FCC ID F4AWLNG1
WLRG-RA-DP101
by B plus B SmartWorx, Inc.
Grantee Code: F4A Product Code: WLNG1
Latest application date: 2009-08-27
FCC ID Device Details
| FCC ID | F4AWLNG1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | F4A |
| Product Code | WLNG1 |
| Applicant Business | B plus B SmartWorx, Inc. 🇺🇸 |
| Related Domains |  bb-elec.com |
| Equipment Class | WLRG-RA-DP101 |
| Test Firm | Northwest EMC, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2009-08-27 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2009-01-30 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2008-01-18 |
| 2412-2462 MHz | Original Equipment | 2006-07-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2009-08-27 | PDF 1.4 MB |
| User Manual | Users Manual | 2009-01-30 | PDF 650.9 KB |
| Users Manual | Users Manual | 2006-07-17 | PDF 306.5 KB |
| Internal Photos | Internal Photos | 2009-08-27 | PDF 448.3 KB |
| Internal Photos | Internal Photos | 2008-01-18 | PDF 322.8 KB |
| Internal Photos | Internal Photos | 2006-07-17 | PDF 694.4 KB |
| External Photos | External Photos | 2009-08-27 | PDF 364.1 KB |
| External Photos | External Photos | 2008-01-18 | PDF 119.8 KB |
| External Photos | External Photos | 2006-07-17 | PDF 1.3 MB |
| ID Label | ID Label/Location Info | 2009-08-27 | PDF 96.6 KB |
| FCC Label for Host | ID Label/Location Info | 2006-07-17 | PDF 14.5 KB |
| FCC Label for Module | ID Label/Location Info | 2006-07-17 | PDF 214.1 KB |
| Antenna Info | Operational Description | 2009-08-27 | PDF 390.3 KB |
| Antenna Info Omni | Operational Description | 2009-01-30 | PDF 426.7 KB |
| Antenna Info PCB Trace | Operational Description | 2009-01-30 | PDF 419.6 KB |
| Approved Antenna Data Sheets | Operational Description | 2006-07-17 | PDF 204.1 KB |
| Operational Description | Operational Description | 2006-07-17 | PDF 186.2 KB |
| Test Setup Photos | Test Setup Photos | 2009-08-27 | PDF 222 KB |
| Test Setup Photos | Test Report | 2009-01-30 | PDF 328.3 KB |
| Test Setup Photos | Test Setup Photos | 2008-01-18 | PDF 620.8 KB |
| Test Setup Photos | Test Setup Photos | 2006-07-17 | PDF 1.9 MB |
| Test Report | Test Report | 2009-08-27 | PDF 606.1 KB |
| Test Report | Test Report | 2009-01-30 | PDF 775.5 KB |
| Test Report | Test Report | 2008-01-18 | PDF 125.4 KB |
| Test Report Body | Test Report | 2006-07-17 | PDF 1.8 MB |
| Test Report Data | Test Report | 2006-07-17 | PDF 1.9 MB |
| Voltage Variation Test | Test Report | 2006-07-17 | PDF 40.2 KB |
| Attestation regarding Output Power | Attestation Statements | 2009-01-30 | PDF 257.8 KB |
| Anti Drug Abuse and Authorization Letter | Attestation Statements | 2006-07-17 | PDF 17.7 KB |
| Modular Approval Justifications | Attestation Statements | 2006-07-17 | PDF 110.6 KB |
| Compliance Opinion | Cover Letter(s) | 2009-08-27 | PDF 15.6 KB |
| Cover letter | Cover Letter(s) | 2009-08-27 | PDF 68 KB |
| LMA letter | Cover Letter(s) | 2009-08-27 | PDF 681.8 KB |
| Compliance Opinion | Cover Letter(s) | 2009-01-30 | PDF 26 KB |
| Cover letter | Cover Letter(s) | 2009-01-30 | PDF 53.4 KB |
| PC2C Request Letter | Cover Letter(s) | 2008-01-18 | PDF 38.4 KB |
| CETCB Comments | Cover Letter(s) | 2006-07-17 | PDF 12.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2006-07-17 | PDF 21.6 KB |
| MPE Estimates | RF Exposure Info | 2009-08-27 | PDF 704 KB |
| RF Exposure Antenex | RF Exposure Info | 2009-01-30 | PDF 9.4 KB |
| RF Exposure Laird | RF Exposure Info | 2009-01-30 | PDF 9.4 KB |
| MPE Calculations | RF Exposure Info | 2006-07-17 | PDF 267.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 18 KB | |
| Schematics Metadata only | Schematics | PDF 357.8 KB |
Application Information
| Application ID | bfJhnv2Q0/8LG8RWyMkCWg== |
|---|---|
| Final Action Date | 2009-08-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007106719 |
| Model | WLNG1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WLRG-RA-DP101 |
| Responsible Party | Paul Harrington, pharrington@bb-elec.com , 8154348784 |
| Test Firm | Greg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com  , 503-844-4066 |
| TCB Email | dtolman@nwemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. Additional antennas have been evaluated and approved as listed in this and previous filings. This filing is for the limited modular approval of the device while used in the Hewlett Packard Model Handheld sp400f All in One Scanner. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| bfJhnv2Q0/8LG8RWyMkCWg== | 2009-08-27 | Class II permissive change or modification of presently authorized equipment |
| U8dtnqUqyua5/7wfroIQRw== | 2009-01-30 | Class II permissive change or modification of presently authorized equipment |
| QDbhELuZi9y2pSnNLtzOFg== | 2008-01-18 | Class II permissive change or modification of presently authorized equipment |
| ilONFoasaOzoQaFRHWO/zQ== | 2006-07-17 | Original Equipment |
Grants
TCB Grant - Application U8dtnqUqyua5/7wfroIQRw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 01/30/2009 Application Dated: 01/30/2009 |
| B&B Electronics |
| 707 E. Dayton Road |
| Ottawa, IL 61350 |
| Attention: Paul Harrington |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | F4AWLNG1 |
| Name of Grantee: | B&B Electronics |
| Equipment Class: | Digital Transmission System |
| Notes: | WLRG-RA-DP101 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.142889 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. Additional antennas have been evaluated and approved as listed in this filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application U8dtnqUqyua5/7wfroIQRw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
B&B Electronics 707 E. Dayton Road Ottawa, IL 61350 United States |
Date of Grant: 01/30/2009 Application Dated: 01/30/2009 |
| Attention: Paul Harrington |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | F4AWLNG1 |
| Name of Grantee: | B&B Electronics |
| Equipment Class: | Digital Transmission System |
| Notes: | WLRG-RA-DP101 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.142889 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. Additional antennas have been evaluated and approved as listed in this filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/18/2008 Application Dated: 01/18/2008 |
| B&B Electronics |
| 707 E. Dayton Road |
| Ottawa, IL 61350 |
| Attention: Paul Harrington |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | F4AWLNG1 |
| Name of Grantee: | B&B Electronics |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.085 |
| The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application QDbhELuZi9y2pSnNLtzOFg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
B&B Electronics 707 E. Dayton Road Ottawa, IL 61350 United States |
Date of Grant: 01/18/2008 Application Dated: 01/18/2008 |
| Attention: Paul Harrington |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | F4AWLNG1 |
| Name of Grantee: | B&B Electronics |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.085 |
| The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Compatible Electronics, Inc. 114 Olinda Drive Brea, CA 92823 |
Date of Grant: 07/17/2006 Application Dated: 07/17/2006 |
| B plus B SmartWorx, Inc. |
| 707 Dayton Rd. |
| Ottawa, IL 61350 |
| Attention: Mike McNatt , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | F4AWLNG1 |
| Name of Grantee: | B plus B SmartWorx, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.142889 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application ilONFoasaOzoQaFRHWO/zQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
B plus B SmartWorx, Inc. 707 Dayton Rd. Ottawa, IL 61350 United States |
Date of Grant: 07/17/2006 Application Dated: 07/17/2006 |
| Attention: Mike McNatt , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | F4AWLNG1 |
| Name of Grantee: | B plus B SmartWorx, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.142889 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 08/27/2009 Application Dated: 08/27/2009 |
| B&B Electronics |
| 707 E. Dayton Road |
| Ottawa, IL 61350 |
| Attention: Paul Harrington |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | F4AWLNG1 |
| Name of Grantee: | B&B Electronics |
| Equipment Class: | Digital Transmission System |
| Notes: | WLRG-RA-DP101 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.142889 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. Additional antennas have been evaluated and approved as listed in this and previous filings. This filing is for the limited modular approval of the device while used in the Hewlett Packard Model Handheld sp400f All in One Scanner. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application bfJhnv2Q0/8LG8RWyMkCWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
B&B Electronics 707 E. Dayton Road Ottawa, IL 61350 United States |
Date of Grant: 08/27/2009 Application Dated: 08/27/2009 |
| Attention: Paul Harrington |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | F4AWLNG1 |
| Name of Grantee: | B&B Electronics |
| Equipment Class: | Digital Transmission System |
| Notes: | WLRG-RA-DP101 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.142889 |
| Modular Approval. Power output is conducted. This device may only be used with the antennas listed within the certification application at the time of the original filing. Additional antennas have been evaluated and approved as listed in this and previous filings. This filing is for the limited modular approval of the device while used in the Hewlett Packard Model Handheld sp400f All in One Scanner. The antenna used with this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |