FCC ID H8N-WLL3090
802.11b/g Mini PCI Card
by Askey Computer Corp
Grantee Code: H8N Product Code: WLL3090
Latest application date: 2005-12-23
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-12-23 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5BMB5 Grant Date: 10/13/2005 | 2005-11-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2005-12-23 | PDF 2.3 MB |
| External Photos | External Photos | 2005-12-23 | PDF 472.4 KB |
| External Photos | External Photos | 2005-11-07 | PDF 144 KB |
| ID Label Location Info | ID Label/Location Info | 2005-11-07 | PDF 221.7 KB |
| Test Setup Photos | Test Setup Photos | 2005-12-23 | PDF 206 KB |
| Test Report | Test Report | 2005-12-23 | PDF 1.2 MB |
| Agent letter | Cover Letter(s) | 2005-12-23 | PDF 1.4 MB |
| Class II permissive change letter | Cover Letter(s) | 2005-12-23 | PDF 677.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2005-12-23 | PDF 104.9 KB |
| Application Letter | Cover Letter(s) | 2005-11-07 | PDF 665.1 KB |
| Authorization Letter | Cover Letter(s) | 2005-11-07 | PDF 588.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 8 KB | |
| Schematics Metadata only | Schematics | PDF 77.5 KB | |
| Operation Description 2413 Metadata only | Operational Description | PDF 1,006.4 KB | |
| Operational Description 2414 Metadata only | Operational Description | PDF 1 MB | |
| Antenna Spec 10 Metadata only | Parts List/Tune Up Info | PDF 2.4 MB | |
| Antenna Spec 11 Metadata only | Parts List/Tune Up Info | PDF 2.4 MB | |
| Antenna Spec 12 Metadata only | Parts List/Tune Up Info | PDF 2.2 MB | |
| Antenna Spec 2 Metadata only | Parts List/Tune Up Info | PDF 2.3 MB | |
| Antenna Spec 3 Metadata only | Parts List/Tune Up Info | PDF 2.8 MB | |
| Antenna Spec 4a Metadata only | Parts List/Tune Up Info | PDF 979.7 KB | |
| Antenna Spec 4b Metadata only | Parts List/Tune Up Info | PDF 3.7 MB | |
| Antenna Spec 5 Metadata only | Parts List/Tune Up Info | PDF 2.8 MB | |
| Antenna Spec 6 Metadata only | Parts List/Tune Up Info | PDF 3.7 MB | |
| Antenna Spec 7 Metadata only | Parts List/Tune Up Info | PDF 2.4 MB | |
| Antenna Spec 8 Metadata only | Parts List/Tune Up Info | PDF 2.7 MB | |
| Antenna Spec 9 Metadata only | Parts List/Tune Up Info | PDF 2.8 MB | |
| Antenna spec 1 Metadata only | Parts List/Tune Up Info | PDF 2.9 MB |
Application Information
| Application ID | X/q6K0Ql3iPsm9STYzT1+Q== |
|---|---|
| Final Action Date | 2005-12-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006923098 |
| Model | WLL3090 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b/g Mini PCI Card |
| Responsible Party | Jack Po, Manager, jackpo@askey.com  , 886 2 2228-7588 |
| Test Firm | Kurt Chen, Compliance Certification Services Inc., kurt_chen@ccsemc.com.tw  , 886-2-86422071 |
| TCB Email | mike.kuo@ccsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change filing. Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| X/q6K0Ql3iPsm9STYzT1+Q== | 2005-12-23 | Class II permissive change or modification of presently authorized equipment |
| EsmPTI+MdT9MfIpILE4ixg== | 2005-11-07 | Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5BMB5 Grant Date: 10/13/2005 |
Grants
TCB Grant - Application X/q6K0Ql3iPsm9STYzT1+Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/23/2005 Application Dated: 12/23/2005 |
| Askey Computer Corp |
| 10F, No. 119, JIANKANG RD. |
| ZHONGHE DIST. |
| NEW TAIPEI CITY, 23585 Taiwan |
| Attention: Jack Po , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H8N-WLL3090 |
| Name of Grantee: | Askey Computer Corp |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Mini PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1977 |
| Class II permissive change filing. Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application X/q6K0Ql3iPsm9STYzT1+Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Askey Computer Corp 10F, No. 119, JIANKANG RD. ZHONGHE DIST. NEW TAIPEI CITY, 23585 Taiwan |
Date of Grant: 12/23/2005 Application Dated: 12/23/2005 |
| Attention: Jack Po , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H8N-WLL3090 |
| Name of Grantee: | Askey Computer Corp |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Mini PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1977 |
| Class II permissive change filing. Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/07/2005 Application Dated: 11/07/2005 |
| Askey Computer Corp |
| 10F, No. 119, JIANKANG RD. |
| ZHONGHE DIST. |
| NEW TAIPEI CITY, 23585 Taiwan |
| Attention: Jack Po , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H8N-WLL3090 |
| Name of Grantee: | Askey Computer Corp |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Mini PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.232 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application EsmPTI+MdT9MfIpILE4ixg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Askey Computer Corp 10F, No. 119, JIANKANG RD. ZHONGHE DIST. NEW TAIPEI CITY, 23585 Taiwan |
Date of Grant: 11/07/2005 Application Dated: 11/07/2005 |
| Attention: Jack Po , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H8N-WLL3090 |
| Name of Grantee: | Askey Computer Corp |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Mini PCI Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.232 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: |