1. FCC ID
  2. F4A
  3. F4ATHINQ1

FCC ID F4ATHINQ1

ThinQ SDS

by B plus B SmartWorx, Inc.

Grantee Code: F4A   Product Code: THINQ1
Latest application date: 2005-03-16

FCC ID Device Details

FCC IDF4ATHINQ1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeF4A
Product CodeTHINQ1
Applicant BusinessB plus B SmartWorx, Inc. 🇺🇸
Related Domains advantech-bb.com
Equipment ClassThinQ SDS
Test FirmCompatible Electronics

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2005-03-16

Exhibits

DocumentTypeAvailableFile
Revised Users ManualUsers Manual2005-03-16PDF 3.5 MB
Users Manual Metadata onlyUsers Manual2005-03-16PDF 1.9 MB
Internal PhotosInternal Photos2005-03-16PDF 2.2 MB
External PhotosExternal Photos2005-03-16PDF 619.2 KB
FCC Label and LocationID Label/Location Info2005-03-16PDF 3.4 MB
Test Setup PhotosTest Setup Photos2005-03-16PDF 552.5 KB
Test Report BodyTest Report2005-03-16PDF 1.9 MB
Test Report DataTest Report2005-03-16PDF 1.2 MB
Voltage Variation TestTest Report2005-03-16PDF 37.1 KB
Anti Drug Abuse and Authorization LetterAttestation Statements2005-03-16PDF 118.5 KB
Modification LetterAttestation Statements2005-03-16PDF 69.4 KB
Confidentiality LetterCover Letter(s)2005-03-16PDF 90.1 KB
Q and ACover Letter(s)2005-03-16PDF 90.4 KB
MPE CalculationsRF Exposure Info2005-03-16PDF 100.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 121.8 KB
Schematics Metadata onlySchematicsPDF 1.6 MB
Antenna Info Metadata onlyOperational DescriptionPDF 108.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 27.9 KB

Application Information

Application IDdR+U2AtWcNPQRZ6VyurQlw==
Final Action Date2005-03-16
Application PurposeOriginal Equipment
Applicant FRN0007106719
ModelTHINQ1
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionThinQ SDS
Responsible PartyMike McNatt, Compliance Engineer, mmcnatt@advantech-bb.com , 815-433-5100
AgentKyle Kyle Kyle, Compatible Electronics, kyle@celectronics.com , 714-579-0500
Technical ContactKyle Fujimoto, Compatible Electronics, kyle@celectronics.com , 714-579-0500
Test FirmScott McCutchan, Compatible Electronics, 714-579-0500
TCB Emailscott@celectronics.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThis power cord shipped with this device must be supplied with a ferrite attached to the device end. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
dR+U2AtWcNPQRZ6VyurQlw==2005-03-16Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.054828015C

Grants

TCB Grant - Application dR+U2AtWcNPQRZ6VyurQlw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compatible Electronics, Inc.
114 Olinda Drive
Brea, CA 92823
 Date of Grant: 03/16/2005

Application Dated: 03/16/2005
B plus B SmartWorx, Inc.
707 Dayton Rd.
Ottawa, IL 61350
 
Attention: Mike McNatt , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  F4ATHINQ1
Name of Grantee:  B plus B SmartWorx, Inc.
Equipment Class: Digital Transmission System
Notes: ThinQ SDS
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.054828  

This power cord shipped with this device must be supplied with a ferrite attached to the device end.

The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application dR+U2AtWcNPQRZ6VyurQlw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

B plus B SmartWorx, Inc.
707 Dayton Rd.
Ottawa, IL 61350
United States 		  Date of Grant: 03/16/2005

Application Dated: 03/16/2005
 
Attention: Mike McNatt , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  F4ATHINQ1
Name of Grantee:  B plus B SmartWorx, Inc.
Equipment Class: Digital Transmission System
Notes: ThinQ SDS
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.054828  

This power cord shipped with this device must be supplied with a ferrite attached to the device end.

The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: