FCC ID GKR-PICONODE
RPMA module
by Compal Electronics Inc
Grantee Code: GKR Product Code: PICONODE
Latest application date: 2020-10-15
FCC ID Device Details
| FCC ID | GKR-PICONODE |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | GKR |
| Product Code | PICONODE |
| Applicant Business | Compal Electronics Inc 🇹🇼 |
| Related Domains |  compal.com  sgs.com |
| Equipment Class | RPMA module |
| Test Firm | Compliance Certification Services Inc. Wugu Lab. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2475.63 MHz | Class II permissive change or modification of presently authorized equipment | 2020-10-15 |
| 2402-2475.63 MHz | Original Equipment | 2018-01-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2018-07-30 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2021-04-13 | PDF 140.7 KB |
| Internal photos | Internal Photos | 2018-07-30 | PDF 273.9 KB |
| External Photos | External Photos | 2021-04-13 | PDF 933.8 KB |
| External photos | External Photos | 2018-07-30 | PDF 192.7 KB |
| Label location | ID Label/Location Info | 2018-01-31 | PDF 849.1 KB |
| Test Setup Photos | Test Setup Photos | 2021-04-13 | PDF 1.1 MB |
| Setup photos | Test Setup Photos | 2018-07-30 | PDF 309.4 KB |
| Test Report MPE | Test Report | 2020-10-15 | PDF 299.4 KB |
| Test Report RPMA | Test Report | 2020-10-15 | PDF 1.4 MB |
| MPE report | Test Report | 2018-01-31 | PDF 156.6 KB |
| TR | Test Report | 2018-01-31 | PDF 1.4 MB |
| Agent Authorization Letter | Cover Letter(s) | 2020-10-15 | PDF 22.3 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2020-10-15 | PDF 18.8 KB |
| Agent letter | Cover Letter(s) | 2018-01-31 | PDF 19.2 KB |
| Confidentiality letter | Cover Letter(s) | 2018-01-31 | PDF 21.5 KB |
| DoC letter | Cover Letter(s) | 2018-01-31 | PDF 13.6 KB |
| Modular approval letter | Cover Letter(s) | 2018-01-31 | PDF 34.3 KB |
| Block diagram Metadata only | Block Diagram | PDF 248 KB | |
| Schematic Metadata only | Schematics | PDF 452.7 KB | |
| Operational Description Metadata only | Operational Description | PDF 85.9 KB | |
| Operational Description Antenna Spec 1 Metadata only | Operational Description | PDF 32.1 KB | |
| Operational Description Antenna Spec 2 Metadata only | Operational Description | PDF 1.8 MB | |
| Operational Description Antenna Spec 3 Metadata only | Operational Description | PDF 827 KB | |
| Operational Description Antenna Spec 4 Metadata only | Operational Description | PDF 165.3 KB | |
| Operational Description Antenna Spec 5 Metadata only | Operational Description | PDF 1.7 MB | |
| Operational Description Antenna Spec 6 Metadata only | Operational Description | PDF 2.2 MB | |
| Operational description Metadata only | Operational Description | PDF 10.2 KB |
Application Information
| Application ID | CDeo43qAHda5MPZX682nWg== |
|---|---|
| Final Action Date | 2020-10-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020269494 |
| Model | PICONODE |
| Frequency Range | 2402-2475.63 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | RPMA module |
| Responsible Party | Joyce Ting, Senior RF Regulatory Compliance Engineer, joyce_ting@compal.com , 886-2-8797-8599 |
| Agent | Kevin Kevin Kevin, Compliance Certification Services Inc. Wugu Lab., kevin.tsai@sgs.com , 886-2-2299-9720 |
| Technical Contact | Allison Chen, Compliance Certification Services Inc. Wugu Lab, chen.allison@sgs.com , 886-2-2299-9720 |
| Non-Technical Contact | Allison Chen, Compliance Certification Services Inc. Wugu Lab, chen.allison@sgs.com , 886-2-2299-9720 |
| Test Firm | Hank Lee, Compliance Certification Services Inc. Wugu Lab., hank.lee@sgs.com , 886-2-2299-9720 |
| TCB Email | uscts.tcb@sgs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/13/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in configuration with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. This permissive change is to request approval for additional antenna pairs to be used with the transmitter. Molex, 146153-0150; Laird, MAF94264; Ethertronics, 1001013; Taiyo Yuden, AH104F2450S1; Linx/Antenna Factor, ANT-2.4-USP and Jesoncom, 101010D. All Antenna(s) are lower gain from original approval. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| CDeo43qAHda5MPZX682nWg== | 2020-10-15 | Class II permissive change or modification of presently authorized equipment |
| EFoinFuOvw98QT3/adnqPg== | 2018-01-31 | Original Equipment |
Grants
TCB Grant - Application EFoinFuOvw98QT3/adnqPg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 01/31/2018 Application Dated: 01/31/2018 |
| Compal Electronics Inc |
| No.581 & 581-1, Ruiguang Rd., Neihu District, |
| Taipei city,, 11492 Taiwan |
| Attention: Joyce Ting , Senior RF Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | GKR-PICONODE |
| Name of Grantee: | Compal Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | RPMA module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2475.63 | 0.232 |
| Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. |
EAS Grant - Application EFoinFuOvw98QT3/adnqPg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Compal Electronics Inc No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei city,, 11492 Taiwan |
Date of Grant: 01/31/2018 Application Dated: 01/31/2018 |
| Attention: Joyce Ting , Senior RF Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | GKR-PICONODE |
| Name of Grantee: | Compal Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | RPMA module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2475.63 | 0.232 |
| Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 10/15/2020 Application Dated: 10/15/2020 |
| Compal Electronics Inc |
| No.581 & 581-1, Ruiguang Rd., Neihu District, |
| Taipei city,, 11492 Taiwan |
| Attention: Joyce Ting , Senior RF Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | GKR-PICONODE |
| Name of Grantee: | Compal Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | RPMA module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2475.63 | 0.2138 |
| Power output listed is conducted. Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in configuration with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. This permissive change is to request approval for additional antenna pairs to be used with the transmitter. Molex, 146153-0150; Laird, MAF94264; Ethertronics, 1001013; Taiyo Yuden, AH104F2450S1; Linx/Antenna Factor, ANT-2.4-USP and Jesoncom, 101010D. All Antenna(s) are lower gain from original approval. |
EAS Grant - Application CDeo43qAHda5MPZX682nWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Compal Electronics Inc No.581 & 581-1, Ruiguang Rd., Neihu District, Taipei city,, 11492 Taiwan |
Date of Grant: 10/15/2020 Application Dated: 10/15/2020 |
| Attention: Joyce Ting , Senior RF Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | GKR-PICONODE |
| Name of Grantee: | Compal Electronics Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | RPMA module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2475.63 | 0.2138 |
| Power output listed is conducted. Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in configuration with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or less gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. This permissive change is to request approval for additional antenna pairs to be used with the transmitter. Molex, 146153-0150; Laird, MAF94264; Ethertronics, 1001013; Taiyo Yuden, AH104F2450S1; Linx/Antenna Factor, ANT-2.4-USP and Jesoncom, 101010D. All Antenna(s) are lower gain from original approval. |
| Mail To: |