FCC ID FC3PTX270AD
PTX-PRO Transmitter
by Microwave Radio Communications LLC
Grantee Code: FC3 Product Code: PTX270AD
Latest application date: 2011-08-04
FCC ID Device Details
| FCC ID | FC3PTX270AD |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | FC3 |
| Product Code | PTX270AD |
| Applicant Business | Microwave Radio Communications LLC 🇺🇸 |
| Related Domains |  vislink.com |
| Equipment Class | PTX-PRO Transmitter |
| Test Firm | Curtis-Straus LLC. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2031.5-2103.5 MHz | Original Equipment | 2011-08-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2011-08-04 | PDF 1.4 MB |
| Internal Photos | Internal Photos | 2011-08-04 | PDF 3.4 MB |
| External Photos | External Photos | 2011-08-04 | PDF 2.8 MB |
| Label and Location | ID Label/Location Info | 2011-08-04 | PDF 120.4 KB |
| Test Setup Photos | Test Setup Photos | 2011-08-04 | PDF 4.7 MB |
| Test Report | Test Report | 2011-08-04 | PDF 486.7 KB |
| Confidentiality Request | Cover Letter(s) | 2011-08-04 | PDF 142.7 KB |
| Cover Letter - Agent Authorization | Cover Letter(s) | 2011-08-04 | PDF 287.7 KB |
| RF Exposure Info | RF Exposure Info | 2011-08-04 | PDF 1.4 MB |
Application Information
| Application ID | 16kjEpkpbsy+ojZPvjLV4w== |
|---|---|
| Final Action Date | 2011-08-04 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0004267712 |
| Model | PTX270AD |
| Frequency Range | 2031.5-2103.5 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | PTX-PRO Transmitter |
| Responsible Party | Salvatore Blatti, Manager, sal.blatti@vislink.com , 978-671-5700 |
| Test Firm | Jonathan Stewart, Curtis-Straus LLC., jonathan.stewart@us.bureauveritas.com  , 9784868880 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | B4: Microwave Radio Services equipment in 47 CFR Parts 27, 74, 101 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Powers listed are conducted. In order to comply with RF exposure requirements as a mobile device, in accordance with 2.1091, MPE compliance is demonstrated with a typical antenna gain as shown in this filing. The final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 0dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For temporary-fixed rapid deployment applications, MPE compliance is demonstrated with various antenna gains as shown in this filing. When used for temporary-fixed rapid deployment applications, the final antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must not exceed 35dBi and the antenna(s) must be installed in accordance with the separation distances listed in this filing for the corresponding antenna gains. Further RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3) for temporary-fixed rapid deployment applications. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 16kjEpkpbsy+ojZPvjLV4w== | 2011-08-04 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 2031.5-2103.5 MHz | 0.795 | 5ppm | 12M0W7D | 74 |
| 2031.5-2103.5 MHz | 2.951 | 5ppm | 12M0F8W | 74 |
| 2454.25-2479.5 MHz | 0.795 | 5ppm | 12M0W7D | 74 |
| 2454.25-2479.5 MHz | 2.884 | 5ppm | 12M0F8W | 74 |
| 6431.25-6518.75 MHz | 1.738 | 5ppm | 25M0W7D | 101, 74 |
| 6431.25-6518.75 MHz | 3.715 | 5ppm | 25M0F8W | 101, 74 |
| 6881.25-7118.75 MHz | 1.585 | 5ppm | 25M0W7D | 74 |
| 6881.25-7118.75 MHz | 3.981 | 5ppm | 25M0F8W | 74 |
Grants
TCB Grant - Application 16kjEpkpbsy+ojZPvjLV4w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 08/04/2011 Application Dated: 08/04/2011 |
| Microwave Radio Communications LLC |
| 101 Billerica Avenue, Bldg. 6 |
| N. Billerica, MA 01862-1256 |
| Attention: Salvatore Blatti , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FC3PTX270AD |
| Name of Grantee: | Microwave Radio Communications LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | PTX-PRO Transmitter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 74 | 2031.5 - 2103.5 | 0.795 | 5.0 PM | 12M0W7D | |
| 74 | 2031.5 - 2103.5 | 2.951 | 5.0 PM | 12M0F8W | |
| 74 | 2454.25 - 2479.5 | 0.795 | 5.0 PM | 12M0W7D | |
| 74 | 2454.25 - 2479.5 | 2.884 | 5.0 PM | 12M0F8W | |
| 74, 101 | 6431.25 - 6518.75 | 1.738 | 5.0 PM | 25M0W7D | |
| 74, 101 | 6431.25 - 6518.75 | 3.715 | 5.0 PM | 25M0F8W | |
| 74 | 6881.25 - 7118.75 | 1.585 | 5.0 PM | 25M0W7D | |
| 74 | 6881.25 - 7118.75 | 3.981 | 5.0 PM | 25M0F8W |
| Powers listed are conducted. In order to comply with RF exposure requirements as a mobile device, in accordance with 2.1091, MPE compliance is demonstrated with a typical antenna gain as shown in this filing. The final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 0dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For temporary-fixed rapid deployment applications, MPE compliance is demonstrated with various antenna gains as shown in this filing. When used for temporary-fixed rapid deployment applications, the final antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must not exceed 35dBi and the antenna(s) must be installed in accordance with the separation distances listed in this filing for the corresponding antenna gains. Further RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3) for temporary-fixed rapid deployment applications. |
EAS Grant - Application 16kjEpkpbsy+ojZPvjLV4w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Microwave Radio Communications LLC 101 Billerica Avenue, Bldg. 6 N. Billerica, MA 01862-1256 United States |
Date of Grant: 08/04/2011 Application Dated: 08/04/2011 |
| Attention: Salvatore Blatti , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FC3PTX270AD |
| Name of Grantee: | Microwave Radio Communications LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | PTX-PRO Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 74 | 2031.5 - 2103.5 | 0.795 | 5.0 PM | 12M0W7D | |
| 74 | 2031.5 - 2103.5 | 2.951 | 5.0 PM | 12M0F8W | |
| 74 | 2454.25 - 2479.5 | 0.795 | 5.0 PM | 12M0W7D | |
| 74 | 2454.25 - 2479.5 | 2.884 | 5.0 PM | 12M0F8W | |
| 74, 101 | 6431.25 - 6518.75 | 1.738 | 5.0 PM | 25M0W7D | |
| 74, 101 | 6431.25 - 6518.75 | 3.715 | 5.0 PM | 25M0F8W | |
| 74 | 6881.25 - 7118.75 | 1.585 | 5.0 PM | 25M0W7D | |
| 74 | 6881.25 - 7118.75 | 3.981 | 5.0 PM | 25M0F8W |
| Powers listed are conducted. In order to comply with RF exposure requirements as a mobile device, in accordance with 2.1091, MPE compliance is demonstrated with a typical antenna gain as shown in this filing. The final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 0dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For temporary-fixed rapid deployment applications, MPE compliance is demonstrated with various antenna gains as shown in this filing. When used for temporary-fixed rapid deployment applications, the final antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must not exceed 35dBi and the antenna(s) must be installed in accordance with the separation distances listed in this filing for the corresponding antenna gains. Further RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3) for temporary-fixed rapid deployment applications. |
| Mail To: |