1. FCC ID
  2. H6M
  3. H6M-SB800

FCC ID H6M-SB800

In-Hancer Plus Bi-Directional Amplifier

by Powerwave Technologies Inc.

Grantee Code: H6M   Product Code: SB800
Latest application date: 2003-10-24

FCC ID Device Details

FCC IDH6M-SB800
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeH6M
Product CodeSB800
Applicant BusinessPowerwave Technologies Inc. 🇺🇸
Related Domains pwav.com
Equipment ClassIn-Hancer Plus Bi-Directional Amplifier
Test FirmUltraTech Engineering Labs Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
806-824 MHzOriginal Equipment2003-10-24

Exhibits

DocumentTypeAvailableFile
users manualUsers Manual2003-10-24PDF 1.1 MB
internal photosInternal Photos2003-10-24PDF 1.1 MB
external photosExternal Photos2003-10-24PDF 106.5 KB
label locationID Label/Location Info2003-10-24PDF 117.1 KB
label sampleID Label/Location Info2003-10-24PDF 47.9 KB
operational descriptionOperational Description2003-10-24PDF 481.7 KB
test report 1Test Report2003-10-24PDF 2.8 MB
test report 2Test Report2003-10-24PDF 2.4 MB
request for confidentialityCover Letter(s)2003-10-24PDF 77.4 KB
parts list 1Parts List/Tune Up Info2003-10-24PDF 217.2 KB
parts list 2Parts List/Tune Up Info2003-10-24PDF 511.8 KB
rf exposure infoRF Exposure Info2003-10-24PDF 26 KB
tune up infoParts List/Tune Up Info2003-10-24PDF 219.1 KB
schematics 1 Metadata onlySchematicsPDF 217.2 KB
schematics 2 Metadata onlySchematicsPDF 511.8 KB

Application Information

Application ID/o+KglsrjonIMFJIo0gmJQ==
Final Action Date2003-10-24
Application PurposeOriginal Equipment
Applicant FRN0003781366
ModelSB800
Frequency Range806-824 MHz
Equipment ClassAMP - Amplifier
Device DescriptionIn-Hancer Plus Bi-Directional Amplifier
Responsible PartyRobert Biedka, Sr. Quality Engineer, rbiedka@pwav.com , 714-466-1476
Test FirmTri Luu, UltraTech Engineering Labs Inc., tri@ultratech-labs.com , 877-747-6381
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsExtender. Output power is composite for multi-channel operation. Mobile grant conditions (Indoor): The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Fixed grant conditions (Outdoor): The antenna used for this transmitter(s) must be fixed-mounted on outdoor permanent structures. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
/o+KglsrjonIMFJIo0gmJQ==2003-10-24Original Equipment

Equipment Authorization

FrequencyOutputEmissionRules
806-824 MHz3.8F3E9
824-849 MHz0.5F1D22
824-849 MHz0.5F3E22
824-849 MHz0.5F9W22
824-849 MHz0.5GXW22
824-849 MHz0.5DXW22
851-869 MHz4.6F1D9
851-869 MHz4.6F3E9
869-894 MHz0.5F1D22
869-894 MHz0.5F3E22
869-894 MHz0.5F9W22
869-894 MHz0.5GXW22
869-894 MHz0.5DXW22
896-902 MHz3.9F1D9
896-902 MHz3.9F3E9
928-941 MHz5.5F1D9
928-941 MHz5.5F3E9

Grants

TCB Grant - Application /o+KglsrjonIMFJIo0gmJQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 10/24/2003

Application Dated: 10/24/2003
Powerwave Technologies Inc.
1801 E St Andrew Pl
Santa Ana, CA 92705
 
Attention: Robert Biedka , Sr. Quality Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H6M-SB800
Name of Grantee:  Powerwave Technologies Inc.
Equipment Class: Amplifier
Notes: In-Hancer Plus Bi-Directional Amplifier
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90 806.0  -  824.0 3.8   F1D
90 806.0  -  824.0 3.8   F3E
22 824.0  -  849.0 0.5   F1D
22 824.0  -  849.0 0.5   F3E
22 824.0  -  849.0 0.5   F9W
22 824.0  -  849.0 0.5   GXW
22 824.0  -  849.0 0.5   DXW
90 851.0  -  869.0 4.6   F1D
90 851.0  -  869.0 4.6   F3E
22 869.0  -  894.0 0.5   F1D
22 869.0  -  894.0 0.5   F3E
22 869.0  -  894.0 0.5   F9W
22 869.0  -  894.0 0.5   GXW
22 869.0  -  894.0 0.5   DXW
90 896.0  -  902.0 3.9   F1D
90 896.0  -  902.0 3.9   F3E
90 928.0  -  941.0 5.5   F1D
90 928.0  -  941.0 5.5   F3E

Extender. Output power is composite for multi-channel operation. Mobile grant conditions (Indoor): The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Fixed grant conditions (Outdoor): The antenna used for this transmitter(s) must be fixed-mounted on outdoor permanent structures. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application /o+KglsrjonIMFJIo0gmJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Powerwave Technologies Inc.
1801 E St Andrew Pl
Santa Ana, CA 92705
United States 		  Date of Grant: 10/24/2003

Application Dated: 10/24/2003
 
Attention: Robert Biedka , Sr. Quality Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H6M-SB800
Name of Grantee:  Powerwave Technologies Inc.
Equipment Class: Amplifier
Notes: In-Hancer Plus Bi-Directional Amplifier
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90 806.0  -  824.0 3.8   F1D
90 806.0  -  824.0 3.8   F3E
22 824.0  -  849.0 0.5   F1D
22 824.0  -  849.0 0.5   F3E
22 824.0  -  849.0 0.5   F9W
22 824.0  -  849.0 0.5   GXW
22 824.0  -  849.0 0.5   DXW
90 851.0  -  869.0 4.6   F1D
90 851.0  -  869.0 4.6   F3E
22 869.0  -  894.0 0.5   F1D
22 869.0  -  894.0 0.5   F3E
22 869.0  -  894.0 0.5   F9W
22 869.0  -  894.0 0.5   GXW
22 869.0  -  894.0 0.5   DXW
90 896.0  -  902.0 3.9   F1D
90 896.0  -  902.0 3.9   F3E
90 928.0  -  941.0 5.5   F1D
90 928.0  -  941.0 5.5   F3E

Extender. Output power is composite for multi-channel operation. Mobile grant conditions (Indoor): The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Fixed grant conditions (Outdoor): The antenna used for this transmitter(s) must be fixed-mounted on outdoor permanent structures. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: