FCC ID FIH76007

FHSS TRANSCEIVER MODULE

by TransCore

Grantee Code: FIH   Product Code: 76007
Latest application date: 2014-05-15

FCC ID Device Details

FCC IDFIH76007
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeFIH
Product Code76007
Applicant BusinessTransCore 🇺🇸
Related Domains transcore.com
Equipment ClassFHSS TRANSCEIVER MODULE
Test FirmRogers Labs, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2014-05-15
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2014-05-14
902.75-927.25 MHzOriginal Equipment2009-11-24

Exhibits

DocumentTypeAvailableFile
User Manual 1Users Manual2014-05-15PDF 3.3 MB
User Manual 2Users Manual2014-05-15PDF 3.1 MB
User Manual 3Users Manual2014-05-15PDF 3.5 MB
User Manual 1Users Manual2014-05-14PDF 4.8 MB
User Manual 2Users Manual2014-05-14PDF 4.5 MB
User Manual 3Users Manual2014-05-14PDF 3.9 MB
User Manual 4Users Manual2014-05-14PDF 2.9 MB
Users ManualUsers Manual2010-01-08PDF 3.8 MB
Internal PhotosInternal Photos2010-01-08PDF 519.9 KB
External PhotosExternal Photos2010-01-08PDF 252.2 KB
Label and LocationID Label/Location Info2014-05-15PDF 322.9 KB
Label and LocationID Label/Location Info2014-05-14PDF 327.6 KB
Label SampleID Label/Location Info2009-11-24PDF 114.8 KB
Test Setup PhotosTest Setup Photos2010-01-08PDF 311.6 KB
Test ReportTest Report2009-11-24PDF 765 KB
Authorization LetterCover Letter(s)2014-05-15PDF 40.1 KB
Permissive Change LetterCover Letter(s)2014-05-15PDF 109.1 KB
Permissive Change LetterCover Letter(s)2014-05-14PDF 109.1 KB
Authorization LetterCover Letter(s)2009-11-24PDF 175.1 KB
Confidential LetterCover Letter(s)2009-11-24PDF 26.8 KB
Module LetterCover Letter(s)2009-11-24PDF 17.6 KB
Short Term Confidential LetterCover Letter(s)2009-11-24PDF 18.6 KB
Submittal LetterCover Letter(s)2009-11-24PDF 20.1 KB
RF Exposure SAR ReportRF Exposure Info2014-05-14PDF 3 MB
RF ExposureRF Exposure Info2009-11-24PDF 17.6 KB
Tune up ProcedureParts List/Tune Up Info2009-11-24PDF 9.4 KB
RF Exposure SAR Report Metadata onlySDR Software/Security InfPDF 3.2 MB

Application Information

Application IDecBGKOnNIevPECRrZ7fkWQ==
Final Action Date2014-05-15
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0006083745
Model76007
Frequency Range902.75-927.25 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionFHSS TRANSCEIVER MODULE
Responsible PartyDale Scott, VP of Engineering and Manufacturing, dale.scott@transcore.com , 505 856-8178
Technical ContactJay Moulton, RF Exposure Lab, info@rfexposurelab.com , 7604712100
Test FirmScot Rogers, Rogers Labs, Inc., rogers@pixius.net , 913-837-3214
TCB EmailHotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091 and specific host products as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. Mobile products operating with this module are required to provide a minimum separation distance of 20cm. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final portable host product(s) only as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Highest reported SAR value for host device in this application is: 1.39 W/kg. Simultaneous SAR is calculated at 1.57 W/kg. This change is to request approval for portable category specific host tablet PC, model number: M9020. Antennas are of same type and lower gain from original approval.

Applications

Application IDDatePurpose
ecBGKOnNIevPECRrZ7fkWQ==2014-05-15Class II permissive change or modification of presently authorized equipment
A3j7+K0eP0GGQlY5tX95Zw==2014-05-14Class II permissive change or modification of presently authorized equipment
C2jv/cTnMPzm0NsJvVuNaA==2009-11-24Original Equipment

Equipment Authorization

FrequencyOutputRules
902.75-927.25 MHz1.000000015C

Grants

TCB Grant - Application ecBGKOnNIevPECRrZ7fkWQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/15/2014

Application Dated: 05/15/2014
TransCore
Amtech Technology Center
8600 Jefferson Street, NE
Albuquerque, NM 87113
 
Attention: Dale Scott , VP of Engineering and Manufacturing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FIH76007
Name of Grantee:  TransCore
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: FHSS TRANSCEIVER MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 1.0  

Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091 and specific host products as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. Mobile products operating with this module are required to provide a minimum separation distance of 20cm. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final portable host product(s) only as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Highest reported SAR value for host device in this application is: 1.39 W/kg. Simultaneous SAR is calculated at 1.57 W/kg.

This change is to request approval for portable category specific host tablet PC, model number: M9020. Antennas are of same type and lower gain from original approval.


EAS Grant - Application ecBGKOnNIevPECRrZ7fkWQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TransCore
Amtech Technology Center 8600 Jefferson Street, NE
Albuquerque, NM 87113
United States
  Date of Grant: 05/15/2014

Application Dated: 05/15/2014
 
Attention: Dale Scott , VP of Engineering and Manufacturing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FIH76007
Name of Grantee:  TransCore
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: FHSS TRANSCEIVER MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 1.0  

Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091 and specific host products as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. Mobile products operating with this module are required to provide a minimum separation distance of 20cm. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final portable host product(s) only as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Highest reported SAR value for host device in this application is: 1.39 W/kg. Simultaneous SAR is calculated at 1.57 W/kg.

This change is to request approval for portable category specific host tablet PC, model number: M9020. Antennas are of same type and lower gain from original approval.



TCB Grant - Application C2jv/cTnMPzm0NsJvVuNaA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 11/24/2009

Application Dated: 11/24/2009
TransCore
Amtech Technology Center
8600 Jefferson Street, NE
Albuquerque, NM 87113
 
Attention: Chris Wilson , Quality Assurance Supervisor

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FIH76007
Name of Grantee:  TransCore
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: FHSS TRANSCEIVER MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 1.0  

Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. Products operating with this module are required to provide a minimum separation distance of 20cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

EAS Grant - Application C2jv/cTnMPzm0NsJvVuNaA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TransCore
Amtech Technology Center 8600 Jefferson Street, NE
Albuquerque, NM 87113
United States
  Date of Grant: 11/24/2009

Application Dated: 11/24/2009
 
Attention: Chris Wilson , Quality Assurance Supervisor

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FIH76007
Name of Grantee:  TransCore
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: FHSS TRANSCEIVER MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 1.0  

Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. Products operating with this module are required to provide a minimum separation distance of 20cm. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.



TCB Grant - Application A3j7+K0eP0GGQlY5tX95Zw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/14/2014

Application Dated: 05/14/2014
TransCore
Amtech Technology Center
8600 Jefferson Street, NE
Albuquerque, NM 87113
 
Attention: Dale Scott , VP of Engineering and Manufacturing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FIH76007
Name of Grantee:  TransCore
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: FHSS TRANSCEIVER MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 1.0  

Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091 and specific host products as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. Mobile products operating with this module are required to provide a minimum separation distance of 20cm. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final portable host product(s) only as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Highest reported SAR value for host device in this application is: 1.37 W/kg. Simultaneous SAR is calculated at 1.39 W/kg.

This change is to request approval for portable category specific host tablet PC, model number: M9010. Antennas are of same type and lower gain from original approval.


EAS Grant - Application A3j7+K0eP0GGQlY5tX95Zw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

TransCore
Amtech Technology Center 8600 Jefferson Street, NE
Albuquerque, NM 87113
United States
  Date of Grant: 05/14/2014

Application Dated: 05/14/2014
 
Attention: Dale Scott , VP of Engineering and Manufacturing

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FIH76007
Name of Grantee:  TransCore
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: FHSS TRANSCEIVER MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 1.0  

Power output is conducted and measured at the antenna terminal. This is an OEM transmitter module approved for use in products operating as a mobile transmitting device with respect to 2.1091 and specific host products as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. MPE compliance was demonstrated with a typical antenna(s) gain as shown in the filing. Mobile products operating with this module are required to provide a minimum separation distance of 20cm. The SAR data in filings under this FCC ID is applicable to demonstrate compliance for final portable host product(s) only as shown in filings under this FCC ID. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Highest reported SAR value for host device in this application is: 1.37 W/kg. Simultaneous SAR is calculated at 1.39 W/kg.

This change is to request approval for portable category specific host tablet PC, model number: M9010. Antennas are of same type and lower gain from original approval.



Mail To: