FCC ID GKR-BCM94312MCG
802.11g Wireless LAN PCI-E Mini Card
by Compal Electronics Inc
Grantee Code: GKR Product Code: BCM94312MCG
Latest application date: 2009-05-13
FCC ID Device Details
| FCC ID | GKR-BCM94312MCG |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | GKR |
| Product Code | BCM94312MCG |
| Applicant Business | Compal Electronics Inc 🇹🇼 |
| Related Domains |  compal.com |
| Equipment Class | 802.11g Wireless LAN PCI-E Mini Card |
| Test Firm | Compliance Certification Services Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2009-05-13 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1028 Grant Date: 07/28/2007 | 2009-04-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual 1 of 3 | Users Manual | 2009-05-13 | PDF 1.7 MB |
| User manual 2 of 3 | Users Manual | 2009-05-13 | PDF 1.6 MB |
| User manual 3 of 3 | Users Manual | 2009-05-13 | PDF 1.5 MB |
| Internal photos | Internal Photos | 2009-05-13 | PDF 924.5 KB |
| External photos of the host | External Photos | 2009-05-13 | PDF 582 KB |
| External photos | External Photos | 2009-04-27 | PDF 294.5 KB |
| Label format and location revised | ID Label/Location Info | 2009-05-13 | PDF 1.7 MB |
| Label format and location | ID Label/Location Info | 2009-04-27 | PDF 440.2 KB |
| Test setup photos | Test Setup Photos | 2009-05-13 | PDF 672.8 KB |
| SAR test report | RF Exposure Info | 2009-05-13 | PDF 338.7 KB |
| Test report | Test Report | 2009-05-13 | PDF 1.2 MB |
| Attestation letter | Cover Letter(s) | 2009-05-13 | PDF 12.5 KB |
| Agent authorization letter | Cover Letter(s) | 2009-05-13 | PDF 57.2 KB |
| C2PC letter | Cover Letter(s) | 2009-05-13 | PDF 28.5 KB |
| Confidentiality request letter | Cover Letter(s) | 2009-05-13 | PDF 28.7 KB |
| TCB Q and A | Cover Letter(s) | 2009-05-13 | PDF 133.3 KB |
| Authorization letter | Cover Letter(s) | 2009-04-27 | PDF 57.2 KB |
| Authorization letter from Broadcom | Cover Letter(s) | 2009-04-27 | PDF 528 KB |
| Multiple listing request letter | Cover Letter(s) | 2009-04-27 | PDF 28.3 KB |
| Antenna specification | Parts List/Tune Up Info | 2009-05-13 | PDF 1.2 MB |
| SAR Dipole calibration report | RF Exposure Info | 2009-05-13 | PDF 1.6 MB |
| SAR probe calibration report | RF Exposure Info | 2009-05-13 | PDF 1.4 MB |
| SAR test plots | RF Exposure Info | 2009-05-13 | PDF 240.5 KB |
Application Information
| Application ID | 3BidVhj2ISEuQ/Y8TMvKVQ== |
|---|---|
| Final Action Date | 2009-05-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020269494 |
| Model | -BCM94312MCG |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11g Wireless LAN PCI-E Mini Card |
| Responsible Party | Joyce Ting, Senior RF Regulatory Compliance Engineer, joyce_ting@compal.com , 886-2-8797-8599 |
| Test Firm | Kurt Chen, Compliance Certification Services Inc., kurt.chen@ccsrf.com  , 886-3-3240332 |
| TCB Email | mike.kuo@ccsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add a portable configuration in a specific laptop PC as documented in this filing. Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR value as documented in this filing is 0.0064 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 3BidVhj2ISEuQ/Y8TMvKVQ== | 2009-05-13 | Class II permissive change or modification of presently authorized equipment |
| OC0pzJHHnMeK/5w7kLcekQ== | 2009-04-27 | Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1028 Grant Date: 07/28/2007 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1790000 | 15C |
Grants
TCB Grant - Application OC0pzJHHnMeK/5w7kLcekQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/27/2009 Application Dated: 04/27/2009 |
| Compal Electronics Inc |
| No.581, Ruiguang Rd., Neihu District, |
| Taipei,, 11492 Taiwan |
| Attention: Joyce Ting , Senior RF Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | GKR-BCM94312MCG |
| Name of Grantee: | Compal Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g Wireless LAN PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.179 |
| Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application OC0pzJHHnMeK/5w7kLcekQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Compal Electronics Inc No.581, Ruiguang Rd., Neihu District, Taipei,, 11492 Taiwan |
Date of Grant: 04/27/2009 Application Dated: 04/27/2009 |
| Attention: Joyce Ting , Senior RF Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | GKR-BCM94312MCG |
| Name of Grantee: | Compal Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g Wireless LAN PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.179 |
| Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/13/2009 Application Dated: 05/10/2009 |
| Compal Electronics Inc |
| No.581, Ruiguang Rd., Neihu District, |
| Taipei,, 11492 Taiwan |
| Attention: Joyce Ting , Senior RF Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | GKR-BCM94312MCG |
| Name of Grantee: | Compal Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g Wireless LAN PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.179 |
| Class II Permissive Change to add a portable configuration in a specific laptop PC as documented in this filing. Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR value as documented in this filing is 0.0064 W/kg. |
EAS Grant - Application 3BidVhj2ISEuQ/Y8TMvKVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Compal Electronics Inc No.581, Ruiguang Rd., Neihu District, Taipei,, 11492 Taiwan |
Date of Grant: 05/13/2009 Application Dated: 05/10/2009 |
| Attention: Joyce Ting , Senior RF Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | GKR-BCM94312MCG |
| Name of Grantee: | Compal Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11g Wireless LAN PCI-E Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.179 |
| Class II Permissive Change to add a portable configuration in a specific laptop PC as documented in this filing. Modular Approval. Output power listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Highest measured body SAR value as documented in this filing is 0.0064 W/kg. |
| Mail To: |