FCC ID H9PCCRF5020
802.11b RF Port
by Symbol Technologies Inc
Grantee Code: H9P Product Code: CCRF5020
Latest application date: 2003-06-04
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-06-04 |
| 2412-2462 MHz | Original Equipment | 2002-06-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Hardware Installation Guide | Users Manual | 2002-06-11 | PDF 181.5 KB |
| User Manual Metadata only | Users Manual | 2002-06-11 | PDF 227.3 KB |
| Internal Photos | Internal Photos | 2003-06-04 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2002-06-11 | PDF 1.8 MB |
| External Photos | External Photos | 2003-06-04 | PDF 273.1 KB |
| External Photos | External Photos | 2002-06-11 | PDF 743.6 KB |
| FCC ID label format and location | ID Label/Location Info | 2002-06-11 | PDF 515.9 KB |
| Test Setup Photos | Test Setup Photos | 2003-06-04 | PDF 843 KB |
| Test Setup Photos | Test Setup Photos | 2002-06-11 | PDF 1.2 MB |
| Test Report 1 of 3 | Test Report | 2003-06-04 | PDF 3.2 MB |
| Test Report 2 of 3 | Test Report | 2003-06-04 | PDF 2.7 MB |
| Test Report 3 of 3 | Test Report | 2003-06-04 | PDF 2.4 MB |
| Test Report 1 of 2 | Test Report | 2002-06-11 | PDF 2 MB |
| Test Report 2 of 2 | Test Report | 2002-06-11 | PDF 3 MB |
| Class II permissive change cover letter | Cover Letter(s) | 2003-06-04 | PDF 187.8 KB |
| Request for confidentiality letter | Cover Letter(s) | 2003-06-04 | PDF 88.6 KB |
| TCB Q and A | Cover Letter(s) | 2003-06-04 | PDF 8 KB |
| Rquest for confidentiality letter | Cover Letter(s) | 2002-06-11 | PDF 79.6 KB |
| TCB Q and A | Cover Letter(s) | 2002-06-11 | PDF 3.5 KB |
| Antenna Specification | Parts List/Tune Up Info | 2003-06-04 | PDF 959.4 KB |
| MPE calculation | RF Exposure Info | 2002-06-11 | PDF 5.1 KB |
| RF exposure warning statement | RF Exposure Info | 2002-06-11 | PDF 115.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 146.2 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 147.8 KB | |
| Description of changes in relate to schemaic Metadata only | Schematics | PDF 90.3 KB | |
| Schematic Diagram Metadata only | Schematics | PDF 228.8 KB | |
| Updated schematic diagram Metadata only | Schematics | PDF 204.5 KB | |
| Operational Description Metadata only | Operational Description | PDF 190.1 KB |
Application Information
| Application ID | avlchE0IgPiCj6vek7reUA== |
|---|---|
| Final Action Date | 2003-06-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011209004 |
| Model | CCRF5020 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 802.11b RF Port |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com  , 346-260-3543 |
| Agent | Steve Steve Steve, Compliance Certification Services, scheng@ccsemc.com  , 408-463-0885 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Total of 12 antennas with 5 antenna types ( Yagi/Panel/Dish/Dipole/Patch ) are added in this Class II permissive change filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| avlchE0IgPiCj6vek7reUA== | 2003-06-04 | Class II permissive change or modification of presently authorized equipment |
| z9g+OnWoMnt4qNfpNwOpXQ== | 2002-06-11 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application z9g+OnWoMnt4qNfpNwOpXQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/11/2002 Application Dated: 06/11/2002 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PCCRF5020 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b RF Port |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0575 |
| The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application z9g+OnWoMnt4qNfpNwOpXQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 06/11/2002 Application Dated: 06/11/2002 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PCCRF5020 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b RF Port |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0575 |
| The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/04/2003 Application Dated: 06/04/2003 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PCCRF5020 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b RF Port |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 05 36 | 15C | 2412.0 - 2462.0 | 0.0575 |
| Total of 12 antennas with 5 antenna types ( Yagi/Panel/Dish/Dipole/Patch ) are added in this Class II permissive change filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 05: | The manufacture and importation of this device must cease on July 10, 2005, pursuant to 15.37(j) or 18.123 transition provisions adopted under FCC 02-157 (ET Docket 98-80). |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application avlchE0IgPiCj6vek7reUA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 06/04/2003 Application Dated: 06/04/2003 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PCCRF5020 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b RF Port |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 05 36 | 15C | 2412.0 - 2462.0 | 0.0575 |
| Total of 12 antennas with 5 antenna types ( Yagi/Panel/Dish/Dipole/Patch ) are added in this Class II permissive change filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 05: | The manufacture and importation of this device must cease on July 10, 2005, pursuant to 15.37(j) or 18.123 transition provisions adopted under FCC 02-157 (ET Docket 98-80). |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: |