FCC ID G9H2-1008A

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669

Date of Grant: 12/05/2003 Application Dated: 12/05/2003

Thomson Inc.

101 West 103rd Street

Indianapolis, IN 46290-1102

Attention: Roger Hunt , Manager - Product Safety and Regulatory

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	G9H2-1008A
Name of Grantee:	Thomson Inc.
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	2.4GHz SINGLE-LINE SPREAD SPECTRUM

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
68 CE	15C	2401.8  -  2479.4	0.055
68 CE	15C	2401.8  -  2479.4	0.087

Listed power is conducted. Powers for the Base and the Handset units are respectively 55 and 87mW. These devices must transmit with a duty factor not exceeding 19.5%, controlled by protocol firmware. Handset: For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt-clip supplied with this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Body-worn: 0.05 W/kg, Head: 0.08 W/kg. Base: The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

68:	This grant does not pertain to equipment approval requirements under Part 68.
CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Thomson Inc. 101 West 103rd Street Indianapolis, IN 46290-1102 United States

Date of Grant: 12/05/2003 Application Dated: 12/05/2003

Attention: Roger Hunt , Manager - Product Safety and Regulatory

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	G9H2-1008A
Name of Grantee:	Thomson Inc.
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	2.4GHz SINGLE-LINE SPREAD SPECTRUM
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
68 CE	15C	2401.8  -  2479.4	0.055
68 CE	15C	2401.8  -  2479.4	0.087

Listed power is conducted. Powers for the Base and the Handset units are respectively 55 and 87mW. These devices must transmit with a duty factor not exceeding 19.5%, controlled by protocol firmware. Handset: For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt-clip supplied with this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Body-worn: 0.05 W/kg, Head: 0.08 W/kg. Base: The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

68:	This grant does not pertain to equipment approval requirements under Part 68.
CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application 4GjDTeCyxEMKhNdGHvsLcg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669

Date of Grant: 08/14/2003 Application Dated: 08/14/2003

Thomson Inc.

101 West 103rd Street

Indianapolis, IN 46290-1102

Attention: Roger Hunt , Manager - Product Safety and Regulatory

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	G9H2-1008A
Name of Grantee:	Thomson Inc.
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	2.4GHz SINGLE LINE SPREAD SPECTRUM

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
68 CE	15C	2401.8  -  2479.4	0.055
68 CE	15C	2401.8  -  2479.4	0.087

Listed power is conducted. Powers for the Base and the Handset units are respectively 55 and 87mW. These devices must transmit with a duty factor not exceeding 19.5%, controlled by protocol firmware. Handset: For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt-clip supplied with this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Body-worn: 0.05 W/kg, Head: 0.08 W/kg. Base: The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

68:	This grant does not pertain to equipment approval requirements under Part 68.
CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Thomson Inc. 101 West 103rd Street Indianapolis, IN 46290-1102 United States

Date of Grant: 08/14/2003 Application Dated: 08/14/2003

Attention: Roger Hunt , Manager - Product Safety and Regulatory

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	G9H2-1008A
Name of Grantee:	Thomson Inc.
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	2.4GHz SINGLE LINE SPREAD SPECTRUM
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
68 CE	15C	2401.8  -  2479.4	0.055
68 CE	15C	2401.8  -  2479.4	0.087

Listed power is conducted. Powers for the Base and the Handset units are respectively 55 and 87mW. These devices must transmit with a duty factor not exceeding 19.5%, controlled by protocol firmware. Handset: For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt-clip supplied with this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Body-worn: 0.05 W/kg, Head: 0.08 W/kg. Base: The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

68:	This grant does not pertain to equipment approval requirements under Part 68.
CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: