1. FCC ID
  2. EZZ
  3. EZZ5PI001103

FCC ID EZZ5PI001103

One-Way Signal Booster Amplifier

by Bird Technologies Group

Grantee Code: EZZ   Product Code: 5PI001103
Latest application date: 2001-02-27

FCC ID Device Details

FCC IDEZZ5PI001103
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeEZZ
Product Code5PI001103
Applicant BusinessBird Technologies Group 🇺🇸
Related Domains bird-technologies.com
Equipment ClassOne-Way Signal Booster Amplifier
Test FirmHyak Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
929-932 MHzOriginal Equipment2001-02-27

Exhibits

DocumentTypeAvailableFile
users manualUsers Manual2001-02-27PDF 1.7 MB
internal photosInternal Photos2001-02-27PDF 296.5 KB
external photosExternal Photos2001-02-27PDF 459 KB
label sample and locationID Label/Location Info2001-02-27PDF 61 KB
RF circuit board schematicSchematics2001-02-27PDF 286.6 KB
alignment proceduresSchematics2001-02-27PDF 443.9 KB
operational descriptionOperational Description2001-02-27PDF 19 KB
test reportTest Report2001-02-27PDF 1.8 MB
commsumyCover Letter(s)2001-02-27PDF 24 KB
alignment proceduresParts List/Tune Up Info2001-02-27PDF 443.9 KB

Application Information

Application IDazEgBwclNgZGxVsNlpuXnw==
Final Action Date2001-02-27
Application PurposeOriginal Equipment
Applicant FRN0003407350
Model5PI001103
Frequency Range929-932 MHz
Equipment ClassAMP - Amplifier
Device DescriptionOne-Way Signal Booster Amplifier
Responsible PartyAmy Sanvido, RF Engineer, asanvido@bird-technologies.com , (440) 519-2179
Test FirmRowland Johnson, Hyak Laboratories, Inc., 703-451-1188
TCB Emailtei@timcoengr.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of §1.1307(b)(3).

Applications

Application IDDatePurpose
azEgBwclNgZGxVsNlpuXnw==2001-02-27Original Equipment

Equipment Authorization

FrequencyOutputEmissionRules
929-932 MHz0.7G2B22, 9
929-932 MHz0.7G2D22, 9
929-932 MHz0.7G3E22, 9
929-932 MHz0.7F3E22, 9
929-932 MHz0.7A1D22, 9
929-932 MHz0.7A2B22, 9
929-932 MHz0.7A2D22, 9
929-932 MHz0.7F1B22, 9
929-932 MHz0.7F1D22, 9
929-932 MHz0.7F2B22, 9
929-932 MHz0.7F2D22, 9
929-932 MHz0.7G1B22, 9

Grants

TCB Grant - Application azEgBwclNgZGxVsNlpuXnw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 02/27/2001

Application Dated: 02/27/2001
Bird Technologies Group
30303 Aurora Rd.
Solon, OH 44139
 
Attention: Amy Sanvido , RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EZZ5PI001103
Name of Grantee:  Bird Technologies Group
Equipment Class: Amplifier
Notes: One-Way Signal Booster Amplifier
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22, 90 929.0  -  932.0 0.7   A1A
22, 90 929.0  -  932.0 0.7   A1D
22, 90 929.0  -  932.0 0.7   A2B
22, 90 929.0  -  932.0 0.7   A2D
22, 90 929.0  -  932.0 0.7   F1B
22, 90 929.0  -  932.0 0.7   F1D
22, 90 929.0  -  932.0 0.7   F2B
22, 90 929.0  -  932.0 0.7   F2D
22, 90 929.0  -  932.0 0.7   G1B
22, 90 929.0  -  932.0 0.7   G2B
22, 90 929.0  -  932.0 0.7   G2D
22, 90 929.0  -  932.0 0.7   G3E
22, 90 929.0  -  932.0 0.7   F3E

The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of §1.1307(b)(3).

EAS Grant - Application azEgBwclNgZGxVsNlpuXnw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Bird Technologies Group
30303 Aurora Rd.
Solon, OH 44139
United States 		  Date of Grant: 02/27/2001

Application Dated: 02/27/2001
 
Attention: Amy Sanvido , RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EZZ5PI001103
Name of Grantee:  Bird Technologies Group
Equipment Class: Amplifier
Notes: One-Way Signal Booster Amplifier
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22, 90 929.0  -  932.0 0.7   A1A
22, 90 929.0  -  932.0 0.7   A1D
22, 90 929.0  -  932.0 0.7   A2B
22, 90 929.0  -  932.0 0.7   A2D
22, 90 929.0  -  932.0 0.7   F1B
22, 90 929.0  -  932.0 0.7   F1D
22, 90 929.0  -  932.0 0.7   F2B
22, 90 929.0  -  932.0 0.7   F2D
22, 90 929.0  -  932.0 0.7   G1B
22, 90 929.0  -  932.0 0.7   G2B
22, 90 929.0  -  932.0 0.7   G2D
22, 90 929.0  -  932.0 0.7   G3E
22, 90 929.0  -  932.0 0.7   F3E

The antenna(s) used for this transmitter are to be fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power at each antenna must satisfy the MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co- location requirements of §1.1307(b)(3).



Mail To: