FCC ID H9PLA4131M
WLAN PC Card
by Symbol Technologies Inc
Grantee Code: H9P Product Code: LA4131M
Latest application date: 2003-07-08
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-07-08 |
| 2412-2462 MHz | Original Equipment | 2001-07-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2001-07-25 | PDF 433 KB |
| Internal Photos | Internal Photos | 2001-07-25 | PDF 1.2 MB |
| External Photos | External Photos | 2001-07-25 | PDF 657.4 KB |
| FCC ID label format and location | ID Label/Location Info | 2001-07-25 | PDF 790.9 KB |
| Test Setup Photos | Test Setup Photos | 2003-07-08 | PDF 528.9 KB |
| Test Setup Photos | Test Setup Photos | 2001-07-25 | PDF 1.6 MB |
| Test Report 1 of 2 | Test Report | 2003-07-08 | PDF 3.6 MB |
| Test Report 2 of 2 | Test Report | 2003-07-08 | PDF 3.4 MB |
| Duty Cycle | Test Report | 2001-07-25 | PDF 13.3 KB |
| MPE calculation | Test Report | 2001-07-25 | PDF 4.2 KB |
| Processing gain | Test Report | 2001-07-25 | PDF 55.3 KB |
| Test Report | Test Report | 2001-07-25 | PDF 2.9 MB |
| Antenna specification | Cover Letter(s) | 2003-07-08 | PDF 108 KB |
| Class II permissive change cover letter | Cover Letter(s) | 2003-07-08 | PDF 632.7 KB |
| TCB Q and A | Cover Letter(s) | 2001-07-25 | PDF 8.3 KB |
| TCB RF Exposure review statement | Cover Letter(s) | 2001-07-25 | PDF 26.5 KB |
| Antenna installation and MPE | RF Exposure Info | 2001-07-25 | PDF 1.8 MB |
| Block Diagram Metadata only | Block Diagram | PDF 16 KB | |
| Schematic Diagram Metadata only | Schematics | PDF 459.7 KB | |
| Theory of operation Metadata only | Operational Description | PDF 229.9 KB |
Application Information
| Application ID | G+RDBo9go50Onq/aYEcYlA== |
|---|---|
| Final Action Date | 2003-07-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011209004 |
| Model | LA4131M |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WLAN PC Card |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com  , 346-260-3543 |
| Agent | Steve Steve Steve, Compliance Certification Services, scheng@ccsemc.com  , 408-463-0885 |
| Test Firm | Steve Cheng, Compliance Certification Services Inc, scheng@ccsemc.com , 408-463-0885 |
| TCB Email | mkuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. In this Class II permissive change filing, 12 fixedmounted antennas with five types ( Panel/Dipole/Patch/Dish/Yagi) are added. For point-to-multipoint operation, the antenna(s) must be installed to provie a separation distance of at least 20cm from all persons. For point-to-point operation, the antenna must be professionally installed and provided at least 2 meter separation distance from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| G+RDBo9go50Onq/aYEcYlA== | 2003-07-08 | Class II permissive change or modification of presently authorized equipment |
| DnXSgLg8HuGFX/SHSHbQOw== | 2001-07-25 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application G+RDBo9go50Onq/aYEcYlA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/08/2003 Application Dated: 07/08/2003 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4131M |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN PC Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 05 36 | 15C | 2412.0 - 2462.0 | 0.06 |
| Output power listed is conducted. In this Class II permissive change filing, 12 fixedmounted antennas with five types ( Panel/Dipole/Patch/Dish/Yagi) are added. For point-to-multipoint operation, the antenna(s) must be installed to provie a separation distance of at least 20cm from all persons. For point-to-point operation, the antenna must be professionally installed and provided at least 2 meter separation distance from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 05: | The manufacture and importation of this device must cease on July 10, 2005, pursuant to 15.37(j) or 18.123 transition provisions adopted under FCC 02-157 (ET Docket 98-80). |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application G+RDBo9go50Onq/aYEcYlA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 07/08/2003 Application Dated: 07/08/2003 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4131M |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN PC Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 05 36 | 15C | 2412.0 - 2462.0 | 0.06 |
| Output power listed is conducted. In this Class II permissive change filing, 12 fixedmounted antennas with five types ( Panel/Dipole/Patch/Dish/Yagi) are added. For point-to-multipoint operation, the antenna(s) must be installed to provie a separation distance of at least 20cm from all persons. For point-to-point operation, the antenna must be professionally installed and provided at least 2 meter separation distance from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| 05: | The manufacture and importation of this device must cease on July 10, 2005, pursuant to 15.37(j) or 18.123 transition provisions adopted under FCC 02-157 (ET Docket 98-80). |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 07/25/2001 Application Dated: 07/25/2001 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4131M |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN PC Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.06 |
| Grant Conditions – Output is peak conducted. This device has five antenna configurations, as described in the filing. All five antennas can only be used for fixed configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time- averaging duty factor not exceeding 71.8%. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application DnXSgLg8HuGFX/SHSHbQOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 07/25/2001 Application Dated: 07/25/2001 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4131M |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN PC Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.06 |
| Grant Conditions – Output is peak conducted. This device has five antenna configurations, as described in the filing. All five antennas can only be used for fixed configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. This device must transmit with a source-based time- averaging duty factor not exceeding 71.8%. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |