FCC ID FC3CR2TX2AD

Microwave Transmitter

by Microwave Radio Communications LLC

Grantee Code: FC3   Product Code: CR2TX2AD
Latest application date: 2005-08-01

FCC ID Device Details

FCC IDFC3CR2TX2AD
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeFC3
Product CodeCR2TX2AD
Applicant BusinessMicrowave Radio Communications LLC 🇺🇸
Related Domains vislink.com
Equipment ClassMicrowave Transmitter

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
1990-2483.5 MHzOriginal Equipment2005-08-01

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2005-08-01PDF 687.8 KB
Internal PhotosInternal Photos2005-08-01PDF 955.6 KB
External PhotosExternal Photos2005-08-01PDF 717.5 KB
LabelID Label/Location Info2005-08-01PDF 352.8 KB
Block DiagramBlock Diagram2005-08-01PDF 43.6 KB
Amplifier Power BudgetOperational Description2005-08-01PDF 19.3 KB
Operational DescriptionOperational Description2005-08-01PDF 110.8 KB
Test Setup PhotosTest Setup Photos2005-08-01PDF 1.2 MB
Test DataTest Report2005-08-01PDF 66.1 KB
Test Report Part 1Test Report2005-08-01PDF 3.7 MB
Test Report Part 2Test Report2005-08-01PDF 3.7 MB
Confidentiality RequestCover Letter(s)2005-08-01PDF 184.9 KB
Response to Inquiry to FCCCover Letter(s)2005-08-01PDF 92.5 KB
RF Exposure InformationRF Exposure Info2005-08-01PDF 462.2 KB
Schematics and Layout Diagrams Metadata onlySchematicsPDF 1.3 MB
Bill of Materials Metadata onlyParts List/Tune Up InfoPDF 465.7 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 390.8 KB

Application Information

Application IDY2mrtcR7ZGeuPUb0mNi1zw==
Final Action Date2005-08-01
Application PurposeOriginal Equipment
Applicant FRN0004267712
ModelCR2TX2AD
Frequency Range1990-2483.5 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionMicrowave Transmitter
Responsible PartyRichard Miller, Lead Solutions Engineer, richard.miller@vislink.com , 9783309284
TCB Emailcertification@curtis-straus.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe antenna(s) used for this transmitter must be installed outside vehicles on a mast to provide a separation distance of at least 2 meters from all persons while operating and must not be co-located or operating in conjunction with any other antenna or transmitter. The installation and operating configurations of this transmitter, including the antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing for antennas with more than 16dBi gain. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Y2mrtcR7ZGeuPUb0mNi1zw==2005-08-01Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
1990-2483.5 MHz52ppm17M0W7D74
1990-2483.5 MHz52ppm16M0W7D74
1990-2483.5 MHz52ppm12M0W7D74
1990-2483.5 MHz52ppm17M0W7D9
1990-2483.5 MHz52ppm16M0W7D9
1990-2483.5 MHz52ppm12M0W7D9
1990-2483.5 MHz122ppm16M0F8W74
1990-2483.5 MHz122ppm12M0F8W74
1990-2483.5 MHz122ppm17M0W7D74
1990-2483.5 MHz122ppm16M0W7D74
1990-2483.5 MHz122ppm12M0W7D74
1990-2483.5 MHz52ppm17M0F8W74
1990-2483.5 MHz52ppm16M0F8W74
1990-2483.5 MHz52ppm12M0F8W74

Grants

TCB Grant - Application Y2mrtcR7ZGeuPUb0mNi1zw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 08/01/2005

Application Dated: 08/01/2005
Microwave Radio Communications LLC
101 Billerica Avenue, Bldg. 6
N. Billerica, MA 01862-1256
 
Attention: Richard Miller , Lead Solutions Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FC3CR2TX2AD
Name of Grantee:  Microwave Radio Communications LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Microwave Transmitter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
74 1990.0  -  2483.5 12.0 2.0  PM 17M0F8W
74 1990.0  -  2483.5 12.0 2.0  PM 16M0F8W
74 1990.0  -  2483.5 12.0 2.0  PM 12M0F8W
74 1990.0  -  2483.5 12.0 2.0  PM 17M0W7D
74 1990.0  -  2483.5 12.0 2.0  PM 16M0W7D
74 1990.0  -  2483.5 12.0 2.0  PM 12M0W7D
74 1990.0  -  2483.5 5.0 2.0  PM 17M0F8W
74 1990.0  -  2483.5 5.0 2.0  PM 16M0F8W
74 1990.0  -  2483.5 5.0 2.0  PM 12M0F8W
74 1990.0  -  2483.5 5.0 2.0  PM 17M0W7D
74 1990.0  -  2483.5 5.0 2.0  PM 16M0W7D
74 1990.0  -  2483.5 5.0 2.0  PM 12M0W7D
90 1990.0  -  2483.5 5.0 2.0  PM 17M0W7D
90 1990.0  -  2483.5 5.0 2.0  PM 16M0W7D
90 1990.0  -  2483.5 5.0 2.0  PM 12M0W7D

The antenna(s) used for this transmitter must be installed outside vehicles on a mast to provide a separation distance of at least 2 meters from all persons while operating and must not be co-located or operating in conjunction with any other antenna or transmitter. The installation and operating configurations of this transmitter, including the antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing for antennas with more than 16dBi gain. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application Y2mrtcR7ZGeuPUb0mNi1zw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Microwave Radio Communications LLC
101 Billerica Avenue, Bldg. 6
N. Billerica, MA 01862-1256
United States
  Date of Grant: 08/01/2005

Application Dated: 08/01/2005
 
Attention: Richard Miller , Lead Solutions Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FC3CR2TX2AD
Name of Grantee:  Microwave Radio Communications LLC
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Microwave Transmitter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
74 1990.0  -  2483.5 12.0 2.0  PM 17M0F8W
74 1990.0  -  2483.5 12.0 2.0  PM 16M0F8W
74 1990.0  -  2483.5 12.0 2.0  PM 12M0F8W
74 1990.0  -  2483.5 12.0 2.0  PM 17M0W7D
74 1990.0  -  2483.5 12.0 2.0  PM 16M0W7D
74 1990.0  -  2483.5 12.0 2.0  PM 12M0W7D
74 1990.0  -  2483.5 5.0 2.0  PM 17M0F8W
74 1990.0  -  2483.5 5.0 2.0  PM 16M0F8W
74 1990.0  -  2483.5 5.0 2.0  PM 12M0F8W
74 1990.0  -  2483.5 5.0 2.0  PM 17M0W7D
74 1990.0  -  2483.5 5.0 2.0  PM 16M0W7D
74 1990.0  -  2483.5 5.0 2.0  PM 12M0W7D
90 1990.0  -  2483.5 5.0 2.0  PM 17M0W7D
90 1990.0  -  2483.5 5.0 2.0  PM 16M0W7D
90 1990.0  -  2483.5 5.0 2.0  PM 12M0W7D

The antenna(s) used for this transmitter must be installed outside vehicles on a mast to provide a separation distance of at least 2 meters from all persons while operating and must not be co-located or operating in conjunction with any other antenna or transmitter. The installation and operating configurations of this transmitter, including the antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of §2.1091. RF exposure compliance may need to be addressed at the time of licensing for antennas with more than 16dBi gain. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: