FCC ID H9P2164436
WLAN Module
by Symbol Technologies Inc
Grantee Code: H9P Product Code: 2164436
Latest application date: 2004-03-01
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-03-01 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-02-27 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-01-23 |
| 2412-2462 MHz | Original Equipment | 2003-11-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Information | Users Manual | 2004-03-01 | PDF 1.2 MB |
| User information | Users Manual | 2004-02-27 | PDF 327.6 KB |
| User information | Users Manual | 2004-01-23 | PDF 325.4 KB |
| Internal photos | Internal Photos | 2004-03-01 | PDF 1.3 MB |
| Internal photos | Internal Photos | 2004-02-27 | PDF 1 MB |
| Report photos internal | Internal Photos | 2003-11-26 | PDF 20 KB |
| External photos | External Photos | 2004-03-01 | PDF 445.6 KB |
| External photos | External Photos | 2004-02-27 | PDF 361.9 KB |
| Report photos external | External Photos | 2003-11-26 | PDF 20 KB |
| Label | ID Label/Location Info | 2004-01-23 | PDF 328.1 KB |
| Label placement | ID Label/Location Info | 2003-11-26 | PDF 621.4 KB |
| Label specification | ID Label/Location Info | 2003-11-26 | PDF 147.4 KB |
| Block diagram | Block Diagram | 2003-11-26 | PDF 189.4 KB |
| Report setup photos | Test Setup Photos | 2003-11-26 | PDF 19.9 KB |
| Test report | Test Report | 2004-03-01 | PDF 1.7 MB |
| Evaluation letter Metadata only | Test Report | 2004-02-27 | PDF 47.7 KB |
| Test report | Test Report | 2004-02-27 | PDF 1.9 MB |
| Evaluation letter Metadata only | Test Report | 2004-01-23 | PDF 178.6 KB |
| Test report | Test Report | 2004-01-23 | PDF 2.2 MB |
| Part 15 report | Test Report | 2003-11-26 | PDF 2.1 MB |
| Attestation letter | Attestation Statements | 2004-03-01 | PDF 30.8 KB |
| Attestation letter | Attestation Statements | 2004-02-27 | PDF 30.8 KB |
| Attestation letter | Attestation Statements | 2004-01-23 | PDF 22.8 KB |
| Agent letter | Cover Letter(s) | 2004-03-01 | PDF 34.9 KB |
| Application letter | Cover Letter(s) | 2004-03-01 | PDF 32.4 KB |
| Confidentiality | Cover Letter(s) | 2004-03-01 | PDF 40.1 KB |
| Evaluation | Cover Letter(s) | 2004-03-01 | PDF 19.7 KB |
| SAR evaluation letter | RF Exposure Info | 2004-03-01 | PDF 40.5 KB |
| Application letter | Cover Letter(s) | 2004-02-27 | PDF 32.9 KB |
| Evaluation letter | Cover Letter(s) | 2004-02-27 | PDF 19.7 KB |
| SAR evaluation letter | RF Exposure Info | 2004-02-27 | PDF 47.7 KB |
| Application letter | Cover Letter(s) | 2004-01-23 | PDF 31.8 KB |
| SAR evaluation letter | RF Exposure Info | 2004-01-23 | PDF 178.6 KB |
| Agent authorisation letter | Cover Letter(s) | 2003-11-26 | PDF 35.6 KB |
| Assessment Notes | Cover Letter(s) | 2003-11-26 | PDF 55.7 KB |
| Confidentiality letter | Cover Letter(s) | 2003-11-26 | PDF 23.1 KB |
| Modular approval request | Cover Letter(s) | 2003-11-26 | PDF 283.1 KB |
| Modular approval statement | Cover Letter(s) | 2003-11-26 | PDF 12.2 KB |
| SAR Assessment notes Metadata only | Cover Letter(s) | 2003-11-26 | PDF 48.7 KB |
| SAR report | RF Exposure Info | 2004-03-01 | PDF 1.7 MB |
| SAR report | RF Exposure Info | 2004-02-27 | PDF 1.9 MB |
| SAR report | RF Exposure Info | 2004-01-23 | PDF 2.2 MB |
| SAR report Metadata only | RF Exposure Info | 2003-11-26 | PDF 1.3 MB |
| Integration guide Metadata only | Users Manual | PDF 468.5 KB | |
| Assembly drawing Metadata only | Schematics | PDF 167 KB | |
| Exploded assembly Metadata only | Schematics | PDF 167 KB | |
| Gemini MTM schematics Metadata only | Schematics | PDF 431.1 KB | |
| PCB assembly Metadata only | Schematics | PDF 621.4 KB | |
| Schematics Metadata only | Schematics | PDF 531 KB | |
| Schematics Metadata only | Schematics | PDF 712.3 KB | |
| Schematics Metadata only | Schematics | PDF 671.9 KB | |
| Antenna Metadata only | Operational Description | PDF 135.6 KB | |
| Antenna description Metadata only | Operational Description | PDF 339.5 KB | |
| Operation Metadata only | Operational Description | PDF 878 KB | |
| Operation Metadata only | Operational Description | PDF 426.8 KB | |
| Parts list Metadata only | Parts List/Tune Up Info | PDF 474.7 KB |
Application Information
| Application ID | vTFLvCJ2gmSYiXbOia991w== |
|---|---|
| Final Action Date | 2004-03-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011209004 |
| Model | 2164436 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WLAN Module |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com  , 346-260-3543 |
| Test Firm | Jensen Adams, TUV SUD Product Service, jensen.adams@tuv-sud.co.uk  , 44-1489-558252 |
| TCB Email | hilton.carr@babt.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This is a Modular Approval. The maximum conducted power output is listed above. The only antennas approved for use with this module are those documented in the filing. This Modular Approval is limited to OEM installation only and the OEM integrators must be provided with, and must follow, the Grantees antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091. The module is approved for use in the Grantee’s MC9060 “short”, “Brick”, and “Gun” hosts. The maximum measured SAR level in the MC9060 “Gun ” host is 1.41 W/kg. The maximum measured SAR level in the MC9060 “brick ” host is 1.16 W/kg. The maximum measured SAR level in the MC9060 “short” host is 0.751 W/kg. To maintain SAR compliance for body-worn operating configurations only non-metallic belt clips / holsters which maintain a minimum distance of 1 cm between the device and body are permitted. The device is not approved for use with headsets except as documented in this filing. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The module must not be co-located or operated in conjunction with any other antenna or transmitter. This grant is valid only when the device is sold to OEM integrators and the OEM integrators must be instructed to ensure that the end users shall have no information on how to remove the device from its host equipment nor on how to use or install the device in another host. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vTFLvCJ2gmSYiXbOia991w== | 2004-03-01 | Class II permissive change or modification of presently authorized equipment |
| qzQxQrENKaBHw80AjoCzew== | 2004-02-27 | Class II permissive change or modification of presently authorized equipment |
| YJ9BRFCTJIzj8A/j1ZAkjA== | 2004-01-23 | Class II permissive change or modification of presently authorized equipment |
| XVJUxB6XUa9ZEIsqYp2lBw== | 2003-11-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application YJ9BRFCTJIzj8A/j1ZAkjA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 01/23/2004 Application Dated: 01/23/2004 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9P2164436 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.038 | 11M0F1D |
| This is a Modular Approval. The maximum conducted power output is listed above. The only antennas approved for use with this module are those documented in the filing. This Modular Approval is limited to OEM installation only and the OEM integrators must be provided with, and must follow, the Grantees antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091.The module is approved for use in the Grantee’s MC9060 “short” host. The maximum measured SAR level in the MC9060 “short” host is 0.751 W/kg. To maintain SAR compliance for body-worn operating configurations only non-metallic belt clips / holsters which maintain a minimum distance of 1 cm between the device and body are permitted. The device is not approved for use with headsets except as documented in this filing. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The module must not be co-located or operated in conjunction with any other antenna or transmitter. This grant is valid only when the device is sold to OEM integrators and the OEM integrators must be instructed to ensure that the end users shall have no information on how to remove the device from its host equipment nor on how to use or install the device in another host. |
EAS Grant - Application YJ9BRFCTJIzj8A/j1ZAkjA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 01/23/2004 Application Dated: 01/23/2004 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9P2164436 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.038 | 11M0F1D |
| This is a Modular Approval. The maximum conducted power output is listed above. The only antennas approved for use with this module are those documented in the filing. This Modular Approval is limited to OEM installation only and the OEM integrators must be provided with, and must follow, the Grantees antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091.The module is approved for use in the Grantee’s MC9060 “short” host. The maximum measured SAR level in the MC9060 “short” host is 0.751 W/kg. To maintain SAR compliance for body-worn operating configurations only non-metallic belt clips / holsters which maintain a minimum distance of 1 cm between the device and body are permitted. The device is not approved for use with headsets except as documented in this filing. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The module must not be co-located or operated in conjunction with any other antenna or transmitter. This grant is valid only when the device is sold to OEM integrators and the OEM integrators must be instructed to ensure that the end users shall have no information on how to remove the device from its host equipment nor on how to use or install the device in another host. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 11/26/2003 Application Dated: 11/26/2003 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9P2164436 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.038 | 11M0FID |
| Modular Approval. Power Output listed is conducted. The only antennas approved for use with this module are those documented in the file. Approval is limited to OEM installation only. The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091 and must not be co-located or operated in conjunction with any other antenna or transmitter not described in this application. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
EAS Grant - Application XVJUxB6XUa9ZEIsqYp2lBw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 11/26/2003 Application Dated: 11/26/2003 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9P2164436 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.038 | 11M0FID |
| Modular Approval. Power Output listed is conducted. The only antennas approved for use with this module are those documented in the file. Approval is limited to OEM installation only. The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091 and must not be co-located or operated in conjunction with any other antenna or transmitter not described in this application. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 03/01/2004 Application Dated: 03/01/2004 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9P2164436 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.038 | 11M0F1D |
| This is a Modular Approval. The maximum conducted power output is listed above. The only antennas approved for use with this module are those documented in the filing. This Modular Approval is limited to OEM installation only and the OEM integrators must be provided with, and must follow, the Grantees antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091. The module is approved for use in the Grantee’s MC9060 “short”, “Brick”, and “Gun” hosts. The maximum measured SAR level in the MC9060 “Gun ” host is 1.41 W/kg. The maximum measured SAR level in the MC9060 “brick ” host is 1.16 W/kg. The maximum measured SAR level in the MC9060 “short” host is 0.751 W/kg. To maintain SAR compliance for body-worn operating configurations only non-metallic belt clips / holsters which maintain a minimum distance of 1 cm between the device and body are permitted. The device is not approved for use with headsets except as documented in this filing. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The module must not be co-located or operated in conjunction with any other antenna or transmitter. This grant is valid only when the device is sold to OEM integrators and the OEM integrators must be instructed to ensure that the end users shall have no information on how to remove the device from its host equipment nor on how to use or install the device in another host. |
EAS Grant - Application vTFLvCJ2gmSYiXbOia991w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 03/01/2004 Application Dated: 03/01/2004 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9P2164436 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.038 | 11M0F1D |
| This is a Modular Approval. The maximum conducted power output is listed above. The only antennas approved for use with this module are those documented in the filing. This Modular Approval is limited to OEM installation only and the OEM integrators must be provided with, and must follow, the Grantees antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091. The module is approved for use in the Grantee’s MC9060 “short”, “Brick”, and “Gun” hosts. The maximum measured SAR level in the MC9060 “Gun ” host is 1.41 W/kg. The maximum measured SAR level in the MC9060 “brick ” host is 1.16 W/kg. The maximum measured SAR level in the MC9060 “short” host is 0.751 W/kg. To maintain SAR compliance for body-worn operating configurations only non-metallic belt clips / holsters which maintain a minimum distance of 1 cm between the device and body are permitted. The device is not approved for use with headsets except as documented in this filing. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The module must not be co-located or operated in conjunction with any other antenna or transmitter. This grant is valid only when the device is sold to OEM integrators and the OEM integrators must be instructed to ensure that the end users shall have no information on how to remove the device from its host equipment nor on how to use or install the device in another host. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 02/27/2004 Application Dated: 02/27/2004 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9P2164436 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.038 | 11M0F1D |
| This is a Modular Approval. The maximum conducted power output is listed above. The only antennas approved for use with this module are those documented in the filing. This Modular Approval is limited to OEM installation only and the OEM integrators must be provided with, and must follow, the Grantees antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091. The module is approved for use in the Grantee’s MC9060 “short” and “Brick” hosts. The maximum measured SAR level in the MC9060 “brick ” host is 1.16 W/kg. The maximum measured SAR level in the MC9060 “short” host is 0.751 W/kg. To maintain SAR compliance for body-worn operating configurations only non-metallic belt clips / holsters which maintain a minimum distance of 1 cm between the device and body are permitted. The device is not approved for use with headsets except as documented in this filing. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The module must not be co-located or operated in conjunction with any other antenna or transmitter. This grant is valid only when the device is sold to OEM integrators and the OEM integrators must be instructed to ensure that the end users shall have no information on how to remove the device from its host equipment nor on how to use or install the device in another host |
EAS Grant - Application qzQxQrENKaBHw80AjoCzew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 02/27/2004 Application Dated: 02/27/2004 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9P2164436 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.038 | 11M0F1D |
| This is a Modular Approval. The maximum conducted power output is listed above. The only antennas approved for use with this module are those documented in the filing. This Modular Approval is limited to OEM installation only and the OEM integrators must be provided with, and must follow, the Grantees antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Antenna and radiating surfaces used must be installed to provide a separation distance of at least 20 cm from all persons to satisfy the requirements of 2.1091. The module is approved for use in the Grantee’s MC9060 “short” and “Brick” hosts. The maximum measured SAR level in the MC9060 “brick ” host is 1.16 W/kg. The maximum measured SAR level in the MC9060 “short” host is 0.751 W/kg. To maintain SAR compliance for body-worn operating configurations only non-metallic belt clips / holsters which maintain a minimum distance of 1 cm between the device and body are permitted. The device is not approved for use with headsets except as documented in this filing. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The module must not be co-located or operated in conjunction with any other antenna or transmitter. This grant is valid only when the device is sold to OEM integrators and the OEM integrators must be instructed to ensure that the end users shall have no information on how to remove the device from its host equipment nor on how to use or install the device in another host |
| Mail To: |