FCC ID FNECMP-10BT
Mobile Thermal Printer ( W/ Bluetooth )
by Japan CBM Corporation
Grantee Code: FNE Product Code: CMP10BT
Latest application date: 2004-09-13
FCC ID Device Details
| FCC ID | FNECMP-10BT |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | FNE |
| Product Code | CMP10BT |
| Applicant Business | Japan CBM Corporation 🇯🇵 |
| Equipment Class | Mobile Thermal Printer ( W/ Bluetooth ) |
| Test Firm | Japan Quality Assurance Org. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2004-09-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2004-09-13 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2004-09-13 | PDF 163.6 KB |
| External Photos | External Photos | 2004-09-13 | PDF 2.5 MB |
| FCC ID Label | ID Label/Location Info | 2004-09-13 | PDF 52.9 KB |
| Setup Photos | Test Setup Photos | 2004-09-13 | PDF 34.9 KB |
| Test Report | Test Report | 2004-09-13 | PDF 217.2 KB |
| Test Report | Test Report | 2004-09-13 | PDF 352 KB |
| Agent Authorization Letter | Cover Letter(s) | 2004-09-13 | PDF 958.6 KB |
| Request for Confidentiality | Cover Letter(s) | 2004-09-13 | PDF 680.4 KB |
| TCB Q and A | Cover Letter(s) | 2004-09-13 | PDF 11.3 KB |
| Parts List | Parts List/Tune Up Info | 2004-09-13 | PDF 1.1 MB |
| Block Diagram Metadata only | Block Diagram | PDF 53.1 KB | |
| Bluetooth Schematics Metadata only | Schematics | PDF 30.5 KB | |
| Schematics Metadata only | Schematics | PDF 244.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 9.9 KB |
Application Information
| Application ID | irtQr6xnkv5Jn4Pdqb0FJQ== |
|---|---|
| Final Action Date | 2004-09-13 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0011508934 |
| Model | CMP-10BT |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Mobile Thermal Printer ( W/ Bluetooth ) |
| Responsible Party | Y Funahashi |
| Test Firm | Tetsuo Kato, Japan Quality Assurance Org., @., 81-(03)-3416-0111 |
| TCB Email | mkuo@ccsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output is conducted. The antenna(s) used with this transmitter must not be collocated with any other transmitters. End users must be informed of the requirements for satisfying RF Exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| irtQr6xnkv5Jn4Pdqb0FJQ== | 2004-09-13 | Original Equipment |
| E89z7+1Wp5M6gFD6ubsaQQ== | 2004-09-13 | Original Equipment |
Grants
TCB Grant - Application irtQr6xnkv5Jn4Pdqb0FJQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/13/2004 Application Dated: 09/13/2004 |
| Japan CBM Corporation |
| 1-1-48 Okubo Shinjuku-ku |
| Tokyo, Japan |
| Attention: Y Funahashi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FNECMP-10BT |
| Name of Grantee: | Japan CBM Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Mobile Thermal Printer ( W/ Bluetooth ) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00087 |
| Power Output is conducted. The antenna(s) used with this transmitter must not be collocated with any other transmitters. End users must be informed of the requirements for satisfying RF Exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application irtQr6xnkv5Jn4Pdqb0FJQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Japan CBM Corporation 1-1-48 Okubo Shinjuku-ku Tokyo, Japan |
Date of Grant: 09/13/2004 Application Dated: 09/13/2004 |
| Attention: Y Funahashi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FNECMP-10BT |
| Name of Grantee: | Japan CBM Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Mobile Thermal Printer ( W/ Bluetooth ) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00087 |
| Power Output is conducted. The antenna(s) used with this transmitter must not be collocated with any other transmitters. End users must be informed of the requirements for satisfying RF Exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/13/2004 Application Dated: 09/13/2004 |
| Japan CBM Corporation |
| 1-1-48 Okubo Shinjuku-ku |
| Tokyo, Japan |
| Attention: Y Funahashi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FNECMP-10BT |
| Name of Grantee: | Japan CBM Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Mobile Thermal Printer ( w/ Bluetooth ) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 19 CC | 15B | - |
| 19: | This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application E89z7+1Wp5M6gFD6ubsaQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Japan CBM Corporation 1-1-48 Okubo Shinjuku-ku Tokyo, Japan |
Date of Grant: 09/13/2004 Application Dated: 09/13/2004 |
| Attention: Y Funahashi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | FNECMP-10BT |
| Name of Grantee: | Japan CBM Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Mobile Thermal Printer ( w/ Bluetooth ) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 19 CC | 15B | - |
| 19: | This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |