FCC ID EZZ5PI618350

SIGNAL BOOSTER II

by Bird Technologies Group

Grantee Code: EZZ   Product Code: 5PI618350
Latest application date: 2005-10-27

FCC ID Device Details

FCC IDEZZ5PI618350
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeEZZ
Product Code5PI618350
Applicant BusinessBird Technologies Group 🇺🇸
Related Domains bird-technologies.com
Equipment ClassSIGNAL BOOSTER II
Test FirmUltraTech Engineering Labs Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
764-776 MHzOriginal Equipment2005-10-27

Exhibits

DocumentTypeAvailableFile
USERS MANUALUsers Manual2005-10-27PDF 1.9 MB
INTERNAL PHOTOSInternal Photos2005-10-27PDF 3.2 MB
EXTERNAL PHOTOSExternal Photos2005-10-27PDF 678.6 KB
LABEL AND LOCATIONID Label/Location Info2005-10-27PDF 615 KB
TEST REPORTTest Report2005-10-27PDF 1.5 MB
ATTESTATION LETTERAttestation Statements2005-10-27PDF 198.5 KB
CONFIDENTIALITY LETTERCover Letter(s)2005-10-27PDF 48.6 KB
TUNE UP PROCEDUREParts List/Tune Up Info2005-10-27PDF 57.7 KB
BLOCK DIAGRAM Metadata onlyBlock DiagramPDF 92 KB
SCHEMATICS Metadata onlySchematicsPDF 2.9 MB
OPERATIONAL DESCRIPTION Metadata onlyOperational DescriptionPDF 27.6 KB
PARTS LIST Metadata onlyParts List/Tune Up InfoPDF 2.4 MB

Application Information

Application ID5sRb/GI7pEZXTn/Pj00ANQ==
Final Action Date2005-10-27
Application PurposeOriginal Equipment
Applicant FRN0003407350
Model5PI618350
Frequency Range764-776 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionSIGNAL BOOSTER II
Responsible PartyAmy Sanvido, RF Engineer, asanvido@bird-technologies.com , (440) 519-2179
Test FirmTri Luu, UltraTech Engineering Labs Inc., tri@ultratech-labs.com , 877-747-6381
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted per carrier. The antenna(s) used for this transmitter must be fixed-mounted on permanent structures with a separation distance from all persons and maximum antenna gain of 33 cm and 0dBd for indoor operations, and 104 cm and 10 dBd for outdoor. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
5sRb/GI7pEZXTn/Pj00ANQ==2005-10-27Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
764-776 MHz4AmpF1D92
764-776 MHz4AmpF3E9
764-776 MHz4AmpG3E9
794-806 MHz4AmpF1D9
794-806 MHz4AmpF3E9
794-806 MHz4AmpG3E9

Grants

TCB Grant - Application 5sRb/GI7pEZXTn/Pj00ANQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/27/2005

Application Dated: 10/27/2005
Bird Technologies Group
30303 Aurora Rd.
Solon, OH 44139
 
Attention: Amy Sanvido , RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EZZ5PI618350
Name of Grantee:  Bird Technologies Group
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: SIGNAL BOOSTER II
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 90 764.0  -  776.0 4.0  Amp F1D
90 764.0  -  776.0 4.0  Amp F3E
90 764.0  -  776.0 4.0  Amp G3E
90 794.0  -  806.0 4.0  Amp F1D
90 794.0  -  806.0 4.0  Amp F3E
90 794.0  -  806.0 4.0  Amp G3E

Power listed is conducted per carrier. The antenna(s) used for this transmitter must be fixed-mounted on permanent structures with a separation distance from all persons and maximum antenna gain of 33 cm and 0dBd for indoor operations, and 104 cm and 10 dBd for outdoor. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant - Application 5sRb/GI7pEZXTn/Pj00ANQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Bird Technologies Group
30303 Aurora Rd.
Solon, OH 44139
United States
  Date of Grant: 10/27/2005

Application Dated: 10/27/2005
 
Attention: Amy Sanvido , RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  EZZ5PI618350
Name of Grantee:  Bird Technologies Group
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: SIGNAL BOOSTER II
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 90 764.0  -  776.0 4.0  Amp F1D
90 764.0  -  776.0 4.0  Amp F3E
90 764.0  -  776.0 4.0  Amp G3E
90 794.0  -  806.0 4.0  Amp F1D
90 794.0  -  806.0 4.0  Amp F3E
90 794.0  -  806.0 4.0  Amp G3E

Power listed is conducted per carrier. The antenna(s) used for this transmitter must be fixed-mounted on permanent structures with a separation distance from all persons and maximum antenna gain of 33 cm and 0dBd for indoor operations, and 104 cm and 10 dBd for outdoor. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

Mail To: