FCC ID EW780-6101-00
Cordless Telephone System with BT Enabled Base
by VTech Telecommunications Ltd
Grantee Code: EW7 Product Code: 80610100
Latest application date: 2007-08-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2007-08-09 |
| 2402-2480 MHz | Original Equipment | 2007-03-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual part 1 | Users Manual | 2007-08-09 | PDF 2.3 MB |
| User Manual part 2 | Users Manual | 2007-08-09 | PDF 2.1 MB |
| Part 15 statement | Users Manual | 2007-04-23 | PDF 33.3 KB |
| Part A | Users Manual | 2007-04-23 | PDF 2 MB |
| Part B | Users Manual | 2007-04-23 | PDF 2.1 MB |
| Part C | Users Manual | 2007-04-23 | PDF 2.2 MB |
| Part D | Users Manual | 2007-04-23 | PDF 1.3 MB |
| Part E | Users Manual | 2007-04-23 | PDF 1.5 MB |
| Internal Photo | Internal Photos | 2007-08-09 | PDF 882.2 KB |
| Internal photos Base | Internal Photos | 2007-04-23 | PDF 502.2 KB |
| Internal photos Handset | Internal Photos | 2007-04-23 | PDF 355.1 KB |
| External photo | External Photos | 2007-08-09 | PDF 297.9 KB |
| External photos | External Photos | 2007-04-23 | PDF 328.2 KB |
| Label | ID Label/Location Info | 2007-08-09 | PDF 758.9 KB |
| Label | ID Label/Location Info | 2007-03-09 | PDF 1.9 MB |
| Base Test setup photo | Test Setup Photos | 2007-08-09 | PDF 58.1 KB |
| Handset setup photo | Test Setup Photos | 2007-08-09 | PDF 170.4 KB |
| Setup photos 1 | Test Setup Photos | 2007-04-23 | PDF 1.5 MB |
| Setup photos 2 | Test Setup Photos | 2007-04-23 | PDF 1.5 MB |
| Base test report | Test Report | 2007-08-09 | PDF 451 KB |
| Handset test report | Test Report | 2007-08-09 | PDF 474.7 KB |
| Base | Test Report | 2007-03-09 | PDF 2.1 MB |
| Handset | Test Report | 2007-03-09 | PDF 1.4 MB |
| Agent Letter | Cover Letter(s) | 2007-08-09 | PDF 47.4 KB |
| Class II permissive change letter | Cover Letter(s) | 2007-08-09 | PDF 34.3 KB |
| Confidentiality letter | Cover Letter(s) | 2007-08-09 | PDF 28 KB |
| Authority | Cover Letter(s) | 2007-03-09 | PDF 114.2 KB |
| Confidentiality | Cover Letter(s) | 2007-03-09 | PDF 75.2 KB |
| Handset SAR report | RF Exposure Info | 2007-08-09 | PDF 3.3 MB |
| MPE base | RF Exposure Info | 2007-08-09 | PDF 24.4 KB |
| MPE base bluetooth | RF Exposure Info | 2007-08-09 | PDF 24.4 KB |
| MPE bluetooth | RF Exposure Info | 2007-03-09 | PDF 24.4 KB |
| MPE phone | RF Exposure Info | 2007-03-09 | PDF 24.4 KB |
| SAR 1 | RF Exposure Info | 2007-03-09 | PDF 2.5 MB |
| SAR 2 | RF Exposure Info | 2007-03-09 | PDF 1.1 MB |
Application Information
| Application ID | VrMRDwghhBSqNmm6XCLhiA== |
|---|---|
| Final Action Date | 2007-08-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015973951 |
| Model | 80-6101-00 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Cordless Telephone System with BT Enabled Base |
| Responsible Party | Michael Tsui, Approbation Supervisor, michael_tsui@vtech.com |
| Technical Contact | Joanna Olszanowska, Nemko Canada, joanna.olszanowska@nemko.com |
| Non-Technical Contact | Joanna Olszanowska, Nemko Canada, joanna.olszanowska@nemko.com |
| Test Firm | Stuart Beck, Nemko Canada Inc., stuart.beck@nemko.com |
| TCB Email | stuart.beck@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Conducted output power is 610 mW for the base-unit, 326 mW for the handset and 2.3 mW for BlueTooth. The antenna(s) used for the base-unit must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific belt-clip tested for this filing. The highest reported SAR values are: head 1.57 W/kg; body 0.450 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| VrMRDwghhBSqNmm6XCLhiA== | 2007-08-09 | Class II permissive change or modification of presently authorized equipment |
| CXlkfONRRzNF4/Zf2Xq3og== | 2007-03-09 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application VrMRDwghhBSqNmm6XCLhiA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada | Date of Grant: 08/09/2007 Application Dated: 08/08/2007 |
| VTech Telecommunications Ltd |
| 23/F Tai Ping Ind Center Block 1 |
| 57 Ting Kok Rd |
| Tai Po NT, Hong Kong |
| Attention: Michael Tsui , Approbation Supervisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EW780-6101-00 |
| Name of Grantee: | VTech Telecommunications Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Cordless Telephone System with BT Enabled Base |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 | 15C | 5744.736 - 5825.952 | 0.61 | ||
| 68 | 15C | 2402.0 - 2480.0 | 0.0023 | ||
| 68 | 15C | 5744.736 - 5825.952 | 0.326 |
| Conducted output power is 610 mW for the base-unit, 326 mW for the handset and 2.3 mW for BlueTooth. The antenna(s) used for the base-unit must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific belt-clip tested for this filing. The highest reported SAR values are: head 1.57 W/kg; body 0.450 W/kg. |
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
EAS Grant - Application VrMRDwghhBSqNmm6XCLhiA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| VTech Telecommunications Ltd 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong | Date of Grant: 08/09/2007 Application Dated: 08/08/2007 |
| Attention: Michael Tsui , Approbation Supervisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EW780-6101-00 |
| Name of Grantee: | VTech Telecommunications Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Cordless Telephone System with BT Enabled Base |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 | 15C | 5744.736 - 5825.952 | 0.61 | ||
| 68 | 15C | 2402.0 - 2480.0 | 0.0023 | ||
| 68 | 15C | 5744.736 - 5825.952 | 0.326 |
| Conducted output power is 610 mW for the base-unit, 326 mW for the handset and 2.3 mW for BlueTooth. The antenna(s) used for the base-unit must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific belt-clip tested for this filing. The highest reported SAR values are: head 1.57 W/kg; body 0.450 W/kg.
|
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| Mail To: |
| EA225138 |
TCB Grant - Application CXlkfONRRzNF4/Zf2Xq3og==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada | Date of Grant: 03/09/2007 Application Dated: 03/09/2007 |
| VTech Telecommunications Ltd |
| 23/F Tai Ping Ind Center Block 1 |
| 57 Ting Kok Rd |
| Tai Po NT, Hong Kong |
| Attention: Michael Tsui , Approbation Supervisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EW780-6101-00 |
| Name of Grantee: | VTech Telecommunications Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Cordless Telephone System with BT Enabled Base |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 | 15C | 5744.736 - 5825.952 | 0.61 | ||
| 68 | 15C | 2402.0 - 2480.0 | 0.0023 | ||
| 68 | 15C | 5744.736 - 5825.952 | 0.326 |
| Conducted output power is 610 mW for the base-unit, 326 mW for the handset and 2.3 mW for BlueTooth. The antenna(s) used for the base-unit must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific belt-clip tested for this filing. The highest reported SAR values are: head 0.479 W/kg; body 0.450 W/kg. |
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
EAS Grant - Application CXlkfONRRzNF4/Zf2Xq3og==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| VTech Telecommunications Ltd 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong | Date of Grant: 03/09/2007 Application Dated: 03/09/2007 |
| Attention: Michael Tsui , Approbation Supervisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | EW780-6101-00 |
| Name of Grantee: | VTech Telecommunications Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Cordless Telephone System with BT Enabled Base |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 68 | 15C | 5744.736 - 5825.952 | 0.61 | ||
| 68 | 15C | 2402.0 - 2480.0 | 0.0023 | ||
| 68 | 15C | 5744.736 - 5825.952 | 0.326 |
| Conducted output power is 610 mW for the base-unit, 326 mW for the handset and 2.3 mW for BlueTooth. The antenna(s) used for the base-unit must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific belt-clip tested for this filing. The highest reported SAR values are: head 0.479 W/kg; body 0.450 W/kg.
|
| 68: | This grant does not pertain to equipment approval requirements under Part 68. |
| Mail To: |
| EA504009 |