a separation distance of 50 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.85 dBd (5.0 dBi) for satisfying RF exposure requirements.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

TCB Grant - Application kdYW96VMD91+jdKaINffwg==

This application does not exist.

EAS Grant - Application kdYW96VMD91+jdKaINffwg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 04/28/2004

Application Dated: 04/08/2004
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: GeminiPD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K6F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 16K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K2F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K5F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K7F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K2F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K1F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K4F1D


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

TCB Grant - Application Du7BQajnR59VOVuqDnvEWA==

This application does not exist.

EAS Grant - Application Du7BQajnR59VOVuqDnvEWA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 09/09/2005

Application Dated: 08/01/2005
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Gemini
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K6F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 16K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K2F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K5F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K7F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K2F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K1F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K4F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K5F1D

Power output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 25%, controlled by protocol firmware. The antenna must be vehicle-mounted to provide a separation distance of 50 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.85 dBd (5.0 dBi) for satisfying RF exposure requirements.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

TCB Grant - Application 0K8vSVdWkq7vOkPuPk3GhQ==

This application does not exist.

EAS Grant - Application 0K8vSVdWkq7vOkPuPk3GhQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 06/12/2000

Application Dated: 05/18/2000
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Gemini/PD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D

Power output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 2%, controlled by protocol firmware, for satisfying MPE categorical exclusion requirements of 2.1091. The antenna must be vehicle-mounted to provide a separation distance of 20 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.73 dBd (4.477 dBi) for satisfying RF exposure requirements.

The Grant of Certification for this unit was originally made on April 28, 2000.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

TCB Grant - Application /Faoek5xt2M9wdXiyLBAzA==

This application does not exist.

EAS Grant - Application /Faoek5xt2M9wdXiyLBAzA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 11/04/2004

Application Dated: 09/29/2004
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Gemini
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K6F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 16K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K2F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K5F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K7F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K2F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K1F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K4F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K5F1D

Power output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 25%, controlled by protocol firmware. The antenna must be vehicle-mounted to provide a separation distance of 50 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.85 dBd (5.0 dBi) for satisfying RF exposure requirements.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

TCB Grant - Application +LmVwPYUFtp0ZBEdc+O/AA==

This application does not exist.

EAS Grant - Application +LmVwPYUFtp0ZBEdc+O/AA==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CALAMP WIRELESS NETWORKS INC.
117 Peavey Circle
Chaska, MN 55318
United States 		  Date of Grant: 02/15/2008

Application Dated: 01/16/2008
 
Attention: Russell Cook , Director of Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EOTGPDB
Name of Grantee:  CALAMP WIRELESS NETWORKS INC.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Gemini
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BD 90 806.0  -  824.0 40.0 1.5  PM 8K60F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K3F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 15K6F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 16K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K0F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K2F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K5F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K7F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 11K2F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K1F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 14K4F1D
BD 90 806.0  -  824.0 40.0 1.5  PM 10K5F1D
BH 90 794.0  -  806.0 30.0 1.25  PM 28K0F1D
BH 90 794.0  -  806.0 30.0 300.0  Hz 16K0F1D
BH 90 794.0  -  806.0 30.0 300.0  Hz 14K4F1D
BH 90 794.0  -  806.0 30.0 300.0  Hz 7K10F1D

Power output listed is at the antenna terminal of the transmitter. Device must operate with a maximum transmission duty factor not exceeding 25%, controlled by protocol firmware. The antenna must be vehicle-mounted to provide a separation distance of 50 cm or more from all persons and the antenna gain, including cable loss, must not exceed 2.85 dBd (5.0 dBi) for satisfying RF exposure requirements.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.
BH: The output power is continuously variable from the value listed in this entry to 30%-35% of the value listed.

Mail To: