FCC ID ESN-SP70
Smart-Phone with WLAN and BT
by Kinpo Electronics Inc
Grantee Code: ESN Product Code: SP70
Latest application date: 2006-11-02
FCC ID Device Details
| FCC ID | ESN-SP70 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ESN |
| Product Code | SP70 |
| Applicant Business | Kinpo Electronics Inc 🇹🇼 |
| Related Domains |  kinpo.com.tw  timcoengr.com |
| Equipment Class | Smart-Phone with WLAN and BT |
| Test Firm | SPORTON International Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-11-02 |
| 1850.2-1909.8 MHz | Class II permissive change or modification of presently authorized equipment | 2006-11-02 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2006-11-02 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2006-07-14 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-07-14 |
| 1850.2-1909.8 MHz | Class II permissive change or modification of presently authorized equipment | 2006-07-14 |
| 1850.2-1909.8 MHz | Class II permissive change or modification of presently authorized equipment | 2006-07-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2006-07-12 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-07-12 |
| 1850.2-1909.8 MHz | Original Equipment | 2006-03-15 |
| 2402-2480 MHz | Original Equipment | 2006-03-15 |
| 2412-2462 MHz | Original Equipment | 2006-03-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| manual 1 of 2 | Users Manual | 2006-07-14 | PDF 2.9 MB |
| manual 2 of 2 | Users Manual | 2006-07-14 | PDF 1.9 MB |
| USERS MANUAL 2 | Users Manual | 2006-03-15 | PDF 1.9 MB |
| USERS MANUAL 1 | Users Manual | 2006-03-15 | PDF 1.9 MB |
| USERS MANUAL 1 Metadata only | Users Manual | 2006-03-15 | PDF 2.7 MB |
| Users Manual 1 of 2 | Users Manual | 2006-03-15 | PDF 2.7 MB |
| Users Manual 2 of 2 | Users Manual | 2006-03-15 | PDF 2 MB |
| revised internal photos | Internal Photos | 2006-11-02 | PDF 401.6 KB |
| internal photos | Internal Photos | 2006-07-14 | PDF 401.6 KB |
| INTERNAL PHOTOS | Internal Photos | 2006-03-15 | PDF 443.5 KB |
| INTERNAL PHOTOS | Internal Photos | 2006-03-15 | PDF 454.2 KB |
| EXTERNAL PHOTOS | External Photos | 2006-07-14 | PDF 276.1 KB |
| EXTERNAL PHOTOS | External Photos | 2006-03-15 | PDF 585.4 KB |
| LABEL LOCATION | ID Label/Location Info | 2006-03-15 | PDF 37.1 KB |
| LABEL SAMPLE | ID Label/Location Info | 2006-03-15 | PDF 314 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2006-03-15 | PDF 194.1 KB |
| test report | Test Report | 2006-11-02 | PDF 3.2 MB |
| TEST REPORT | Test Report | 2006-07-14 | PDF 3.2 MB |
| TEST REPORT | Test Report | 2006-07-14 | PDF 2.8 MB |
| test report | Test Report | 2006-07-12 | PDF 2 MB |
| TEST REPORT | Test Report | 2006-03-15 | PDF 1.9 MB |
| TEST REPORT | Test Report | 2006-03-15 | PDF 2.7 MB |
| ATTESTATION STATEMENT | Attestation Statements | 2006-07-14 | PDF 14 KB |
| ATTESTATION STATEMENT | Attestation Statements | 2006-03-15 | PDF 417.6 KB |
| cover letter | Cover Letter(s) | 2006-11-02 | PDF 11.3 KB |
| COVER LETTER | Cover Letter(s) | 2006-07-14 | PDF 15.6 KB |
| cover letter | Cover Letter(s) | 2006-07-12 | PDF 14.6 KB |
| cover letter | Cover Letter(s) | 2006-07-12 | PDF 13.6 KB |
| request for correction | Cover Letter(s) | 2006-07-12 | PDF 88.1 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2006-03-15 | PDF 257.3 KB |
| sar report | RF Exposure Info | 2006-11-02 | PDF 3.6 MB |
| sar report | RF Exposure Info | 2006-11-02 | PDF 3.5 MB |
| RF EXPOSURE | RF Exposure Info | 2006-07-14 | PDF 2.6 MB |
| RF EXPOSURE | RF Exposure Info | 2006-07-14 | PDF 3.9 MB |
| gsm rf exposure info | RF Exposure Info | 2006-07-12 | PDF 2.7 MB |
| rf exposure | RF Exposure Info | 2006-07-12 | PDF 2.7 MB |
| rf exposure | RF Exposure Info | 2006-07-12 | PDF 2.7 MB |
| wlan rf exposure info | RF Exposure Info | 2006-07-12 | PDF 2.7 MB |
| RF EXPOSURE | RF Exposure Info | 2006-03-15 | PDF 28.7 KB |
| RF EXPOSURE | RF Exposure Info | 2006-03-15 | PDF 2.8 MB |
| RF EXPOSURE 1 Metadata only | RF Exposure Info | 2006-03-15 | PDF 2.8 MB |
| RF EXPOSURE 2 Metadata only | RF Exposure Info | 2006-03-15 | PDF 1.7 MB |
| SAR report | RF Exposure Info | 2006-03-15 | PDF 2.7 MB |
| BLOCK DIAGRAM Metadata only | Block Diagram | PDF 283 KB | |
| SCHEMATICS Metadata only | Schematics | PDF 519.4 KB | |
| OEPRATIONAL DESCRIPTION Metadata only | Operational Description | PDF 9.7 KB | |
| OPERATIONAL DESCRIPTION Metadata only | Operational Description | PDF 84.3 KB | |
| OPERATIONAL DESCRIPTION Metadata only | Operational Description | PDF 11.4 KB | |
| PARTS LIST Metadata only | Parts List/Tune Up Info | PDF 92.3 KB | |
| TUNEUP PROCEDURE Metadata only | Parts List/Tune Up Info | PDF 8 KB |
Application Information
| Application ID | M7IZB0rmwlGbsqL+71iUBg== |
|---|---|
| Final Action Date | 2006-11-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024982571 |
| Model | SP70 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Smart-Phone with WLAN and BT |
| Responsible Party | Chilin Chiang, Engineer, chilin@kinpo.com.tw , 886 2 2662-2660 |
| Technical Contact | Sid Sanders, Timco Engineering Inc., tei@timcoengr.com , 352-472-5500 |
| Non-Technical Contact | Gretchen Torres, Timco Engineering Inc., tei@timcoengr.com , 352-472-5500 |
| Test Firm | Kathy Lin, SPORTON International Inc, kathylin@sporton.com.tw  , 886-2-2696-2468 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is EIRP. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the users' body. SAR compliance for specific co-located transmitter conditions was evaluated for near-body operating configurations as described in this composite filing; other co-located configurations require separate evaluation. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR values under this FCC ID are: Part 24 - head 0.20 W/kg, body 0.67 W/kg; Part 15 - head 0.11 W/kg, body 0.14 W/kg; co-transmit - head 0.23 W/kg, body 0.87 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| M7IZB0rmwlGbsqL+71iUBg== | 2006-11-02 | Class II permissive change or modification of presently authorized equipment |
| Bdzi4Ns49raxK2AKTKAb/Q== | 2006-11-02 | Class II permissive change or modification of presently authorized equipment |
| 7td5tHcCFN/oxNJwGodb2Q== | 2006-11-02 | Class II permissive change or modification of presently authorized equipment |
| mOrzj0WiRreb44Q5WuHa/Q== | 2006-07-14 | Class II permissive change or modification of presently authorized equipment |
| i49fSoOefcGTk4c8B/RgaQ== | 2006-07-14 | Class II permissive change or modification of presently authorized equipment |
| TTGuuYXGSYT59SXqNRYKkQ== | 2006-07-14 | Class II permissive change or modification of presently authorized equipment |
| y4vyBTw389PDRSx6Yi7uWQ== | 2006-07-12 | Class II permissive change or modification of presently authorized equipment |
| ZG72gIScUXELcerqeXfCrw== | 2006-07-12 | Class II permissive change or modification of presently authorized equipment |
| KlMrLAb+lakkvjRaQwgvUQ== | 2006-07-12 | Class II permissive change or modification of presently authorized equipment |
| nU9g+O6FzOKEXOQMAMx16g== | 2006-03-15 | Original Equipment |
| hH0DFxFS6Wj8suGReJlu7Q== | 2006-03-15 | Original Equipment |
| QzEc5F5j8qrhYJ0cMZrg6A== | 2006-03-15 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZG72gIScUXELcerqeXfCrw==
This application does not exist.
EAS Grant - Application ZG72gIScUXELcerqeXfCrw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kinpo Electronics Inc 147, SEC. 3, BEISHEN RD., SHENKENG DIST., NEW TAIPEI CITY 222, TAIWAN R.O.C NEW TAIPEI CITY, 222 Taiwan |
Date of Grant: 07/12/2006 Application Dated: 05/18/2006 |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart-Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. Installers must be provided with antenna installation instructions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sid Sanders, | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Timco Engineering Inc. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 370849 NW State Road 45 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Newberry, FL 32669 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kinpo Electronics Inc 147, SEC. 3, BEISHEN RD., SHENKENG DIST., NEW TAIPEI CITY 222, TAIWAN R.O.C NEW TAIPEI CITY, 222 Taiwan |
Date of Grant: 07/12/2006 Application Dated: 04/13/2006 |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Smart-Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1850.2 - 1909.8 | 1.74 | 0.06 PM | 300KGXW |
| Power listed is EIRP. The maximum conducted output powers are 839mW. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific co-located transmitter conditions was evaluated for near-body operating configurations as described in this composite filing; other co-located configurations require separate evaluation. The highest reported co-located SAR levels are: Head: 0.67 W/kg; Body: 0.78 W/kg. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains 900/1800 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz PCS operations.
|
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sid Sanders, President | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Timco Engineering Inc. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 370849 NW State Road 45 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Newberry, FL 32669 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/14/2006 Application Dated: 07/14/2006 |
| Kinpo Electronics Inc |
| 147, SEC. 3, BEISHEN RD., SHENKENG DIST., |
| NEW TAIPEI CITY 222, TAIWAN R.O.C |
| NEW TAIPEI CITY, 222 Taiwan |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | SMART- PHONE WITH WLAN, BT, AND GSM/ GPRS |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1850.2 - 1909.8 | 1.74 | 0.06 PM | 300KGXW |
| Power listed is EIRP. The maximum conducted output powers are 839mW. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific co-located transmitter conditions was evaluated for near-body operating configurations as described in this composite filing; other co-located configurations require separate evaluation. The highest reported co-located SAR levels are: Head: 0.20 W/kg; Body: 0.67 W/kg. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains 900/1800 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz PCS operations. |
EAS Grant - Application TTGuuYXGSYT59SXqNRYKkQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kinpo Electronics Inc 147, SEC. 3, BEISHEN RD., SHENKENG DIST., NEW TAIPEI CITY 222, TAIWAN R.O.C NEW TAIPEI CITY, 222 Taiwan |
Date of Grant: 07/14/2006 Application Dated: 07/14/2006 |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | SMART- PHONE WITH WLAN, BT, AND GSM/ GPRS |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1850.2 - 1909.8 | 1.74 | 0.06 PM | 300KGXW |
| Power listed is EIRP. The maximum conducted output powers are 839mW. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific co-located transmitter conditions was evaluated for near-body operating configurations as described in this composite filing; other co-located configurations require separate evaluation. The highest reported co-located SAR levels are: Head: 0.20 W/kg; Body: 0.67 W/kg. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains 900/1800 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz PCS operations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/15/2006 Application Dated: 03/15/2006 |
| Kinpo Electronics Inc |
| 147, SEC. 3, BEISHEN RD., SHENKENG DIST., |
| NEW TAIPEI CITY 222, TAIWAN R.O.C |
| NEW TAIPEI CITY, 222 Taiwan |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | SMART-PHONE WITH WLAN, BT, AND GSM/ GPRS |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.074 |
| Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific co-located transmitter conditions was evaluated for the near-body configurations as shown in this composite filing; other co-located configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The maximum reported co-located SAR value for this composite filing is: Body 0.47 W/kg. |
EAS Grant - Application QzEc5F5j8qrhYJ0cMZrg6A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kinpo Electronics Inc 147, SEC. 3, BEISHEN RD., SHENKENG DIST., NEW TAIPEI CITY 222, TAIWAN R.O.C NEW TAIPEI CITY, 222 Taiwan |
Date of Grant: 03/15/2006 Application Dated: 03/15/2006 |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | SMART-PHONE WITH WLAN, BT, AND GSM/ GPRS |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.074 |
| Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific co-located transmitter conditions was evaluated for the near-body configurations as shown in this composite filing; other co-located configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The maximum reported co-located SAR value for this composite filing is: Body 0.47 W/kg. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/15/2006 Application Dated: 03/15/2006 |
| Kinpo Electronics Inc |
| 147, SEC. 3, BEISHEN RD., SHENKENG DIST., |
| NEW TAIPEI CITY 222, TAIWAN R.O.C |
| NEW TAIPEI CITY, 222 Taiwan |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | SMART-PHONE WITH WLAN, BT, AND GSM/GPRS |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1850.2 - 1909.8 | 1.74 | 0.06 PM | 300KGXW |
| Power listed is EIRP. The maximum conducted output powers are 839mW. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific co-located transmitter conditions was evaluated for near-body operating configurations as described in this composite filing; other co-located configurations require separate evaluation. The highest reported co-located SAR levels are: Head: 0.19 W/kg; Body: 0.65 W/kg. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains 900/1800 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz PCS operations. |
EAS Grant - Application nU9g+O6FzOKEXOQMAMx16g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kinpo Electronics Inc 147, SEC. 3, BEISHEN RD., SHENKENG DIST., NEW TAIPEI CITY 222, TAIWAN R.O.C NEW TAIPEI CITY, 222 Taiwan |
Date of Grant: 03/15/2006 Application Dated: 03/15/2006 |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | SMART-PHONE WITH WLAN, BT, AND GSM/GPRS |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1850.2 - 1909.8 | 1.74 | 0.06 PM | 300KGXW |
| Power listed is EIRP. The maximum conducted output powers are 839mW. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific co-located transmitter conditions was evaluated for near-body operating configurations as described in this composite filing; other co-located configurations require separate evaluation. The highest reported co-located SAR levels are: Head: 0.19 W/kg; Body: 0.65 W/kg. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains 900/1800 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz PCS operations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/14/2006 Application Dated: 07/14/2006 |
| Kinpo Electronics Inc |
| 147, SEC. 3, BEISHEN RD., SHENKENG DIST., |
| NEW TAIPEI CITY 222, TAIWAN R.O.C |
| NEW TAIPEI CITY, 222 Taiwan |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SMART-PHONE WITH WLAN, BT, AND GSM/ GPRS |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. Installers must be provided with antenna installation instructions for satisfying RF exposure compliance. |
EAS Grant - Application mOrzj0WiRreb44Q5WuHa/Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kinpo Electronics Inc 147, SEC. 3, BEISHEN RD., SHENKENG DIST., NEW TAIPEI CITY 222, TAIWAN R.O.C NEW TAIPEI CITY, 222 Taiwan |
Date of Grant: 07/14/2006 Application Dated: 07/14/2006 |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SMART-PHONE WITH WLAN, BT, AND GSM/ GPRS |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. Installers must be provided with antenna installation instructions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kinpo Electronics Inc 147, SEC. 3, BEISHEN RD., SHENKENG DIST., NEW TAIPEI CITY 222, TAIWAN R.O.C NEW TAIPEI CITY, 222 Taiwan |
Date of Grant: 11/02/2006 Application Dated: 08/21/2006 |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart-Phone with WLAN and BT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.074 |
| Power listed is EIRP. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the users' body. SAR compliance for specific co-located transmitter conditions was evaluated for near-body operating configurations as described in this composite filing; other co-located configurations require separate evaluation. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR values under this FCC ID are: Part 24 - head 0.20 W/kg, body 0.67 W/kg; Part 15 - head 0.11 W/kg, body 0.14 W/kg; co-transmit - head 0.23 W/kg, body 0.87 W/kg. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sid Sanders, President | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Timco Engineering Inc. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 370849 NW State Road 45 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Newberry, FL 32669 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kinpo Electronics Inc 147, SEC. 3, BEISHEN RD., SHENKENG DIST., NEW TAIPEI CITY 222, TAIWAN R.O.C NEW TAIPEI CITY, 222 Taiwan |
Date of Grant: 07/12/2006 Application Dated: 04/24/2006 |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart-Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.074 |
| Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. SAR compliance for specific co-located transmitter conditions was evaluated for the near-body configurations as shown in this composite filing; other co-located configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The maximum reported co-located SAR value for this composite filing are: Head: 0.67 W/kg; Body: 0.78 W/kg. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sid Sanders, President | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Timco Engineering Inc. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 849 NW State Road 45 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Newberry, FL 32669 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/14/2006 Application Dated: 07/14/2006 |
| Kinpo Electronics Inc |
| 147, SEC. 3, BEISHEN RD., SHENKENG DIST., |
| NEW TAIPEI CITY 222, TAIWAN R.O.C |
| NEW TAIPEI CITY, 222 Taiwan |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | SMART-PHONE WITH WLAN, BT, AND GSM/ GPRS |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.074 |
| Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific co-located transmitter conditions was evaluated for the near-body configurations as shown in this composite filing; other co-located configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The maximum reported co-located SAR value for this composite filing is: Body 0.126 W/kg. |
EAS Grant - Application i49fSoOefcGTk4c8B/RgaQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kinpo Electronics Inc 147, SEC. 3, BEISHEN RD., SHENKENG DIST., NEW TAIPEI CITY 222, TAIWAN R.O.C NEW TAIPEI CITY, 222 Taiwan |
Date of Grant: 07/14/2006 Application Dated: 07/14/2006 |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | SMART-PHONE WITH WLAN, BT, AND GSM/ GPRS |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.074 |
| Power listed is conducted. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the users body. SAR compliance for specific co-located transmitter conditions was evaluated for the near-body configurations as shown in this composite filing; other co-located configurations require separate evaluation. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The maximum reported co-located SAR value for this composite filing is: Body 0.126 W/kg. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/15/2006 Application Dated: 03/15/2006 |
| Kinpo Electronics Inc |
| 147, SEC. 3, BEISHEN RD., SHENKENG DIST., |
| NEW TAIPEI CITY 222, TAIWAN R.O.C |
| NEW TAIPEI CITY, 222 Taiwan |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SMART-PHONE WITH WLAN, BT, AND GSM/GPRS |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. Installers must be provided with antenna installation instructions for satisfying RF exposure compliance. |
EAS Grant - Application hH0DFxFS6Wj8suGReJlu7Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kinpo Electronics Inc 147, SEC. 3, BEISHEN RD., SHENKENG DIST., NEW TAIPEI CITY 222, TAIWAN R.O.C NEW TAIPEI CITY, 222 Taiwan |
Date of Grant: 03/15/2006 Application Dated: 03/15/2006 |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SMART-PHONE WITH WLAN, BT, AND GSM/GPRS |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. Installers must be provided with antenna installation instructions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kinpo Electronics Inc 147, SEC. 3, BEISHEN RD., SHENKENG DIST., NEW TAIPEI CITY 222, TAIWAN R.O.C NEW TAIPEI CITY, 222 Taiwan |
Date of Grant: 11/02/2006 Application Dated: 08/21/2006 |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Smart-Phone with WLAN and BT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1850.2 - 1909.8 | 1.74 | 0.06 PM | 300KGXW |
| Power listed is EIRP. The maximum conducted output power is 839mW. This device contains 900/1800 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz PCS operations. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the users' body. SAR compliance for specific co-located transmitter conditions was evaluated for near-body operating configurations as described in this composite filing; other co-located configurations require separate evaluation. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR values under this FCC ID are: Part 24 - head 0.20 W/kg, body 0.67 W/kg; Part 15 - head 0.11 W/kg, body 0.14 W/kg; co-transmit - head 0.23 W/kg, body 0.87 W/kg.
|
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||
| Sid Sanders, President | ||||||||||||||||||||||||||||||||||||||||||||
| Timco Engineering Inc. | ||||||||||||||||||||||||||||||||||||||||||||
| 370849 NW State Road 45 | ||||||||||||||||||||||||||||||||||||||||||||
| Newberry, FL 32669 | ||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Kinpo Electronics Inc 147, SEC. 3, BEISHEN RD., SHENKENG DIST., NEW TAIPEI CITY 222, TAIWAN R.O.C NEW TAIPEI CITY, 222 Taiwan |
Date of Grant: 11/02/2006 Application Dated: 08/21/2006 |
| Attention: Chilin Chiang , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ESN-SP70 |
| Name of Grantee: | Kinpo Electronics Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart-Phone with WLAN and BT |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 |
| Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this composite filing. Installers must be provided with antenna installation instructions for satisfying RF exposure compliance. |
| Mail To: |
| Sid Sanders, President |
| Timco Engineering Inc. |
| 370849 NW State Road 45 |
| Newberry, FL 32669 |