FCC ID F8I-DVLRCSSMR

Digivance Long Range Coverage Solution SMR System

by ADC Telecommunications Inc

Grantee Code: F8I   Product Code: DVLRCSSMR
Latest application date: 2002-06-07

FCC ID Device Details

FCC IDF8I-DVLRCSSMR
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeF8I
Product CodeDVLRCSSMR
Applicant BusinessADC Telecommunications Inc 🇺🇸
Related Domains commscope.com
Equipment ClassDigivance Long Range Coverage Solution SMR System
Test FirmTUV SUD America - Product Service

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
851-866 MHzClass II permissive change or modification of presently authorized equipment2002-06-07
851-866 MHzOriginal Equipment2001-09-21

Exhibits

DocumentTypeAvailableFile
Part 1 new manualUsers Manual2002-06-07PDF 2.6 MB
Part 2 new manualUsers Manual2002-06-07PDF 2.6 MB
Part 3 new manualUsers Manual2002-06-07PDF 2.4 MB
Part 4 new manualUsers Manual2002-06-07PDF 2.8 MB
Part 5 new manualUsers Manual2002-06-07PDF 2.1 MB
manualUsers Manual2001-09-21PDF 2.8 MB
internal photosInternal Photos2001-09-21PDF 3.8 MB
duplexer photos in and outExternal Photos2002-06-07PDF 1.7 MB
external photos1External Photos2001-09-21PDF 1.9 MB
external photos2External Photos2001-09-21PDF 2.6 MB
label content locationID Label/Location Info2001-09-21PDF 361.7 KB
test setupsTest Setup Photos2001-09-21PDF 31.3 KB
conducted emissions dataTest Report2002-06-07PDF 632.1 KB
new reportTest Report2002-06-07PDF 359.7 KB
test reportTest Report2001-09-21PDF 2.5 MB
attestationAttestation Statements2001-09-21PDF 28.3 KB
description of changesCover Letter(s)2002-06-07PDF 5.7 KB
drawing of antenna setupCover Letter(s)2002-06-07PDF 6.1 KB
sar letterRF Exposure Info2002-06-07PDF 36.2 KB
agent confidentialityCover Letter(s)2001-09-21PDF 71.4 KB
rf exposureRF Exposure Info2001-09-21PDF 32.5 KB
block diagram Metadata onlyBlock DiagramPDF 10.8 KB
new block diagram Metadata onlyBlock DiagramPDF 47.5 KB
SCHEMATICS Metadata onlySchematicsPDF 1.2 MB
operating description Metadata onlyOperational DescriptionPDF 7.3 KB
theory of operation Metadata onlyOperational DescriptionPDF 52.7 KB
duplexer bom Metadata onlyParts List/Tune Up InfoPDF 33.4 KB
parts list tuneup Metadata onlyParts List/Tune Up InfoPDF 176.6 KB

Application Information

Application IDVErQE6YAAS53J/M1+TjxCQ==
Final Action Date2002-06-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008274896
ModelDVLRCSSMR
Frequency Range851-866 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionDigivance Long Range Coverage Solution SMR System
Responsible PartyJoshua Wittman, Compliance Engineer, Joshua.Wittman@commscope.com , 952-403-8322
AgentJoel Joel Joel, TUV Product Service, jschneider@tuvam.com , 651 583 3322
Test FirmJoel Schneider, TUV SUD America - Product Service, jschneider@tuvam.com , 651-604-4582
TCB Emailjevans@tuvam.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOriginal grant issued 09/21/2001. 1000 W EIRP composite output. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 30 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
VErQE6YAAS53J/M1+TjxCQ==2002-06-07Class II permissive change or modification of presently authorized equipment
6Uh/6W9ZmOTXpp6cRVv/iA==2001-09-21Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
851-866 MHz30.11.5ppmF9W9
851-866 MHz30.11.5ppmDXW9
851-866 MHz30.11.5ppmFXW9

Grants

TCB Grant - Application VErQE6YAAS53J/M1+TjxCQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV America, Inc.
10040 Mesa Rim Road
San Diego, CA 92121
Date of Grant: 06/07/2002

Application Dated: 06/07/2002
ADC Telecommunications Inc
501 Shenandoah Drive
Shakopee, MN 55379
 
Attention: Joshua Wittman , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  F8I-DVLRCSSMR
Name of Grantee:  ADC Telecommunications Inc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Digivance Long Range Coverage Solution SMR System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 851.0  -  866.0 30.1 1.5  PM F9W
90 851.0  -  866.0 30.1 1.5  PM DXW
90 851.0  -  866.0 30.1 1.5  PM FXW

Original grant issued 09/21/2001. 1000 W EIRP composite output. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 30 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure compliance.

EAS Grant - Application VErQE6YAAS53J/M1+TjxCQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ADC Telecommunications Inc
501 Shenandoah Drive
Shakopee, MN 55379
United States
  Date of Grant: 06/07/2002

Application Dated: 06/07/2002
 
Attention: Joshua Wittman , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  F8I-DVLRCSSMR
Name of Grantee:  ADC Telecommunications Inc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Digivance Long Range Coverage Solution SMR System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 851.0  -  866.0 30.1 1.5  PM F9W
90 851.0  -  866.0 30.1 1.5  PM DXW
90 851.0  -  866.0 30.1 1.5  PM FXW

Original grant issued 09/21/2001. 1000 W EIRP composite output. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 30 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure compliance.



TCB Grant - Application 6Uh/6W9ZmOTXpp6cRVv/iA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV America, Inc.
10040 Mesa Rim Road
San Diego, CA 92121
Date of Grant: 09/21/2001

Application Dated: 09/21/2001
ADC Telecommunications Inc
501 Shenandoah Drive
Shakopee, MN 55379
 
Attention: Joshua Wittman , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  F8I-DVLRCSSMR
Name of Grantee:  ADC Telecommunications Inc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Digivance Long Range Coverage Solution SMR System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 851.0  -  866.0 30.1 1.5  PM F9W
90 851.0  -  866.0 30.1 1.5  PM DXW
90 851.0  -  866.0 30.1 1.5  PM FXW

1000 W EIRP composite output. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 30 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure compliance.

EAS Grant - Application 6Uh/6W9ZmOTXpp6cRVv/iA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ADC Telecommunications Inc
501 Shenandoah Drive
Shakopee, MN 55379
United States
  Date of Grant: 09/21/2001

Application Dated: 09/21/2001
 
Attention: Joshua Wittman , Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  F8I-DVLRCSSMR
Name of Grantee:  ADC Telecommunications Inc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Digivance Long Range Coverage Solution SMR System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 851.0  -  866.0 30.1 1.5  PM F9W
90 851.0  -  866.0 30.1 1.5  PM DXW
90 851.0  -  866.0 30.1 1.5  PM FXW

1000 W EIRP composite output. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 30 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure compliance.



Mail To: