FCC ID FDI-09101577-0
Air Station (High Power Wireless Router)
by BUFFALO INC.
Grantee Code: FDI Product Code: 091015770
Latest application date: 2005-10-06
FCC ID Device Details
| FCC ID | FDI-09101577-0 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | FDI |
| Product Code | 091015770 |
| Applicant Business | BUFFALO INC. 🇯🇵 |
| Related Domains | |
| Equipment Class | Air Station (High Power Wireless Router) |
| Test Firm | UL Japan, Inc. Yamakita EMC Lab. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-10-06 |
| 2412-2462 MHz | Original Equipment | 2005-08-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual 1 | Users Manual | 2005-08-06 | PDF 2.2 MB |
| Manual 2 | Users Manual | 2005-08-06 | PDF 2.9 MB |
| Manual 3 | Users Manual | 2005-08-06 | PDF 2.6 MB |
| Manual 4 | Users Manual | 2005-08-06 | PDF 2.5 MB |
| Manual 5 | Users Manual | 2005-08-06 | PDF 2.2 MB |
| Internal photos | Internal Photos | 2005-08-06 | PDF 161.7 KB |
| External photos | External Photos | 2005-10-06 | PDF 221.4 KB |
| External photos | External Photos | 2005-08-06 | PDF 139 KB |
| FCC ID label | ID Label/Location Info | 2005-08-06 | PDF 46 KB |
| FCC label location | ID Label/Location Info | 2005-08-06 | PDF 152.9 KB |
| Setup photos | Test Setup Photos | 2005-08-06 | PDF 257.1 KB |
| test report | Test Report | 2005-10-06 | PDF 3.3 MB |
| Test report | Test Report | 2005-08-06 | PDF 1.4 MB |
| Reason for PC2 | Cover Letter(s) | 2005-10-06 | PDF 67.9 KB |
| FCC declarations | Cover Letter(s) | 2005-08-06 | PDF 35.1 KB |
| POA | Cover Letter(s) | 2005-08-06 | PDF 24.6 KB |
| Request for confidentiality | Cover Letter(s) | 2005-08-06 | PDF 23.1 KB |
| MPE | RF Exposure Info | 2005-10-06 | PDF 81.5 KB |
| MPE | RF Exposure Info | 2005-08-06 | PDF 85 KB |
| Block diagram Metadata only | Block Diagram | PDF 9.9 KB | |
| Schematics Metadata only | Schematics | PDF 113.3 KB | |
| Operational description Metadata only | Operational Description | PDF 1.3 MB |
Application Information
| Application ID | krhzOimbxWCh3jpPXgEq2g== |
|---|---|
| Final Action Date | 2005-10-06 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005866322 |
| Model | 09101577-0 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Air Station (High Power Wireless Router) |
| Responsible Party | Mr. Masaya Ishimaru, General Manager, ishimaru@melcoinc.co.jp |
| Agent | Hisayuki Hisayuki Hisayuki, U.L Apex Co., ltd, hisayuki.kioka@jp.ul.com |
| Technical Contact | Toyokazu Imamura, UL Apex Co., Ltd., Toyokazu.Imamura@jp.ul.com |
| Test Firm | Tetsuya Hashimoto, UL Japan, Inc. Yamakita EMC Lab., Tetsuya.Hashimoto@jp.ul.com |
| TCB Email | hotline@atcb.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or similar, may be used with the transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| krhzOimbxWCh3jpPXgEq2g== | 2005-10-06 | Class II permissive change or modification of presently authorized equipment |
| 0ZIkklx10cf0y5YpWWoXIA== | 2005-08-06 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.3800000 | 15C |
Grants
TCB Grant - Application krhzOimbxWCh3jpPXgEq2g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/06/2005 Application Dated: 10/06/2005 |
| BUFFALO INC. |
| AKAMONDORI Bldg., 30-20, Ohsu 3-chome, Naka-ku |
| Nagoya, 460-8315 Japan |
| Attention: Mr. Masaya Ishimaru , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FDI-09101577-0 |
| Name of Grantee: | BUFFALO INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Air Station (High Power Wireless Router) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.38 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or similar, may be used with the transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application krhzOimbxWCh3jpPXgEq2g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
BUFFALO INC. AKAMONDORI Bldg., 30-20, Ohsu 3-chome, Naka-ku Nagoya, 460-8315 Japan |
Date of Grant: 10/06/2005 Application Dated: 10/06/2005 |
| Attention: Mr. Masaya Ishimaru , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FDI-09101577-0 |
| Name of Grantee: | BUFFALO INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Air Station (High Power Wireless Router) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.38 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or similar, may be used with the transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/06/2005 Application Dated: 08/06/2005 |
| BUFFALO INC. |
| AKAMONDORI Bldg., 30-20, Ohsu 3-chome, Naka-ku |
| Nagoya, 460-8315 Japan |
| Attention: Mr. Masaya Ishimaru , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FDI-09101577-0 |
| Name of Grantee: | BUFFALO INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Air Station (High Power Wireless Router) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.38 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or similar, may be used with the transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 0ZIkklx10cf0y5YpWWoXIA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
BUFFALO INC. AKAMONDORI Bldg., 30-20, Ohsu 3-chome, Naka-ku Nagoya, 460-8315 Japan |
Date of Grant: 08/06/2005 Application Dated: 08/06/2005 |
| Attention: Mr. Masaya Ishimaru , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FDI-09101577-0 |
| Name of Grantee: | BUFFALO INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Air Station (High Power Wireless Router) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.38 |
| Power Output listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only the antenna(s) tested in this filing, or similar, may be used with the transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |