FCC ID G95UCW4060MCS

Set Top Box

by Vantiva USA LLC

Grantee Code: G95   Product Code: UCW4060MCS
Latest application date: 2023-08-23

FCC ID Device Details

FCC IDG95UCW4060MCS
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeG95
Product CodeUCW4060MCS
Applicant BusinessVantiva USA LLC 🇺🇸
Related Domains vantiva.com
Equipment ClassSet Top Box
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2023-08-23
2412-2462 MHzOriginal Equipment2023-08-23
5180-5240 MHzOriginal Equipment2023-08-23

Exhibits

DocumentTypeAvailableFile
User manual-1Users Manual2024-02-19PDF 636.5 KB
User manual1Users Manual2024-02-19PDF 636.5 KB
User manual2Users Manual2024-02-19PDF 382 KB
Internal PhotosInternal Photos2024-02-19PDF 1.8 MB
External PhotoExternal Photos2024-02-19PDF 1.1 MB
External PhotosExternal Photos2024-02-19PDF 1.1 MB
Label and LocationID Label/Location Info2023-08-23PDF 1.1 MB
Label and locationID Label/Location Info2023-08-23PDF 1.1 MB
LabelandLocationID Label/Location Info2023-08-23PDF 1.1 MB
Test Setup PhotosTest Setup Photos2024-02-19PDF 745.9 KB
Test photosTest Setup Photos2024-02-19PDF 745.9 KB
Antenna SpecificationsTest Report2023-08-23PDF 1.1 MB
FCCP-2-2306C197R00 BLETest Report2023-08-23PDF 1,002.8 KB
FCCP-3-2306C197R00 WLAN2.4GTest Report2023-08-23PDF 4 MB
RLANBand1-4Rev0814 part1Test Report2023-08-23PDF 5.4 MB
RLANBand1-4Rev0814 part2Test Report2023-08-23PDF 4.2 MB
Test ReportTest Report2023-08-23PDF 1.7 MB
Test Reports BTL-FCCP-5-2306C197R01_DFSSlaveTest Report2023-08-23PDF 628.5 KB
2.911 (d)(5)(i)(ii)CertificationEquipmentTypev1.2(1)Attestation Statements2023-08-23PDF 356.3 KB
2.911 (d)(5)(i)(ii)CertificiationApplicantv1.2(1)Attestation Statements2023-08-23PDF 356.3 KB
2.911 (d)(7)USAgentforServiceofProcessv1.2Attestation Statements2023-08-23PDF 304.6 KB
2.911_(d)(5)(ii)(i) Certificiation Applicant v1.3Attestation Statements2023-08-23PDF 356.3 KB
2.911_(d)(7) US Agent for Service of Process v1.3Attestation Statements2023-08-23PDF 304.6 KB
Agent Authorization for BTLCover Letter(s)2023-08-23PDF 309.4 KB
Agent Authorization for micomlabsCover Letter(s)2023-08-23PDF 340.7 KB
AgentAuthorizationRev1.0Cover Letter(s)2023-08-23PDF 309.4 KB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2023-08-23PDF 420.3 KB
FCC Software Configuration Control Declaration Rev1.0Cover Letter(s)2023-08-23PDF 356.7 KB
Long_Term_ConfidentialityCover Letter(s)2023-08-23PDF 420.3 KB
MPERF Exposure Info2023-08-23PDF 277 KB
Block Metadata onlyBlock DiagramPDF 63.9 KB
Block diagram Metadata onlyBlock DiagramPDF 63.9 KB
SCH Metadata onlySchematicsPDF 2.1 MB
OP Metadata onlyOperational DescriptionPDF 678.1 KB
FCC Software Security Requirements for UNII devices Rev 2.1 Metadata onlySDR Software/Security InfPDF 1.7 MB

Application Information

Application IDYUnqRTjX/QUnrbKkyqVJPg==
Final Action Date2023-08-23
Application PurposeOriginal Equipment
Applicant FRN0033877549
ModelUCW4060MCS
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionSet Top Box
Responsible PartyRobert Lyall, Principal Certification Engineer, Robert.Lyall@vantiva.com , 770-212-9009
Technical ContactVantiva USA LLC, Robert.Lyall@vantiva.com
Test FirmJackie Chiu, BTL Inc., jackie@newbtl.com , +886-2-2641-8198
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/19/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
YUnqRTjX/QUnrbKkyqVJPg==2023-08-23Original Equipment
Vbo4BCYoeebgqDmdS8BLZQ==2023-08-23Original Equipment
6VmFP4OLtMingYw6D7Q6qw==2023-08-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.015815CCC
2402-2480 MHz0.015700015CCC
2412-2462 MHz0.216815CCC, MO
5180-5240 MHz0.205515ECC, MO
5260-5320 MHz0.197615ECC, MO, ND
5500-5700 MHz0.213515ECC, MO, ND
5745-5825 MHz0.340315ECC, MO

Grants

TCB Grant - Application YUnqRTjX/QUnrbKkyqVJPg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/23/2023

Application Dated: 08/23/2023
Vantiva USA LLC
4855 Peachtree Industrial Blvd.
Suite 200
Norcross, GA 30092
 
Attention: Robert Lyall , Principal Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  G95UCW4060MCS
Name of Grantee:  Vantiva USA LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Set Top Box
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0157  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application YUnqRTjX/QUnrbKkyqVJPg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vantiva USA LLC
4855 Peachtree Industrial Blvd. Suite 200
Norcross, GA 30092
United States
  Date of Grant: 08/23/2023

Application Dated: 08/23/2023
 
Attention: Robert Lyall , Principal Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  G95UCW4060MCS
Name of Grantee:  Vantiva USA LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Set Top Box
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0157  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Vbo4BCYoeebgqDmdS8BLZQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/23/2023

Application Dated: 08/23/2023
Vantiva USA LLC
4855 Peachtree Industrial Blvd.
Suite 200
Norcross, GA 30092
 
Attention: Robert Lyall , Principal Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  G95UCW4060MCS
Name of Grantee:  Vantiva USA LLC
Equipment Class: Digital Transmission System
Notes: Set Top Box
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0158  
CC MO 15C 2412.0  -  2462.0 0.2168  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Vbo4BCYoeebgqDmdS8BLZQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vantiva USA LLC
4855 Peachtree Industrial Blvd. Suite 200
Norcross, GA 30092
United States
  Date of Grant: 08/23/2023

Application Dated: 08/23/2023
 
Attention: Robert Lyall , Principal Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  G95UCW4060MCS
Name of Grantee:  Vantiva USA LLC
Equipment Class: Digital Transmission System
Notes: Set Top Box
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0158  
CC MO 15C 2412.0  -  2462.0 0.2168  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 6VmFP4OLtMingYw6D7Q6qw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/23/2023

Application Dated: 08/23/2023
Vantiva USA LLC
4855 Peachtree Industrial Blvd.
Suite 200
Norcross, GA 30092
 
Attention: Robert Lyall , Principal Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  G95UCW4060MCS
Name of Grantee:  Vantiva USA LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Set Top Box
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.2055  
CC MO ND 15E 5260.0  -  5320.0 0.1976  
CC MO ND 15E 5500.0  -  5700.0 0.2135  
CC MO 15E 5745.0  -  5825.0 0.3403  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 6VmFP4OLtMingYw6D7Q6qw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vantiva USA LLC
4855 Peachtree Industrial Blvd. Suite 200
Norcross, GA 30092
United States
  Date of Grant: 08/23/2023

Application Dated: 08/23/2023
 
Attention: Robert Lyall , Principal Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  G95UCW4060MCS
Name of Grantee:  Vantiva USA LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Set Top Box
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.2055  
CC MO ND 15E 5260.0  -  5320.0 0.1976  
CC MO ND 15E 5500.0  -  5700.0 0.2135  
CC MO 15E 5745.0  -  5825.0 0.3403  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: