FCC ID H8NWLL4030

Dual Band Mini-PCI Card

by Askey Computer Corp

Grantee Code: H8N   Product Code: WLL4030
Latest application date: 2004-12-17

FCC ID Device Details

FCC IDH8NWLL4030
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeH8N
Product CodeWLL4030
Applicant BusinessAskey Computer Corp 🇹🇼
Related Domains askey.com
Equipment ClassDual Band Mini-PCI Card
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5150-5250 MHzClass II permissive change or modification of presently authorized equipment2004-12-17
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2004-12-17
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2004-11-30
5150-5250 MHzClass II permissive change or modification of presently authorized equipment2004-11-30
5150-5250 MHzClass II permissive change or modification of presently authorized equipment2004-10-02
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2004-10-02
2412-2462 MHzOriginal Equipment2003-08-06
5150-5250 MHzOriginal Equipment2003-08-06

Exhibits

DocumentTypeAvailableFile
Manual Metadata onlyUsers Manual2003-08-06PDF 681.2 KB
Revised ManualUsers Manual2003-08-06PDF 767.2 KB
Internal PhotosInternal Photos2004-12-17PDF 424.1 KB
Internal photosInternal Photos2004-11-30PDF 388.6 KB
Internal photosInternal Photos2004-10-02PDF 301.4 KB
Internal PhotosInternal Photos2003-08-06PDF 821.9 KB
Internal PicsInternal Photos2003-08-06PDF 821.9 KB
External PhotosExternal Photos2004-12-17PDF 361.3 KB
External photosExternal Photos2004-11-30PDF 671.2 KB
Exteranl photos 2External Photos2004-10-02PDF 2.4 MB
External photos 1External Photos2004-10-02PDF 3 MB
External photos 2External Photos2004-10-02PDF 2.4 MB
External photos 3External Photos2004-10-02PDF 3.2 MB
External photso 3External Photos2004-10-02PDF 3.2 MB
External PhotosExternal Photos2003-08-06PDF 179.6 KB
External PicsExternal Photos2003-08-06PDF 179.6 KB
Label LocationID Label/Location Info2003-08-06PDF 112.7 KB
Label SampleID Label/Location Info2003-08-06PDF 123.4 KB
Operational DescriptionOperational Description2003-08-06PDF 8.8 KB
Test Setup PhotosTest Setup Photos2004-12-17PDF 618.5 KB
Set up photos revisedTest Setup Photos2004-11-30PDF 370.9 KB
Setup photosTest Setup Photos2004-11-30PDF 370.9 KB
Test setupTest Setup Photos2004-10-02PDF 1.1 MB
Test Setup PicsTest Setup Photos2003-08-06PDF 366.8 KB
Test Report Part 1Test Report2004-12-17PDF 2.2 MB
Test Report Part 2Test Report2004-12-17PDF 2.4 MB
Test Report Part 3Test Report2004-12-17PDF 2.5 MB
Test Report Part 4Test Report2004-12-17PDF 2 MB
Test Report Part 5Test Report2004-12-17PDF 1.6 MB
Test report 1 revisedTest Report2004-11-30PDF 3 MB
Test report 2 revisedTest Report2004-11-30PDF 3.4 MB
Test report 3 revisedTest Report2004-11-30PDF 1.8 MB
Test report 1Test Report2004-10-02PDF 2.3 MB
Test report 2Test Report2004-10-02PDF 3.6 MB
Test report 3Test Report2004-10-02PDF 3.6 MB
Test report 3Test Report2004-10-02PDF 2.5 MB
Part 1Test Report2003-08-06PDF 1.7 MB
Part 2Test Report2003-08-06PDF 2.2 MB
Part 3 RevisedTest Report2003-08-06PDF 2.4 MB
Part 4Test Report2003-08-06PDF 1.7 MB
Cover LetterCover Letter(s)2004-12-17PDF 53.1 KB
ATCB commentsCover Letter(s)2004-11-30PDF 42.9 KB
Email responseCover Letter(s)2004-11-30PDF 93.7 KB
Reason for PC2Cover Letter(s)2004-11-30PDF 58.5 KB
email response to ATCBCover Letter(s)2004-11-30PDF 93.7 KB
Reason for PC2Cover Letter(s)2004-10-02PDF 70.4 KB
Confid RequestCover Letter(s)2003-08-06PDF 23.7 KB
DofCCover Letter(s)2003-08-06PDF 36.6 KB
Modular RequestCover Letter(s)2003-08-06PDF 20.1 KB
POACover Letter(s)2003-08-06PDF 20.4 KB
RF Exposure CalculationRF Exposure Info2004-12-17PDF 42.1 KB
MPERF Exposure Info2004-11-30PDF 101.8 KB
MPERF Exposure Info2004-10-02PDF 117.6 KB
RF ExposureRF Exposure Info2003-08-06PDF 46.4 KB
RF Exposure InformationRF Exposure Info2003-08-06PDF 46.4 KB
Block Metadata onlyBlock DiagramPDF 21.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 21.2 KB
Schema Metadata onlySchematicsPDF 130.1 KB
Schematics Metadata onlySchematicsPDF 130.1 KB

Application Information

Application IDmc12vahG1+A+1AKHC90b+A==
Final Action Date2004-12-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0006923098
ModelWLL4030
Frequency Range5150-5250 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionDual Band Mini-PCI Card
Responsible PartyJack Po, Manager, jackpo@askey.com , 886 2 2228-7588
AgentEllis Ellis Ellis, Advance Data Technology Corporation, ellis@adt.com.tw , +886 3 318 3232
Technical ContactEllis Wu, Advance Data Technology Corporation, ellis@adt.com.tw , +886 3 318 3232
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-5935343
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must advise end user of the indoor use only restrictions of 15.407(e).

Applications

Application IDDatePurpose
mc12vahG1+A+1AKHC90b+A==2004-12-17Class II permissive change or modification of presently authorized equipment
4qX7AQse6EfebwijagIkkw==2004-12-17Class II permissive change or modification of presently authorized equipment
O/1jc0Am0i+GKDQNbxk8dQ==2004-11-30Class II permissive change or modification of presently authorized equipment
IKWi3TDVs2EnK8qgNRhfmQ==2004-11-30Class II permissive change or modification of presently authorized equipment
oLc50Yk/O300MMQYPp0gJQ==2004-10-02Class II permissive change or modification of presently authorized equipment
JB6J54Bg9iuUg37G6SYUuA==2004-10-02Class II permissive change or modification of presently authorized equipment
woply9udnGPLN2MqVH3kJA==2003-08-06Original Equipment
8Enf1azYI6qe/HN2pUKWmg==2003-08-06Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.044000015CCC
2412-2462 MHz0.044000015CCE
5150-5250 MHz0.03415ECE
5150-5250 MHz0.03415ECC
5250-5350 MHz0.04615ECE
5250-5350 MHz0.04615ECC
5250-5350 MHz0.04615E
5725-5825 MHz0.06915ECE
5725-5825 MHz0.06915ECC
5725-5825 MHz0.06915E

Grants

TCB Grant - Application woply9udnGPLN2MqVH3kJA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/06/2003

Application Dated: 08/06/2003
Askey Computer Corp
10F, No. 119, JIANKANG RD.
ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Digital Transmission System
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.044  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must satisfy the integral antenna requirements of 15.407(d) and advise end user of the indoor use only restrictions of 15.407(e).

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application woply9udnGPLN2MqVH3kJA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Askey Computer Corp
10F, No. 119, JIANKANG RD. ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
  Date of Grant: 08/06/2003

Application Dated: 08/06/2003
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Digital Transmission System
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.044  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must satisfy the integral antenna requirements of 15.407(d) and advise end user of the indoor use only restrictions of 15.407(e).


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application oLc50Yk/O300MMQYPp0gJQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/02/2004

Application Dated: 10/02/2004
Askey Computer Corp
10F, No. 119, JIANKANG RD.
ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5250.0 0.034  
CC 15E 5250.0  -  5350.0 0.046  
CC 15E 5725.0  -  5825.0 0.069  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must satisfy the integral antenna requirements of 15.407(d) and advise end user of the indoor use only restrictions of 15.407(e).

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application oLc50Yk/O300MMQYPp0gJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Askey Computer Corp
10F, No. 119, JIANKANG RD. ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
  Date of Grant: 10/02/2004

Application Dated: 10/02/2004
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5250.0 0.034  
CC 15E 5250.0  -  5350.0 0.046  
CC 15E 5725.0  -  5825.0 0.069  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must satisfy the integral antenna requirements of 15.407(d) and advise end user of the indoor use only restrictions of 15.407(e).


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application O/1jc0Am0i+GKDQNbxk8dQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/30/2004

Application Dated: 11/30/2004
Askey Computer Corp
10F, No. 119, JIANKANG RD.
ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Digital Transmission System
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.044  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application O/1jc0Am0i+GKDQNbxk8dQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Askey Computer Corp
10F, No. 119, JIANKANG RD. ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
  Date of Grant: 11/30/2004

Application Dated: 11/30/2004
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Digital Transmission System
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.044  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application mc12vahG1+A+1AKHC90b+A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 12/17/2004

Application Dated: 12/17/2004
Askey Computer Corp
10F, No. 119, JIANKANG RD.
ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5250.0 0.034  
15E 5250.0  -  5350.0 0.046  
15E 5725.0  -  5825.0 0.069  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must advise end user of the indoor use only restrictions of 15.407(e).

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application mc12vahG1+A+1AKHC90b+A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Askey Computer Corp
10F, No. 119, JIANKANG RD. ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
  Date of Grant: 12/17/2004

Application Dated: 12/17/2004
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5250.0 0.034  
15E 5250.0  -  5350.0 0.046  
15E 5725.0  -  5825.0 0.069  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must advise end user of the indoor use only restrictions of 15.407(e).


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application JB6J54Bg9iuUg37G6SYUuA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/02/2004

Application Dated: 10/02/2004
Askey Computer Corp
10F, No. 119, JIANKANG RD.
ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Digital Transmission System
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.044  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must satisfy the integral antenna requirements of 15.407(d) and advise end user of the indoor use only restrictions of 15.407(e).

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application JB6J54Bg9iuUg37G6SYUuA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Askey Computer Corp
10F, No. 119, JIANKANG RD. ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
  Date of Grant: 10/02/2004

Application Dated: 10/02/2004
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Digital Transmission System
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.044  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must satisfy the integral antenna requirements of 15.407(d) and advise end user of the indoor use only restrictions of 15.407(e).


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application IKWi3TDVs2EnK8qgNRhfmQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/30/2004

Application Dated: 11/30/2004
Askey Computer Corp
10F, No. 119, JIANKANG RD.
ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5250.0 0.034  
CC 15E 5250.0  -  5350.0 0.046  
CC 15E 5725.0  -  5825.0 0.069  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must advise end user of the indoor use only restrictions of 15.407(e).

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application IKWi3TDVs2EnK8qgNRhfmQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Askey Computer Corp
10F, No. 119, JIANKANG RD. ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
  Date of Grant: 11/30/2004

Application Dated: 11/30/2004
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5250.0 0.034  
CC 15E 5250.0  -  5350.0 0.046  
CC 15E 5725.0  -  5825.0 0.069  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must advise end user of the indoor use only restrictions of 15.407(e).


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8Enf1azYI6qe/HN2pUKWmg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 08/06/2003

Application Dated: 08/06/2003
Askey Computer Corp
10F, No. 119, JIANKANG RD.
ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15E 5150.0  -  5250.0 0.034  
CE 15E 5250.0  -  5350.0 0.046  
CE 15E 5725.0  -  5825.0 0.069  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM Integrators must satisfy the integral antenna requirements of 15.407(d) and advise the end user of the indoor restrictions of 15.407(e).

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application 8Enf1azYI6qe/HN2pUKWmg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Askey Computer Corp
10F, No. 119, JIANKANG RD. ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
  Date of Grant: 08/06/2003

Application Dated: 08/06/2003
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15E 5150.0  -  5250.0 0.034  
CE 15E 5250.0  -  5350.0 0.046  
CE 15E 5725.0  -  5825.0 0.069  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM Integrators must satisfy the integral antenna requirements of 15.407(d) and advise the end user of the indoor restrictions of 15.407(e).


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application 4qX7AQse6EfebwijagIkkw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 12/17/2004

Application Dated: 12/17/2004
Askey Computer Corp
10F, No. 119, JIANKANG RD.
ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Digital Transmission System
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.044  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 4qX7AQse6EfebwijagIkkw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Askey Computer Corp
10F, No. 119, JIANKANG RD. ZHONGHE DIST.
NEW TAIPEI CITY, 23585
Taiwan
  Date of Grant: 12/17/2004

Application Dated: 12/17/2004
 
Attention: Jack Po , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  H8NWLL4030
Name of Grantee:  Askey Computer Corp
Equipment Class: Digital Transmission System
Notes: Dual Band Mini-PCI Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.044  

Power Output listed is Conducted. Modular Approval restricted to OEM installation in configurations where the antenna is at least 20cm from all persons. The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which will integrate this module. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: