FCC ID FKGR1102

802.11a/b/g/n/ac/ax+ BT M.2 form factor

by Twinhead International Corporation

Grantee Code: FKG   Product Code: R1102
Latest application date: 2022-09-02

FCC ID Device Details

FCC IDFKGR1102
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeFKG
Product CodeR1102
Applicant BusinessTwinhead International Corporation 🇹🇼
Related Domains twinhead.com.tw newbtl.com
Equipment Class802.11a/b/g/n/ac/ax+ BT M.2 form factor
Test FirmIntel Corporation S.A.S.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-09-02
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2022-09-02
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-09-02
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-09-02
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 02/17/20212022-08-17
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 02/17/20212022-08-17
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 02/17/20212022-08-17
5955-7115 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 04/26/20212022-08-17

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-02-28PDF 4 MB
Users ManualUsers Manual2023-02-28PDF 4 MB
Users ManualUsers Manual2023-02-11PDF 228.1 KB
Internal PhotosInternal Photos2023-02-28PDF 1.7 MB
External PhotosExternal Photos2023-02-28PDF 808.2 KB
External PhotosExternal Photos2023-02-11PDF 243.9 KB
SAR Test report_Appendix C-10External Photos2022-09-02PDF 2.8 MB
ID Label/Location InfoID Label/Location Info2022-09-02PDF 66.2 KB
ID Label/Location Info Metadata onlyID Label/Location Info2022-08-17PDF 493.4 KB
ID Label/Location Info_revised 0816ID Label/Location Info2022-08-17PDF 38.3 KB
ID Label/Location Info_revised0816ID Label/Location Info2022-08-17PDF 38.3 KB
Test Setup Photos_SARTest Setup Photos2023-02-28PDF 1.1 MB
SAR Test reportRF Exposure Info2022-09-02PDF 1.2 MB
SAR Test report_Appendix ARF Exposure Info2022-09-02PDF 264.8 KB
SAR Test report_Appendix BRF Exposure Info2022-09-02PDF 866.2 KB
SAR Test report_Appendix C-1RF Exposure Info2022-09-02PDF 4.8 MB
SAR Test report_Appendix C-10RF Exposure Info2022-09-02PDF 2.8 MB
SAR Test report_Appendix C-2RF Exposure Info2022-09-02PDF 4.9 MB
SAR Test report_Appendix C-3RF Exposure Info2022-09-02PDF 4.2 MB
SAR Test report_Appendix C-4RF Exposure Info2022-09-02PDF 4.4 MB
SAR Test report_Appendix C-5RF Exposure Info2022-09-02PDF 4.1 MB
SAR Test report_Appendix C-6RF Exposure Info2022-09-02PDF 3.7 MB
SAR Test report_Appendix C-7RF Exposure Info2022-09-02PDF 5 MB
SAR Test report_Appendix C-8RF Exposure Info2022-09-02PDF 4.4 MB
SAR Test report_Appendix C-9RF Exposure Info2022-09-02PDF 4.7 MB
Authorization LetterCover Letter(s)2022-09-02PDF 149.2 KB
Class II permissive change format letterCover Letter(s)2022-09-02PDF 194.6 KB
FCC RSE Justification LetterCover Letter(s)2022-09-02PDF 198.7 KB
FCC Request for non-disclosureCover Letter(s)2022-09-02PDF 256.3 KB
Model Declaration LetterCover Letter(s)2022-09-02PDF 154.7 KB
Change in ID Authorization LetterCover Letter(s)2022-08-17PDF 90.2 KB
ConfidentialityCover Letter(s)2022-08-17PDF 347.4 KB
Declaration of authorizationCover Letter(s)2022-08-17PDF 149.2 KB
Request for Change in FCC IDCover Letter(s)2022-08-17PDF 244.2 KB
Antenna Spec Metadata onlyOperational DescriptionPDF 1.5 MB
Software security Metadata onlyOperational DescriptionPDF 941.1 KB
Software security Metadata onlySDR Software/Security InfPDF 941.1 KB

