FCC ID H8N-WLL013

USB Wireless Lan Card

by Askey Computer Corp

Grantee Code: H8N   Product Code: WLL013
Latest application date: 2002-08-05

FCC ID Device Details

FCC IDH8N-WLL013
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeH8N
Product CodeWLL013
Applicant BusinessAskey Computer Corp 🇹🇼
Related Domains askey.com
Equipment ClassUSB Wireless Lan Card
Test FirmDEKRA Testing and Certification Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2002-08-05
2412-2462 MHzOriginal Equipment2001-08-14

Exhibits

DocumentTypeAvailableFile
users manualUsers Manual2001-08-14PDF 778.3 KB
internal photosInternal Photos2002-08-05PDF 592.3 KB
internal photosInternal Photos2001-08-14PDF 870.7 KB
external photosExternal Photos2001-08-14PDF 141.2 KB
label locationID Label/Location Info2001-08-14PDF 74.6 KB
label sampleID Label/Location Info2001-08-14PDF 9.8 KB
block diagramBlock Diagram2001-08-14PDF 48.9 KB
operational descriptionOperational Description2002-08-05PDF 19.5 KB
operational descriptionOperational Description2001-08-14PDF 4.6 KB
test setup photosTest Setup Photos2002-08-05PDF 293.7 KB
test setup photosTest Setup Photos2001-08-14PDF 524.1 KB
test reportTest Report2002-08-05PDF 866.5 KB
test report 1Test Report2001-08-14PDF 638.3 KB
test report 2Test Report2001-08-14PDF 750.1 KB
test report 3Test Report2001-08-14PDF 533.1 KB
class II change letterCover Letter(s)2002-08-05PDF 124.4 KB
request for confidentialityCover Letter(s)2002-08-05PDF 204.2 KB
request for confidentialityCover Letter(s)2001-08-14PDF 48.8 KB
schematics Metadata onlySchematicsPDF 71.8 KB
schematics Metadata onlySchematicsPDF 74.2 KB

Application Information

Application IDMNJAz4N51bx7AAFbwE8hHQ==
Final Action Date2002-08-05
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0006923098
ModelWLL013
Frequency Range2412-2462 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionUSB Wireless Lan Card
Responsible PartyJack Po, Manager, jackpo@askey.com , 886 2 2228-7588
Test FirmSky Hsu, DEKRA Testing and Certification Co., Ltd., skyhsu@quietek.com , 886-2-86013788
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
MNJAz4N51bx7AAFbwE8hHQ==2002-08-05Class II permissive change or modification of presently authorized equipment
JgUg5Ve4EtokSk/ZBD2NoQ==2001-08-14Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.010000015C

Grants

TCB Grant - Application MNJAz4N51bx7AAFbwE8hHQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 08/05/2002

Application Dated: 08/05/2002
Askey Computer Corp
10F, No. 119, JIANKANG RD.
ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8N-WLL013
Name of Grantee:  Askey Computer Corp
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: USB Wireless Lan Card
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.01  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application MNJAz4N51bx7AAFbwE8hHQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Askey Computer Corp
10F, No. 119, JIANKANG RD. ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
  Date of Grant: 08/05/2002

Application Dated: 08/05/2002
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8N-WLL013
Name of Grantee:  Askey Computer Corp
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: USB Wireless Lan Card
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.01  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application JgUg5Ve4EtokSk/ZBD2NoQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 08/14/2001

Application Dated: 08/14/2001
Askey Computer Corp
10F, No. 119, JIANKANG RD.
ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8N-WLL013
Name of Grantee:  Askey Computer Corp
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Lan Card
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.01  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application JgUg5Ve4EtokSk/ZBD2NoQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Askey Computer Corp
10F, No. 119, JIANKANG RD. ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
  Date of Grant: 08/14/2001

Application Dated: 08/14/2001
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8N-WLL013
Name of Grantee:  Askey Computer Corp
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Lan Card
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.01  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: