FCC ID EW4DWMW051
WiFi Module
by Mitsumi Electric Co Ltd
Grantee Code: EW4 Product Code: DWMW051
Latest application date: 2013-08-15
FCC ID Device Details
| FCC ID | EW4DWMW051 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | EW4 |
| Product Code | DWMW051 |
| Applicant Business | Mitsumi Electric Co Ltd 🇯🇵 |
| Related Domains |  mitsumi.co.jp |
| Equipment Class | WiFi Module |
| Test Firm | Compliance Certification Services |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-08-15 |
| 2412-2462 MHz | Original Equipment | 2012-07-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2012-07-11 | PDF 42.8 KB |
| Internal photos | Internal Photos | 2013-08-15 | PDF 67.5 KB |
| Internal Photos | Internal Photos | 2012-07-11 | PDF 305.7 KB |
| External Photographs | External Photos | 2012-07-11 | PDF 127.2 KB |
| Label and location | ID Label/Location Info | 2012-07-11 | PDF 114.5 KB |
| Test setup photos | Test Setup Photos | 2013-08-15 | PDF 356.5 KB |
| Test Set Up Photos | Test Setup Photos | 2012-07-11 | PDF 428.7 KB |
| Test report | Test Report | 2013-08-15 | PDF 1.8 MB |
| Test report | Test Report | 2012-07-11 | PDF 4.9 MB |
| Agent authorization | Cover Letter(s) | 2013-08-15 | PDF 415.6 KB |
| C2PC letter | Cover Letter(s) | 2013-08-15 | PDF 68.1 KB |
| Agent Authorization | Cover Letter(s) | 2012-07-11 | PDF 1.5 MB |
| Confidentiality Request | Cover Letter(s) | 2012-07-11 | PDF 691.1 KB |
| Modular Approval Cover Letter | Cover Letter(s) | 2012-07-11 | PDF 62.3 KB |
| MPE Calculations | RF Exposure Info | 2012-07-11 | PDF 346 KB |
Application Information
| Application ID | UqYIyfC4hNIeh9zxQ49YtQ== |
|---|---|
| Final Action Date | 2013-08-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011565389 |
| Model | DWMW051 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WiFi Module |
| Responsible Party | Masashi Tsuchida, tsuchida.masashi@mitsumi.co.jp , 81-42-310-5822 |
| Test Firm | Thu Chan, Compliance Certification Services, thu.chan@ccsemc.com  , 510-771-1122 |
| TCB Email | LST.FRE.CertNotice@ul.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change filing to alternate second source components as documented in this filing. Output power listed is conducted peak power. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| UqYIyfC4hNIeh9zxQ49YtQ== | 2013-08-15 | Class II permissive change or modification of presently authorized equipment |
| Vw1gGmfLZpUHzOqJmxQr+g== | 2012-07-11 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.2594200 | 15C |
Grants
TCB Grant - Application Vw1gGmfLZpUHzOqJmxQr+g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/11/2012 Application Dated: 07/11/2012 |
| Mitsumi Electric Co Ltd |
| 2-11-2,Tsurumaki,Tama-shi |
| Tokyo,206-8567, Japan |
| Attention: Masashi Tsuchida |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EW4DWMW051 |
| Name of Grantee: | Mitsumi Electric Co Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.25942 |
| Output power listed is conducted peak power. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application Vw1gGmfLZpUHzOqJmxQr+g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Mitsumi Electric Co Ltd 2-11-2,Tsurumaki,Tama-shi Tokyo,206-8567, Japan |
Date of Grant: 07/11/2012 Application Dated: 07/11/2012 |
| Attention: Masashi Tsuchida |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EW4DWMW051 |
| Name of Grantee: | Mitsumi Electric Co Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.25942 |
| Output power listed is conducted peak power. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/15/2013 Application Dated: 08/15/2013 |
| Mitsumi Electric Co Ltd |
| 2-11-2,Tsurumaki,Tama-shi |
| Tokyo,206-8567, Japan |
| Attention: Masashi Tsuchida |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EW4DWMW051 |
| Name of Grantee: | Mitsumi Electric Co Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.25942 |
| Class II Permissive Change filing to alternate second source components as documented in this filing. Output power listed is conducted peak power. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application UqYIyfC4hNIeh9zxQ49YtQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Mitsumi Electric Co Ltd 2-11-2,Tsurumaki,Tama-shi Tokyo,206-8567, Japan |
Date of Grant: 08/15/2013 Application Dated: 08/15/2013 |
| Attention: Masashi Tsuchida |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EW4DWMW051 |
| Name of Grantee: | Mitsumi Electric Co Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.25942 |
| Class II Permissive Change filing to alternate second source components as documented in this filing. Output power listed is conducted peak power. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |