FCC ID F53143G4000

Cellular alarm communicator

by Tyco Safety Products Canada Ltd.

Grantee Code: F53   Product Code: 143G4000
Latest application date: 2014-09-05

FCC ID Device Details

FCC IDF53143G4000
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeF53
Product Code143G4000
Applicant BusinessTyco Safety Products Canada Ltd. 🇨🇦
Related Domains tycoint.com
Equipment ClassCellular alarm communicator
Test FirmDEKRA Testing and Certification, S.A.U.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzOriginal Equipment2014-09-05

Exhibits

DocumentTypeAvailableFile
Installation manualUsers Manual2015-03-04PDF 1.1 MB
Internal photosInternal Photos2015-03-04PDF 1.9 MB
Module photosInternal Photos2015-03-04PDF 134.9 KB
External photosExternal Photos2015-03-04PDF 2.1 MB
Label and location1ID Label/Location Info2014-09-05PDF 293.6 KB
Label and location2ID Label/Location Info2014-09-05PDF 294.3 KB
Module test setup photosTest Setup Photos2015-03-04PDF 124.6 KB
Test setup photosTest Setup Photos2015-03-04PDF 867.9 KB
Module reportTest Report2014-09-05PDF 1 MB
Part1Test Report2014-09-05PDF 3.4 MB
Part2Test Report2014-09-05PDF 3.9 MB
Part3Test Report2014-09-05PDF 3.4 MB
Part4Test Report2014-09-05PDF 4 MB
Test reportTest Report2014-09-05PDF 4.1 MB
Module attestationAttestation Statements2014-09-05PDF 63.8 KB
Agent letterCover Letter(s)2014-09-05PDF 38.3 KB
Application letterCover Letter(s)2014-09-05PDF 22.2 KB
ConfidentialityCover Letter(s)2014-09-05PDF 28.7 KB
Confidentiality letterCover Letter(s)2014-09-05PDF 28.7 KB
Module authorisationCover Letter(s)2014-09-05PDF 149.2 KB
ST confidentialityCover Letter(s)2014-09-05PDF 27.1 KB
STC confidentiality letterCover Letter(s)2014-09-05PDF 27.1 KB
module authorisationCover Letter(s)2014-09-05PDF 149.2 KB
Exposure reportRF Exposure Info2014-09-05PDF 35.8 KB
Block diagram Metadata onlyBlock DiagramPDF 262.1 KB
Module Block diagrams Metadata onlyBlock DiagramPDF 1.1 MB
Module schematic Metadata onlySchematicsPDF 1.9 MB
Schematic Metadata onlySchematicsPDF 1.7 MB
Antenna spec1 Metadata onlyOperational DescriptionPDF 311.2 KB
Antenna spec2 Metadata onlyOperational DescriptionPDF 73.1 KB
Operational desciption Metadata onlyOperational DescriptionPDF 262.1 KB
Main Bom Metadata onlyParts List/Tune Up InfoPDF 62.1 KB
Module BoM Metadata onlyParts List/Tune Up InfoPDF 66.1 KB
Tuneup statement Metadata onlyParts List/Tune Up InfoPDF 315.5 KB

Application Information

Application IDi0xW3WpNjPKPzWacaWMeEw==
Final Action Date2014-09-05
Application PurposeOriginal Equipment
Applicant FRN0006834485
Model143G4000
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionCellular alarm communicator
Responsible PartyDan Nita, Approvals Manager, dnita@tycoint.com , 1-647-480-0430
Technical ContactSabina Ruiz, AT4 wireless, S.A, srcastillo@at4wireless.com , +34952619856
Test FirmRafael Lopez Martin, DEKRA Testing and Certification, S.A.U., rafael.lopez@dekra.com , 34-9562-61 91 00
TCB EmailTom.Twynam@btinternet.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/04/2015
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Maximum antenna gain to meet RF exposure requirements for 850 MHz band is 9.64 dBi and for 1900 MHz band 5.06 dBi.

Applications

Application IDDatePurpose
i0xW3WpNjPKPzWacaWMeEw==2014-09-05Original Equipment
7RU3x/sNRqWvnV20zPFNmA==2014-09-05Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz1.242Hz240KGXW22H
824.2-848.8 MHz0.62377Hz242KG7W22H
826.4-846.6 MHz0.37213Hz4M95F9W22H
826.4-846.6 MHz0.27155Hz4M10F9W22H
1850.2-1909.8 MHz0.133142Hz241KGXW24E
1850.2-1909.8 MHz0.0927Hz248KG7W24E
1852.4-1907.6 MHz0.15657Hz4M10F9W24E
1852.4-1907.6 MHz0.1155Hz4M10F9W24E

Grants

TCB Grant - Application i0xW3WpNjPKPzWacaWMeEw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 09/05/2014

Application Dated: 09/05/2014
Tyco Safety Products Canada Ltd.
3301 Langstaff Road
Concord, Ontario, L4K 4L2
Canada
 
Attention: Dan Nita , Approvals Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  F53143G4000
Name of Grantee:  Tyco Safety Products Canada Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: Cellular alarm communicator
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.2 42.0  Hz 240KGXW
22H 824.2  -  848.8 0.623 77.0  Hz 242KG7W
22H 826.4  -  846.6 0.372 13.0  Hz 4M95F9W
22H 826.4  -  846.6 0.27 155.0  Hz 4M10F9W
24E 1850.2  -  1909.8 0.133 142.0  Hz 241KGXW
24E 1850.2  -  1909.8 0.09 27.0  Hz 248KG7W
24E 1852.4  -  1907.6 0.156 57.0  Hz 4M10F9W
24E 1852.4  -  1907.6 0.11 55.0  Hz 4M10F9W

Power output listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Maximum antenna gain to meet RF exposure requirements for 850 MHz band is 9.64 dBi and for 1900 MHz band 5.06 dBi.


EAS Grant - Application i0xW3WpNjPKPzWacaWMeEw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Tyco Safety Products Canada Ltd.
3301 Langstaff Road
Concord, Ontario, L4K 4L2
Canada
  Date of Grant: 09/05/2014

Application Dated: 09/05/2014
 
Attention: Dan Nita , Approvals Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  F53143G4000
Name of Grantee:  Tyco Safety Products Canada Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: Cellular alarm communicator
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.2 42.0  Hz 240KGXW
22H 824.2  -  848.8 0.623 77.0  Hz 242KG7W
22H 826.4  -  846.6 0.372 13.0  Hz 4M95F9W
22H 826.4  -  846.6 0.27 155.0  Hz 4M10F9W
24E 1850.2  -  1909.8 0.133 142.0  Hz 241KGXW
24E 1850.2  -  1909.8 0.09 27.0  Hz 248KG7W
24E 1852.4  -  1907.6 0.156 57.0  Hz 4M10F9W
24E 1852.4  -  1907.6 0.11 55.0  Hz 4M10F9W

Power output listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Maximum antenna gain to meet RF exposure requirements for 850 MHz band is 9.64 dBi and for 1900 MHz band 5.06 dBi.



TCB Grant - Application 7RU3x/sNRqWvnV20zPFNmA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD BABT
Octagon House, Concorde Way, Segensworth North,
Fareham, PO15 5RL
United Kingdom
Date of Grant: 09/05/2014

Application Dated: 09/05/2014
Tyco Safety Products Canada Ltd.
3301 Langstaff Road
Concord, Ontario, L4K 4L2
Canada
 
Attention: Dan Nita , Approvals Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  F53143G4000
Name of Grantee:  Tyco Safety Products Canada Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Cellular alarm communicator
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application 7RU3x/sNRqWvnV20zPFNmA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Tyco Safety Products Canada Ltd.
3301 Langstaff Road
Concord, Ontario, L4K 4L2
Canada
  Date of Grant: 09/05/2014

Application Dated: 09/05/2014
 
Attention: Dan Nita , Approvals Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  F53143G4000
Name of Grantee:  Tyco Safety Products Canada Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Cellular alarm communicator
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



Mail To: