FCC ID FC3STATXU044T1AK
STRATA Microwave Transmitter
by Microwave Radio Communications LLC
Grantee Code: FC3 Product Code: STATXU044T1AK
Latest application date: 2009-06-12
FCC ID Device Details
| FCC ID | FC3STATXU044T1AK |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | FC3 |
| Product Code | STATXU044T1AK |
| Applicant Business | Microwave Radio Communications LLC 🇺🇸 |
| Related Domains |  vislink.com |
| Equipment Class | STRATA Microwave Transmitter |
| Test Firm | Curtis-Straus LLC |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 4940-4990 MHz | Class II permissive change or modification of presently authorized equipment | 2009-06-12 |
| 4940-4990 MHz | Original Equipment | 2007-04-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2007-04-03 | PDF 1.8 MB |
| Internal Photos | Internal Photos | 2007-04-03 | PDF 118.1 KB |
| External Photos | External Photos | 2007-04-03 | PDF 152.4 KB |
| Label | ID Label/Location Info | 2007-04-03 | PDF 290.8 KB |
| Operational Description | Operational Description | 2007-04-03 | PDF 807 KB |
| Test Setup Photos | Test Setup Photos | 2009-06-12 | PDF 1.5 MB |
| Test Report | Test Report | 2009-06-12 | PDF 169.8 KB |
| Test Report | Test Report | 2007-04-03 | PDF 2.5 MB |
| Cover Letter Agent Authorization | Cover Letter(s) | 2009-06-12 | PDF 32.2 KB |
| Cover Letter Class II Permissive Change Request | Cover Letter(s) | 2009-06-12 | PDF 260.4 KB |
| Confidentiality Request | Cover Letter(s) | 2007-04-03 | PDF 26.1 KB |
| MRC Response for Power Reduction vs Antenna Gain | Cover Letter(s) | 2007-04-03 | PDF 136.7 KB |
| RF Exposure Info | RF Exposure Info | 2007-04-03 | PDF 70.2 KB |
| RF Exposure Info Revised | RF Exposure Info | 2007-04-03 | PDF 87.3 KB |
Application Information
| Application ID | 0firuZdN12/emjYJu15obQ== |
|---|---|
| Final Action Date | 2009-06-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004267712 |
| Model | STATXU044T1AK |
| Frequency Range | 4940-4990 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | STRATA Microwave Transmitter |
| Responsible Party | Salvatore Blatti, Manager, sal.blatti@vislink.com , 978-671-5700 |
| Test Firm | Jonathan Stewart, Curtis-Straus LLC, jonathan.stewart@us.bureauveritas.com  , 9784868880 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II permissive change as detailed in this filing. Powers listed are conducted. In order to comply with RF exposure requirements as a mobile device, in accordance with 2.1091, MPE compliance is demonstrated with a typical antenna gain as shown in the filing. The final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 9 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When used for temporary-fixed rapid deployment applications, the final antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must not exceed 26 dBi and antenna(s) used for this transmitter must be installed to provide a separation distance of at least 233 cm from all persons. Further RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3) for temporary-fixed rapid deployment applications. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 0firuZdN12/emjYJu15obQ== | 2009-06-12 | Class II permissive change or modification of presently authorized equipment |
| ldlijdQzxfO8EWLWwoAlBw== | 2007-04-03 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ldlijdQzxfO8EWLWwoAlBw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 | Date of Grant: 04/03/2007 Application Dated: 04/03/2007 |
| Microwave Radio Communications LLC |
| 101 Billerica Avenue, Bldg. 6 |
| N. Billerica, MA 01862-1256 |
| Attention: Salvatore Blatti , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FC3STATXU044T1AK |
| Name of Grantee: | Microwave Radio Communications LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | STRATA Microwave Transmitter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 4940.0 - 4990.0 | 0.916 | 1.5 PM | 10M0D7W | |
| 90 | 4940.0 - 4990.0 | 1.581 | 1.5 PM | 20M0D7W | |
| 90 | 4940.0 - 4990.0 | 1.706 | 1.5 PM | 20M0F7W |
| Powers listed are conducted. In order to comply with RF exposure requirements as a mobile device, in accordance with 2.1091, MPE compliance is demonstrated with a typical antenna gain as shown in the filing. The final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 9 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When used for temporary-fixed rapid deployment applications, the final antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must not exceed 26 dBi and antenna(s) used for this transmitter must be installed to provide a separation distance of at least 233 cm from all persons. Further RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3) for temporary-fixed rapid deployment applications. |
EAS Grant - Application ldlijdQzxfO8EWLWwoAlBw==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Microwave Radio Communications LLC 101 Billerica Avenue, Bldg. 6 N. Billerica, MA 01862-1256 United States | Date of Grant: 04/03/2007 Application Dated: 04/03/2007 |
| Attention: Salvatore Blatti , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FC3STATXU044T1AK |
| Name of Grantee: | Microwave Radio Communications LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | STRATA Microwave Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 4940.0 - 4990.0 | 0.916 | 1.5 PM | 10M0D7W | |
| 90 | 4940.0 - 4990.0 | 1.581 | 1.5 PM | 20M0D7W | |
| 90 | 4940.0 - 4990.0 | 1.706 | 1.5 PM | 20M0F7W |
| Powers listed are conducted. In order to comply with RF exposure requirements as a mobile device, in accordance with 2.1091, MPE compliance is demonstrated with a typical antenna gain as shown in the filing. The final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 9 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When used for temporary-fixed rapid deployment applications, the final antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must not exceed 26 dBi and antenna(s) used for this transmitter must be installed to provide a separation distance of at least 233 cm from all persons. Further RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3) for temporary-fixed rapid deployment applications.
|
| Mail To: |
| EA333679 |
TCB Grant - Application 0firuZdN12/emjYJu15obQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 06/12/2009 Application Dated: 06/12/2009 |
| Microwave Radio Communications LLC |
| 101 Billerica Avenue, Bldg. 6 |
| N. Billerica, MA 01862-1256 |
| Attention: Salvatore Blatti , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FC3STATXU044T1AK |
| Name of Grantee: | Microwave Radio Communications LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | STRATA Microwave Transmitter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 4940.0 - 4990.0 | 0.977 | 1.5 PM | 8M00D7W | |
| 90 | 4940.0 - 4990.0 | 0.955 | 1.5 PM | 6M00D7W | |
| 90 | 4940.0 - 4990.0 | 0.916 | 1.5 PM | 10M0D7W | |
| 90 | 4940.0 - 4990.0 | 1.581 | 1.5 PM | 20M0D7W | |
| 90 | 4940.0 - 4990.0 | 1.706 | 1.5 PM | 20M0F7W |
| Class II permissive change as detailed in this filing. Powers listed are conducted. In order to comply with RF exposure requirements as a mobile device, in accordance with 2.1091, MPE compliance is demonstrated with a typical antenna gain as shown in the filing. The final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 9 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When used for temporary-fixed rapid deployment applications, the final antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must not exceed 26 dBi and antenna(s) used for this transmitter must be installed to provide a separation distance of at least 233 cm from all persons. Further RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3) for temporary-fixed rapid deployment applications. |
EAS Grant - Application 0firuZdN12/emjYJu15obQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Microwave Radio Communications LLC 101 Billerica Avenue, Bldg. 6 N. Billerica, MA 01862-1256 United States |
Date of Grant: 06/12/2009 Application Dated: 06/12/2009 |
| Attention: Salvatore Blatti , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FC3STATXU044T1AK |
| Name of Grantee: | Microwave Radio Communications LLC |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | STRATA Microwave Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 4940.0 - 4990.0 | 0.977 | 1.5 PM | 8M00D7W | |
| 90 | 4940.0 - 4990.0 | 0.955 | 1.5 PM | 6M00D7W | |
| 90 | 4940.0 - 4990.0 | 0.916 | 1.5 PM | 10M0D7W | |
| 90 | 4940.0 - 4990.0 | 1.581 | 1.5 PM | 20M0D7W | |
| 90 | 4940.0 - 4990.0 | 1.706 | 1.5 PM | 20M0F7W |
| Class II permissive change as detailed in this filing. Powers listed are conducted. In order to comply with RF exposure requirements as a mobile device, in accordance with 2.1091, MPE compliance is demonstrated with a typical antenna gain as shown in the filing. The final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed 9 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. When used for temporary-fixed rapid deployment applications, the final antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must not exceed 26 dBi and antenna(s) used for this transmitter must be installed to provide a separation distance of at least 233 cm from all persons. Further RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3) for temporary-fixed rapid deployment applications. |
| Mail To: |