Application Information

Application IDrrn93IY7DpBeCCbaAK+Bbw==
Final Action Date2022-09-02
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009658667
ModelR1102
Equipment ClassJBP - Part 15 Class B Computing Device Peripheral
Device Description802.11a/b/g/n/ac/ax+ BT M.2 form factor
Responsible PartyJames Lai, Manager, Systems Engineering Dept, James_lai@twinhead.com.tw , (886) 2 5589-9999
AgentGrace Grace Grace, BTL Inc., Grace.chen@newbtl.com , 886-2-2641-8198
Technical ContactScott Hsu, BTL Inc., Scott.Hus@newbtl.com , 886-2-2641-8198
Non-Technical ContactGrace Chen, BTL Inc., Grace.chen@newbtl.com , 886-2-2641-8198
Test FirmNawfal ASRIH, Intel Corporation S.A.S., nawfal.asrih@intel.com , 003349300962
TCB Emailcertification@telefication.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/28/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
rrn93IY7DpBeCCbaAK+Bbw==2022-09-02Class II permissive change or modification of presently authorized equipment
nKrMcBrvyjHJyUDft+T4lA==2022-09-02Class II permissive change or modification of presently authorized equipment
LEc0ehh6sIFt+jjIQp7URw==2022-09-02Class II permissive change or modification of presently authorized equipment
E+Ut4bjfQYaCQAT5PXUvhg==2022-09-02Class II permissive change or modification of presently authorized equipment
BIuDNCwLUxDD+00z4gW3SA==2022-09-02Class II permissive change or modification of presently authorized equipment
rhZD4phxmRKhDUuTLL5oug==2022-08-17Change in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 02/17/2021
lTU0IfHsrwgJ9I6WqmEzCw==2022-08-17Change in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 02/17/2021
UoWtCcTJMO3sQPLEq0LWIA==2022-08-17Change in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 02/17/2021
MuJ9W3oOqQ9hqMt0W7jQZw==2022-08-17Change in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 02/17/2021
KRxu7WNlhrPAXmM3CVxsJQ==2022-08-17Change in identification of presently authorized equipment. Original FCC ID: PD9AX211NG Grant Date: 04/26/2021

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
2402-2480 MHz0.00915CCC
2402-2480 MHz0.011000015CCC
2412-2472 MHz0.97915CCC, MO
2422-2462 MHz0.83615CCC, MO
5190-5230 MHz0.18215ECC, MO
5210 MHz0.09315ECC, MO
5250 MHz0.06415ECC, MO
5260-5320 MHz0.15215ECC, MO, ND
5270-5310 MHz0.19415ECC, MO, ND
5290 MHz0.08815ECC, MO, ND
5500-5700 MHz0.15415ECC, MO, ND
5510-5670 MHz0.24915ECC, MO, ND
5530-5690 MHz0.21515ECC, MO, ND
5710 MHz0.12215ECC, MO, ND
5720 MHz0.10415ECC, MO, ND
5745-5825 MHz0.25415ECC, MO
5755-5795 MHz0.25715ECC, MO
5775 MHz0.21215ECC, MO
5955-7115 MHz0.00315ECC, EP, MO
5965-7085 MHz0.00715ECC, EP, MO
5985-7025 MHz0.01215ECC, EP, MO
6025-6985 MHz0.02115ECC, EP, MO

Grants

TCB Grant - Application UoWtCcTJMO3sQPLEq0LWIA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/17/2022

Application Dated: 08/09/2022
Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.009  
CC MO 15C 2412.0  -  2472.0 0.979  
CC MO 15C 2422.0  -  2462.0 0.836  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application UoWtCcTJMO3sQPLEq0LWIA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
  Date of Grant: 08/17/2022

Application Dated: 08/09/2022
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.009  
CC MO 15C 2412.0  -  2472.0 0.979  
CC MO 15C 2422.0  -  2462.0 0.836  

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application rrn93IY7DpBeCCbaAK+Bbw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 09/02/2022

Application Dated: 08/31/2022
Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application rrn93IY7DpBeCCbaAK+Bbw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
  Date of Grant: 09/02/2022

Application Dated: 08/31/2022
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application rhZD4phxmRKhDUuTLL5oug==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/17/2022

Application Dated: 08/09/2022
Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.011  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application rhZD4phxmRKhDUuTLL5oug==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
  Date of Grant: 08/17/2022

Application Dated: 08/09/2022
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.011  

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application nKrMcBrvyjHJyUDft+T4lA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 09/02/2022

Application Dated: 08/31/2022
Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.011  

CIIPC: The subject approved module is being used in a host: Tablet (Model: R11XXXXXX(X=0-9,A-Z,a-z,Blank), Pad-Ex 01P8DZ2,Pad-Ex 01P8D2/Brand: DURABOOK, Ecom Instruments GmbH) . The highest reported SAR values are Body and Simultaneous SAR, 0.15 W/kg and 0.58 W/kg respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application nKrMcBrvyjHJyUDft+T4lA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
  Date of Grant: 09/02/2022

Application Dated: 08/31/2022
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.011  

CIIPC: The subject approved module is being used in a host: Tablet (Model: R11XXXXXX(X=0-9,A-Z,a-z,Blank), Pad-Ex 01P8DZ2,Pad-Ex 01P8D2/Brand: DURABOOK, Ecom Instruments GmbH) . The highest reported SAR values are Body and Simultaneous SAR, 0.15 W/kg and 0.58 W/kg respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application MuJ9W3oOqQ9hqMt0W7jQZw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/17/2022

Application Dated: 08/09/2022
Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.152  
CC MO 15E 5190.0  -  5230.0 0.182  
CC MO 15E 5210.0  -  5210.0 0.093  
CC MO 15E 5250.0  -  5250.0 0.064  
CC MO ND 15E 5260.0  -  5320.0 0.152  
CC MO ND 15E 5270.0  -  5310.0 0.194  
CC MO ND 15E 5290.0  -  5290.0 0.088  
CC MO ND 15E 5500.0  -  5700.0 0.154  
CC MO ND 15E 5510.0  -  5670.0 0.249  
CC MO ND 15E 5710.0  -  5710.0 0.122  
CC MO ND 15E 5720.0  -  5720.0 0.104  
CC MO ND 15E 5530.0  -  5690.0 0.215  
CC MO 15E 5745.0  -  5825.0 0.254  
CC MO 15E 5755.0  -  5795.0 0.257  
CC MO 15E 5775.0  -  5775.0 0.212  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application MuJ9W3oOqQ9hqMt0W7jQZw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
  Date of Grant: 08/17/2022

Application Dated: 08/09/2022
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.152  
CC MO 15E 5190.0  -  5230.0 0.182  
CC MO 15E 5210.0  -  5210.0 0.093  
CC MO 15E 5250.0  -  5250.0 0.064  
CC MO ND 15E 5260.0  -  5320.0 0.152  
CC MO ND 15E 5270.0  -  5310.0 0.194  
CC MO ND 15E 5290.0  -  5290.0 0.088  
CC MO ND 15E 5500.0  -  5700.0 0.154  
CC MO ND 15E 5510.0  -  5670.0 0.249  
CC MO ND 15E 5710.0  -  5710.0 0.122  
CC MO ND 15E 5720.0  -  5720.0 0.104  
CC MO ND 15E 5530.0  -  5690.0 0.215  
CC MO 15E 5745.0  -  5825.0 0.254  
CC MO 15E 5755.0  -  5795.0 0.257  
CC MO 15E 5775.0  -  5775.0 0.212  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application lTU0IfHsrwgJ9I6WqmEzCw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/17/2022

Application Dated: 08/09/2022
Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application lTU0IfHsrwgJ9I6WqmEzCw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
  Date of Grant: 08/17/2022

Application Dated: 08/09/2022
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application LEc0ehh6sIFt+jjIQp7URw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 09/02/2022

Application Dated: 08/31/2022
Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.003  
CC EP MO 15E 5965.0  -  7085.0 0.007  
CC EP MO 15E 5985.0  -  7025.0 0.012  
CC EP MO 15E 6025.0  -  6985.0 0.021  

CIIPC: The subject approved module is being used in a host: Tablet (Model: R11XXXXXX(X=0-9,A-Z,a-z,Blank), Pad-Ex 01P8DZ2,Pad-Ex 01P8D2/Brand: DURABOOK, Ecom Instruments GmbH) . The highest reported SAR values are Body and Simultaneous SAR, 1.09 W/kg and 1.50 W/kg respectively.

Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application LEc0ehh6sIFt+jjIQp7URw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
  Date of Grant: 09/02/2022

Application Dated: 08/31/2022
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.003  
CC EP MO 15E 5965.0  -  7085.0 0.007  
CC EP MO 15E 5985.0  -  7025.0 0.012  
CC EP MO 15E 6025.0  -  6985.0 0.021  

CIIPC: The subject approved module is being used in a host: Tablet (Model: R11XXXXXX(X=0-9,A-Z,a-z,Blank), Pad-Ex 01P8DZ2,Pad-Ex 01P8D2/Brand: DURABOOK, Ecom Instruments GmbH) . The highest reported SAR values are Body and Simultaneous SAR, 1.09 W/kg and 1.50 W/kg respectively.

Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application KRxu7WNlhrPAXmM3CVxsJQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/17/2022

Application Dated: 08/09/2022
Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.003  
CC EP MO 15E 5965.0  -  7085.0 0.007  
CC EP MO 15E 5985.0  -  7025.0 0.012  
CC EP MO 15E 6025.0  -  6985.0 0.021  

Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application KRxu7WNlhrPAXmM3CVxsJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
  Date of Grant: 08/17/2022

Application Dated: 08/09/2022
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.003  
CC EP MO 15E 5965.0  -  7085.0 0.007  
CC EP MO 15E 5985.0  -  7025.0 0.012  
CC EP MO 15E 6025.0  -  6985.0 0.021  

Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application E+Ut4bjfQYaCQAT5PXUvhg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 09/02/2022

Application Dated: 08/31/2022
Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.152  
CC MO 15E 5190.0  -  5230.0 0.182  
CC MO 15E 5210.0  -  5210.0 0.093  
CC MO ND 15E 5260.0  -  5320.0 0.152  
CC MO ND 15E 5270.0  -  5310.0 0.194  
CC MO ND 15E 5290.0  -  5290.0 0.088  
CC MO ND 15E 5500.0  -  5700.0 0.154  
CC MO ND 15E 5510.0  -  5670.0 0.249  
CC MO ND 15E 5710.0  -  5710.0 0.122  
CC MO ND 15E 5720.0  -  5720.0 0.104  
CC MO ND 15E 5530.0  -  5690.0 0.215  
CC MO 15E 5745.0  -  5825.0 0.254  
CC MO 15E 5755.0  -  5795.0 0.257  
CC MO 15E 5775.0  -  5775.0 0.212  

CIIPC: The subject approved module is being used in a host: Tablet (Model: R11XXXXXX(X=0-9,A-Z,a-z,Blank), Pad-Ex 01P8DZ2,Pad-Ex 01P8D2/Brand: DURABOOK, Ecom Instruments GmbH) . The highest reported SAR values are Body and Simultaneous SAR, 1.15 W/kg and 1.22 W/kg respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

PC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application E+Ut4bjfQYaCQAT5PXUvhg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
  Date of Grant: 09/02/2022

Application Dated: 08/31/2022
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.152  
CC MO 15E 5190.0  -  5230.0 0.182  
CC MO 15E 5210.0  -  5210.0 0.093  
CC MO ND 15E 5260.0  -  5320.0 0.152  
CC MO ND 15E 5270.0  -  5310.0 0.194  
CC MO ND 15E 5290.0  -  5290.0 0.088  
CC MO ND 15E 5500.0  -  5700.0 0.154  
CC MO ND 15E 5510.0  -  5670.0 0.249  
CC MO ND 15E 5710.0  -  5710.0 0.122  
CC MO ND 15E 5720.0  -  5720.0 0.104  
CC MO ND 15E 5530.0  -  5690.0 0.215  
CC MO 15E 5745.0  -  5825.0 0.254  
CC MO 15E 5755.0  -  5795.0 0.257  
CC MO 15E 5775.0  -  5775.0 0.212  

CIIPC: The subject approved module is being used in a host: Tablet (Model: R11XXXXXX(X=0-9,A-Z,a-z,Blank), Pad-Ex 01P8DZ2,Pad-Ex 01P8D2/Brand: DURABOOK, Ecom Instruments GmbH) . The highest reported SAR values are Body and Simultaneous SAR, 1.15 W/kg and 1.22 W/kg respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

PC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application BIuDNCwLUxDD+00z4gW3SA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 09/02/2022

Application Dated: 08/31/2022
Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.009  
CC MO 15C 2412.0  -  2472.0 0.979  
CC MO 15C 2422.0  -  2462.0 0.836  

CIIPC: The subject approved module is being used in a host: Tablet (Model: R11XXXXXX(X=0-9,A-Z,a-z,Blank), Pad-Ex 01P8DZ2,Pad-Ex 01P8D2/Brand: DURABOOK, Ecom Instruments GmbH) . The highest reported SAR values are Body and Simultaneous SAR, 1.09 W/kg and 1.09 W/kg respectively.

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application BIuDNCwLUxDD+00z4gW3SA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Twinhead International Corporation
11F, No. 550, Rueiguang Rd
Neihu, Taipei, 114
Taiwan
  Date of Grant: 09/02/2022

Application Dated: 08/31/2022
 
Attention: James Lai , Manager, Systems Engineering Dept

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  FKGR1102
Name of Grantee:  Twinhead International Corporation
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac/ax+ BT M.2 form factor
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.009  
CC MO 15C 2412.0  -  2472.0 0.979  
CC MO 15C 2422.0  -  2462.0 0.836  

CIIPC: The subject approved module is being used in a host: Tablet (Model: R11XXXXXX(X=0-9,A-Z,a-z,Blank), Pad-Ex 01P8DZ2,Pad-Ex 01P8D2/Brand: DURABOOK, Ecom Instruments GmbH) . The highest reported SAR values are Body and Simultaneous SAR, 1.09 W/kg and 1.09 W/kg respectively.

Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: