FCC ID F5318PG9309
Magnetic Contact
by Tyco Safety Products Canada Ltd.
Grantee Code: F53 Product Code: 18PG9309
Latest application date: 2022-06-02
FCC ID Device Details
| FCC ID | F5318PG9309 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | F53 |
| Product Code | 18PG9309 |
| Applicant Business | Tyco Safety Products Canada Ltd. 🇨🇦 |
| Related Domains |  tycoint.com |
| Equipment Class | Magnetic Contact |
| Test Firm | Hermon Laboratories Ltd. |
Linked Records
Barcode records decoded from published FCC label exhibits or linked by an explicit FCC ID reference on a product page.
| UPC / GTIN | Linked product |
|---|---|
| 5202219052022 EAN-13 · GTIN-14 05202219052022 | Magnetic Contact MC309PG2 Brand: Visonic Ltd. · Model: MC309PG2 Source: FCC label |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 912.75-919.106 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-02 |
| 912.75-919.106 MHz | Change in identification of presently authorized equipment. Original FCC ID: WP3MC309PG2 Grant Date: 11/12/2018 | 2018-11-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2022-06-02 | PDF 148.1 KB |
| Users Manual_reduced | Users Manual | 2022-06-02 | PDF 611.4 KB |
| User_manual | Users Manual | 2018-11-26 | PDF 2.6 MB |
| Internal Photos | Internal Photos | 2022-11-29 | PDF 190.7 KB |
| External Photos | External Photos | 2022-06-02 | PDF 70.3 KB |
| External Photos | External Photos | 2018-11-26 | PDF 80.7 KB |
| ID Label/Location Info | ID Label/Location Info | 2022-06-02 | PDF 76.5 KB |
| ID Label/Location Info | ID Label/Location Info | 2018-11-26 | PDF 137.9 KB |
| Test Setup Photos | Test Setup Photos | 2022-06-02 | PDF 301.2 KB |
| Test Report | Test Report | 2022-06-02 | PDF 908.8 KB |
| Class II permissive change letter | Cover Letter(s) | 2022-06-02 | PDF 17.4 KB |
| Confidentiality | Cover Letter(s) | 2022-06-02 | PDF 63.8 KB |
| Cover letter | Cover Letter(s) | 2022-06-02 | PDF 95.3 KB |
| Declaration of authorization | Cover Letter(s) | 2022-06-02 | PDF 121.1 KB |
| Original applicant authorization for modification Letter | Cover Letter(s) | 2022-06-02 | PDF 36.4 KB |
| Cover_letter_31270 | Cover Letter(s) | 2018-11-26 | PDF 190.1 KB |
| Declaration_of_authorization | Cover Letter(s) | 2018-11-26 | PDF 199.1 KB |
| Original_grantee_ permission_letter | Cover Letter(s) | 2018-11-26 | PDF 123.7 KB |
| RF Exposure Info | RF Exposure Info | 2022-06-02 | PDF 69.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 376.7 KB | |
| Schematics Metadata only | Schematics | PDF 157.7 KB | |
| Operational Description Metadata only | Operational Description | PDF 574.6 KB |
Application Information
| Application ID | ACbqG1gLgH30xJ+FDZ0v6A== |
|---|---|
| Final Action Date | 2022-06-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006834485 |
| Model | 18PG9309 |
| Frequency Range | 912.75-919.106 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Magnetic Contact |
| Responsible Party | Dan Nita, Approvals Manager, dnita@tycoint.com , 1-647-480-0430 |
| Technical Contact | Michael Nikishin, Hermon Laboratories Ltd., nikishin@hermonlabs.com  , +97246268440 |
| Non-Technical Contact | Dan Nita, Tyco Safety Products Canada Ltd., dnita@tycoint.com , 1-647-480-0430 |
| Test Firm | George Shleimovich, Hermon Laboratories Ltd., George@HERMONLABS.com , 97246268468 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 11/29/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC: Change LED location, Using 2 outputs instead of 3, New plastic, New SW, Add Flash Memory. Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ACbqG1gLgH30xJ+FDZ0v6A== | 2022-06-02 | Class II permissive change or modification of presently authorized equipment |
| +VGtEB4owcWR6demJigUpg== | 2018-11-26 | Change in identification of presently authorized equipment. Original FCC ID: WP3MC309PG2 Grant Date: 11/12/2018 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 912.75-919.106 MHz | 0.0270000 | 15C |
Grants
TCB Grant - Application ACbqG1gLgH30xJ+FDZ0v6A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 06/02/2022 Application Dated: 06/01/2022 |
| Tyco Safety Products Canada Ltd. |
| 3301 Langstaff Road |
| Concord, Ontario, L4K 4L2 Canada |
| Attention: Dan Nita , Approvals Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | F5318PG9309 |
| Name of Grantee: | Tyco Safety Products Canada Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Magnetic Contact |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 912.75 - 919.106 | 0.027 |
| C2PC: Change LED location, Using 2 outputs instead of 3, New plastic, New SW, Add Flash Memory. Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. |
EAS Grant - Application ACbqG1gLgH30xJ+FDZ0v6A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tyco Safety Products Canada Ltd. 3301 Langstaff Road Concord, Ontario, L4K 4L2 Canada |
Date of Grant: 06/02/2022 Application Dated: 06/01/2022 |
| Attention: Dan Nita , Approvals Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | F5318PG9309 |
| Name of Grantee: | Tyco Safety Products Canada Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Magnetic Contact |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 912.75 - 919.106 | 0.027 |
| C2PC: Change LED location, Using 2 outputs instead of 3, New plastic, New SW, Add Flash Memory. Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 11/26/2018 Application Dated: 11/26/2018 |
| Tyco Safety Products Canada Ltd. |
| 3301 Langstaff Road |
| Concord, Ontario, L4K 4L2 Canada |
| Attention: Dan Nita , Approvals Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | F5318PG9309 |
| Name of Grantee: | Tyco Safety Products Canada Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Magnetic Contact |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 912.75 - 919.106 | 0.027 |
| Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. |
EAS Grant - Application +VGtEB4owcWR6demJigUpg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tyco Safety Products Canada Ltd. 3301 Langstaff Road Concord, Ontario, L4K 4L2 Canada |
Date of Grant: 11/26/2018 Application Dated: 11/26/2018 |
| Attention: Dan Nita , Approvals Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | F5318PG9309 |
| Name of Grantee: | Tyco Safety Products Canada Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Magnetic Contact |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 912.75 - 919.106 | 0.027 |
| Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. |
| Mail To: |