FCC ID H9PLA4137
WLAN COMPACT FLASH CARD
by Symbol Technologies Inc
Grantee Code: H9P Product Code: LA4137
Latest application date: 2005-12-21
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-12-21 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-12-16 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-10-26 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-05-25 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-11-17 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-08-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2003-04-11 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2002-07-12 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2002-07-01 |
| 2412-2462 MHz | Original Equipment | 2002-05-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| PS3050 Quick Reference | Users Manual | 2003-11-17 | PDF 191.2 KB |
| Quick start guide poster | Users Manual | 2003-08-22 | PDF 1.2 MB |
| SAR Statement | Users Manual | 2003-08-22 | PDF 50.1 KB |
| quick reference guide MC9XXX | Users Manual | 2003-08-22 | PDF 257.8 KB |
| Users Manual | Users Manual | 2003-04-11 | PDF 1.3 MB |
| Users Manual 1 | Users Manual | 2002-07-12 | PDF 3.2 MB |
| Users Manual 2 | Users Manual | 2002-07-12 | PDF 1.7 MB |
| Users Manual 3 | Users Manual | 2002-07-12 | PDF 3.5 MB |
| Integration Guide Metadata only | Users Manual | 2002-05-06 | PDF 1.6 MB |
| LA4137 Users Manual | Users Manual | 2002-05-06 | PDF 899.1 KB |
| Users Manual Metadata only | Users Manual | 2002-05-06 | PDF 71 KB |
| INTERNAL PHOTOS | Internal Photos | 2005-12-21 | PDF 54 KB |
| INTERNAL PHOTOS | Internal Photos | 2005-12-16 | PDF 54.3 KB |
| Internal Photos | Internal Photos | 2005-10-26 | PDF 2 MB |
| Internal Photos | Internal Photos | 2005-05-25 | PDF 1.2 MB |
| Reference to test report | Internal Photos | 2003-08-22 | PDF 19.1 KB |
| EUT Internal Photographs | Internal Photos | 2002-07-12 | PDF 2.5 MB |
| LA4137 Antenna Report | Internal Photos | 2002-05-06 | PDF 119.4 KB |
| LA4137 Internal Photos(Compact package ONLY) NOT PCMCIA | Internal Photos | 2002-05-06 | PDF 999.2 KB |
| Photographs Internal Metadata only | Internal Photos | 2002-05-06 | PDF 1.5 MB |
| EUT Internal Photographs Metadata only | Internal Photos | PDF 2.5 MB | |
| EXTERNAL PHOTOS | External Photos | 2005-12-21 | PDF 59.6 KB |
| EXTERNAL PHOTOS | External Photos | 2005-12-16 | PDF 53.5 KB |
| External Photos 1 of 2 | External Photos | 2005-10-26 | PDF 2.4 MB |
| External Photos 2 of 2 | External Photos | 2005-10-26 | PDF 3.2 MB |
| Reference to Test Report | External Photos | 2003-11-17 | PDF 19.8 KB |
| Reference to test report | External Photos | 2003-08-22 | PDF 19.3 KB |
| External Photos | External Photos | 2003-04-11 | PDF 1 MB |
| Antenna Photographs | External Photos | 2002-07-12 | PDF 1.2 MB |
| EUT External Photographs | External Photos | 2002-07-12 | PDF 936.6 KB |
| INTEL Photos Metadata only | External Photos | 2002-05-06 | PDF 523.6 KB |
| LA4137 External Photos | External Photos | 2002-05-06 | PDF 562.8 KB |
| Photographs External( pcmcia not applied for) Metadata only | External Photos | 2002-05-06 | PDF 708.1 KB |
| Response to 22135 Photographs( pcmcia portion not applied for) | External Photos | 2002-05-06 | PDF 370.8 KB |
| EUT External Photographs Metadata only | External Photos | PDF 931.8 KB | |
| FCC ID label and location | ID Label/Location Info | 2005-10-26 | PDF 1.2 MB |
| FCC ID Label and Location | ID Label/Location Info | 2005-05-25 | PDF 658.6 KB |
| Label position | ID Label/Location Info | 2003-11-17 | PDF 14.7 KB |
| Product label | ID Label/Location Info | 2003-11-17 | PDF 113.5 KB |
| Label position | ID Label/Location Info | 2003-08-22 | PDF 46.5 KB |
| Product label | ID Label/Location Info | 2003-08-22 | PDF 52.8 KB |
| FCC ID Label and Location | ID Label/Location Info | 2002-07-12 | PDF 134.6 KB |
| Label External | ID Label/Location Info | 2002-07-12 | PDF 196.7 KB |
| Label Internal | ID Label/Location Info | 2002-07-12 | PDF 570.2 KB |
| Revised Label and Location | ID Label/Location Info | 2002-07-12 | PDF 131 KB |
| FCC ID Label and Location( pcmcia not applied for) Metadata only | ID Label/Location Info | 2002-05-06 | PDF 125.5 KB |
| INTEL Label Metadata only | ID Label/Location Info | 2002-05-06 | PDF 179.1 KB |
| LA4137 Label Metadata only | ID Label/Location Info | 2002-05-06 | PDF 276.7 KB |
| LA4137 Module Label | ID Label/Location Info | 2002-05-06 | PDF 1.8 MB |
| Photographs( pcmcia not applied for) Metadata only | ID Label/Location Info | 2002-05-06 | PDF 125.5 KB |
| Revised Regulatory Label Metadata only | ID Label/Location Info | 2002-05-06 | PDF 342.5 KB |
| FCC ID Label Location Metadata only | ID Label/Location Info | PDF 94.6 KB | |
| Antenna Info | Operational Description | 2005-10-26 | PDF 101 KB |
| Antena Info | Operational Description | 2003-08-22 | PDF 2.3 MB |
| Antenna info | Operational Description | 2003-08-22 | PDF 135.6 KB |
| SAR TEST SETUP PHOTOS | RF Exposure Info | 2005-12-16 | PDF 186.6 KB |
| Test Setup Photos | Test Setup Photos | 2005-10-26 | PDF 567.6 KB |
| Test Setup Photos | Test Setup Photos | 2005-05-25 | PDF 1.5 MB |
| Reference to Test Report | Test Setup Photos | 2003-11-17 | PDF 19.7 KB |
| Reference to test report | Test Setup Photos | 2003-08-22 | PDF 19.2 KB |
| Test Setup Photos | Test Setup Photos | 2003-04-11 | PDF 1.3 MB |
| Test SetUp Photographs | Test Setup Photos | 2002-07-12 | PDF 840.6 KB |
| Test Set up Photographs( pcmcia not applied for) | Test Setup Photos | 2002-05-06 | PDF 986.4 KB |
| Test SetUp Photographs Metadata only | Test Setup Photos | PDF 839.3 KB | |
| SAR TEST REPORTS | RF Exposure Info | 2005-12-21 | PDF 420.2 KB |
| Test Report | Test Report | 2005-10-26 | PDF 2.4 MB |
| Test Report | Test Report | 2005-05-25 | PDF 2.1 MB |
| PS3050 Part 15 Report | Test Report | 2003-11-17 | PDF 1.8 MB |
| SAR Assessment letter | Test Report | 2003-11-17 | PDF 39.8 KB |
| SAR Report WS611509 | Test Report | 2003-11-17 | PDF 2 MB |
| MC9050 OR611296 FCCPt 15 report | Test Report | 2003-08-22 | PDF 2.1 MB |
| Revised SAR Test Report | RF Exposure Info | 2003-08-22 | PDF 1.2 MB |
| SAR test report Metadata only | RF Exposure Info | 2003-08-22 | PDF 1.7 MB |
| Revised Test Report | Test Report | 2003-04-11 | PDF 1.1 MB |
| Test Report | Test Report | 2003-04-11 | PDF 1.1 MB |
| Test Report | Test Report | 2002-07-12 | PDF 1.2 MB |
| Antenna Report( pcmcia not applied for) Metadata only | Test Report | 2002-05-06 | PDF 133.1 KB |
| LA4137 EMC Test Report | Test Report | 2002-05-06 | PDF 3.1 MB |
| LA4137 SAR Test Report | RF Exposure Info | 2002-05-06 | PDF 2.4 MB |
| Processing Gain | Test Report | 2002-05-06 | PDF 53 KB |
| SAR Test Report Metadata only | RF Exposure Info | 2002-05-06 | PDF 486 KB |
| Test Report with Test Set up Photos( pcmcia not applied for) Metadata only | Test Report | 2002-05-06 | PDF 1.1 MB |
| Test Report Metadata only | Test Report | PDF 1.2 MB | |
| Attestation | Attestation Statements | 2003-11-17 | PDF 1 MB |
| Attestation statement | Attestation Statements | 2003-08-22 | PDF 1,022.4 KB |
| Attestation Statements | Attestation Statements | 2002-07-12 | PDF 130.6 KB |
| Confidentiality Letter | Attestation Statements | 2002-07-12 | PDF 18.5 KB |
| Declaration of Conformity | Attestation Statements | 2002-05-06 | PDF 478.1 KB |
| COVER LETTER | Cover Letter(s) | 2005-12-21 | PDF 15 KB |
| CLASS II CHANGE LETTER | Cover Letter(s) | 2005-12-16 | PDF 14.6 KB |
| COVER RESPONSE | Cover Letter(s) | 2005-12-16 | PDF 20.3 KB |
| Agent Authorization letter | Cover Letter(s) | 2005-10-26 | PDF 79.4 KB |
| Compliance Opinion | Cover Letter(s) | 2005-10-26 | PDF 15.8 KB |
| Cover letter | Cover Letter(s) | 2005-10-26 | PDF 76.6 KB |
| Letter of authorization from Symbol | Cover Letter(s) | 2005-10-26 | PDF 155.3 KB |
| Agent Authorization Letter | Cover Letter(s) | 2005-05-25 | PDF 79.4 KB |
| Compliance Opinion | Cover Letter(s) | 2005-05-25 | PDF 22.4 KB |
| Cover Letter from Agent | Cover Letter(s) | 2005-05-25 | PDF 7.8 KB |
| Letter of Authorization from Symbol | Cover Letter(s) | 2005-05-25 | PDF 155.3 KB |
| Agent authorisation letter | Cover Letter(s) | 2003-11-17 | PDF 35.6 KB |
| Confidentiality request | Cover Letter(s) | 2003-11-17 | PDF 2.8 MB |
| Evaluation letter | Cover Letter(s) | 2003-11-17 | PDF 44 KB |
| Permissive Change TCB Application | Cover Letter(s) | 2003-11-17 | PDF 51.6 KB |
| Assessment letter | Cover Letter(s) | 2003-08-22 | PDF 33.9 KB |
| Headset Option letter | Cover Letter(s) | 2003-08-22 | PDF 34.4 KB |
| Permissive Change letter | Cover Letter(s) | 2003-08-22 | PDF 39.3 KB |
| Revised SAR Assesment Letter | RF Exposure Info | 2003-08-22 | PDF 50.4 KB |
| SAR assessmemt letter Metadata only | RF Exposure Info | 2003-08-22 | PDF 54.3 KB |
| Cover Letter | Cover Letter(s) | 2003-04-11 | PDF 83.2 KB |
| Cover Letter | Cover Letter(s) | 2002-07-12 | PDF 99.2 KB |
| Cover Letter per CRN 23327 | Cover Letter(s) | 2002-07-12 | PDF 39.9 KB |
| Reponse to Correspondence 23315 | Cover Letter(s) | 2002-07-12 | PDF 80.2 KB |
| Responce Cover letter 23315 | Cover Letter(s) | 2002-07-12 | PDF 99.2 KB |
| Response to correspondence 23315 | Cover Letter(s) | 2002-07-12 | PDF 80.2 KB |
| Authorization to file for INTEL Metadata only | Cover Letter(s) | 2002-05-06 | PDF 89 KB |
| Confidentiality Letter | Cover Letter(s) | 2002-05-06 | PDF 276.4 KB |
| Correction to Desired FCC ID | Cover Letter(s) | 2002-05-06 | PDF 71.6 KB |
| Cover Letter Metadata only | Cover Letter(s) | 2002-05-06 | PDF 93.3 KB |
| Grant for INTEL Cover Letter Metadata only | Cover Letter(s) | 2002-05-06 | PDF 768.5 KB |
| LA4137 PERMISSIVE CHANGE COVER LETTER Metadata only | Cover Letter(s) | 2002-05-06 | PDF 138 KB |
| Request to file for INTEL Metadata only | Cover Letter(s) | 2002-05-06 | PDF 69.2 KB |
| Response to 22135 | Cover Letter(s) | 2002-05-06 | PDF 116.1 KB |
| Response to 22275 | Cover Letter(s) | 2002-05-06 | PDF 120.2 KB |
| Response to 22425 | Cover Letter(s) | 2002-05-06 | PDF 142.5 KB |
| Response to Correspondance 22425B | Cover Letter(s) | 2002-05-06 | PDF 109.9 KB |
| Cover Letter per CRN 23228 | Cover Letter(s) | PDF 25.8 KB | |
| DIPLOE CALIBRATION | RF Exposure Info | 2005-12-21 | PDF 348.6 KB |
| DIPOLE VALIDATION | RF Exposure Info | 2005-12-21 | PDF 306.8 KB |
| PROBE CALIBRATION | RF Exposure Info | 2005-12-21 | PDF 980.7 KB |
| SAR REPORT | RF Exposure Info | 2005-12-21 | PDF 356.2 KB |
| SAR TEST SET UP PHOTOS | RF Exposure Info | 2005-12-21 | PDF 190.6 KB |
| DIPOLE CALIBRATION | RF Exposure Info | 2005-12-16 | PDF 348.4 KB |
| DIPOLE VALIDATION | RF Exposure Info | 2005-12-16 | PDF 329.4 KB |
| PROBE CALIBRATIONS | RF Exposure Info | 2005-12-16 | PDF 889.9 KB |
| SAR REPORT | RF Exposure Info | 2005-12-16 | PDF 357.9 KB |
| SAR TEST DATA | RF Exposure Info | 2005-12-16 | PDF 448.8 KB |
| RF Exposure | RF Exposure Info | 2005-10-26 | PDF 38.9 KB |
| RF Exposure | RF Exposure Info | 2005-05-25 | PDF 21.7 KB |
| MPE Report | RF Exposure Info | 2003-04-11 | PDF 8.3 KB |
| Attachments per CRN 23327 | RF Exposure Info | 2002-07-12 | PDF 315.1 KB |
| Dipole Validation Plots | RF Exposure Info | 2002-07-12 | PDF 69.9 KB |
| Probe Calibration | RF Exposure Info | 2002-07-12 | PDF 184.2 KB |
| SAR Photographs | RF Exposure Info | 2002-07-12 | PDF 1.4 MB |
| SAR Plots | RF Exposure Info | 2002-07-12 | PDF 177.5 KB |
| SAR Report | RF Exposure Info | 2002-07-12 | PDF 721.3 KB |
| LA4137 Typos Corrected SAR Report | RF Exposure Info | 2002-05-06 | PDF 3.4 MB |
| RF Exposure Metadata only | RF Exposure Info | 2002-05-06 | PDF 566.5 KB |
| Response to 22377 Intigration Guide | RF Exposure Info | 2002-05-06 | PDF 225.5 KB |
| Response to Correspondence 22377 | RF Exposure Info | 2002-05-06 | PDF 126.7 KB |
| SAR Dipole Validation Metadata only | RF Exposure Info | 2002-05-06 | PDF 170.2 KB |
| SAR Probe Calibration Metadata only | RF Exposure Info | 2002-05-06 | PDF 186.5 KB |
| SAR Test Plots Metadata only | RF Exposure Info | 2002-05-06 | PDF 594.1 KB |
| SAR Test Set up Metadata only | RF Exposure Info | 2002-05-06 | PDF 596 KB |
| SAR Photographs Metadata only | RF Exposure Info | PDF 1.4 MB | |
| SAR Plots Metadata only | RF Exposure Info | PDF 166 KB | |
| Block Diagram( pcmcia not applied for) Metadata only | Block Diagram | PDF 18.7 KB | |
| LA4137 Block Diagram Metadata only | Block Diagram | PDF 20.4 KB | |
| ( pcmcia not applied for) Metadata only | Schematics | PDF 314.9 KB | |
| LA4137 Schematic Diagrahm Metadata only | Schematics | PDF 314.9 KB | |
| Layout Card Metadata only | Schematics | PDF 88.5 KB | |
| Schematics Card( pcmcia not applied for) Metadata only | Schematics | PDF 244.9 KB | |
| Antenna Location Metadata only | Operational Description | PDF 849 KB | |
| Antenna Specification Metadata only | Operational Description | PDF 252.6 KB | |
| LA4137 Operational Description Metadata only | Operational Description | PDF 233.3 KB | |
| Theory of Operartion( pcmcia not applied for) Metadata only | Operational Description | PDF 231.1 KB | |
| BOM Card Metadata only | Parts List/Tune Up Info | PDF 196.4 KB |
Application Information
| Application ID | RaZtq33yNXn1kOKNES9QWA== |
|---|---|
| Final Action Date | 2005-12-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011209004 |
| Model | LA4137 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WLAN COMPACT FLASH CARD |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com  , 346-260-3543 |
| Test Firm | Leslie Bai, SIEMIC Laboratories, Leslie.Bai@siemic.com  , 408-526-1188 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Transmitting device with antenna as shown in this filing is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The highest reported body-worn SAR value for the conditions of this filing is 1.16 mW/g. This SAR data is not applicable to demonstrate compliance for final host products. OEM integration of this device into a host product, and/or use of different or additional antennas, requires the submission by Grantee of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP. Third-party Class II applications cannot be used for integrating this device with different host products and/or antennas. Alternatively, a separate FCC equipment authorization for new antennas or host devices may be obtained; otherwise, any new host devices will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. Compliance of this device in any final configuration is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device. Grantee must inform OEM integrator that the Class II permissive change is required and must be granted prior to marketing of the final host product. The user must be provided with any information required to satisfy RF exposure compliance for the final host device. (Original grant notes 5/6/2002). This Class II Permissive Change adds a specific host configuration. Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. The highest reported SAR value is: Body 0.39 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| RaZtq33yNXn1kOKNES9QWA== | 2005-12-21 | Class II permissive change or modification of presently authorized equipment |
| jKD5b76EYtAY1mxf8mAzAA== | 2005-12-16 | Class II permissive change or modification of presently authorized equipment |
| eafOGHTT2ZjL2FRdqdAxJw== | 2005-10-26 | Class II permissive change or modification of presently authorized equipment |
| P7jR4wSkGByuJJmnAEdLMA== | 2005-05-25 | Class II permissive change or modification of presently authorized equipment |
| KZaJJZMDwJ4uxuQOQMY7ug== | 2003-11-17 | Class II permissive change or modification of presently authorized equipment |
| t5vViD3KX21RmAeVL0rMIQ== | 2003-08-22 | Class II permissive change or modification of presently authorized equipment |
| T2lL90yd/4NGW5/I0ShLZQ== | 2003-04-11 | Class II permissive change or modification of presently authorized equipment |
| 4tuSogr28GwE1Iw0U1nbAA== | 2002-07-12 | Class II permissive change or modification of presently authorized equipment |
| wlMa6aeMuEaAzsaaE0kx6g== | 2002-07-01 | Class II permissive change or modification of presently authorized equipment |
| Rwg1HZaMzr3+5jLL9CvxLg== | 2002-05-06 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application wlMa6aeMuEaAzsaaE0kx6g==
This application does not exist.
EAS Grant - Application wlMa6aeMuEaAzsaaE0kx6g==
This application currently is not in final status.
TCB Grant - Application t5vViD3KX21RmAeVL0rMIQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 08/22/2003 Application Dated: 08/22/2003 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Portable data terminal including WLAN module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.057 | 11M0FID |
| This change is for the specific installation as described in this filing. SAR compliance for body-worn operating configurations is limited to non-metallic belt clips/ or holsters which maintain a minimum distance of 1 cm between the device and the body. This device is not approved for use with headsets The highest reported SAR value is Body Worn : 0.755 W/kg with a 1cm separation |
EAS Grant - Application t5vViD3KX21RmAeVL0rMIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 08/22/2003 Application Dated: 08/22/2003 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Portable data terminal including WLAN module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.057 | 11M0FID |
| This change is for the specific installation as described in this filing. SAR compliance for body-worn operating configurations is limited to non-metallic belt clips/ or holsters which maintain a minimum distance of 1 cm between the device and the body. This device is not approved for use with headsets The highest reported SAR value is Body Worn : 0.755 W/kg with a 1cm separation |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PCTEST Engineering Laboratory, LLC 7185 Oakland Mills Road Columbia, MD 21046 |
Date of Grant: 04/11/2003 Application Dated: 04/11/2003 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Compact Flash Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| Class II Permissive Change. Output is peak conducted. This device is approved for mobile operating configurations with respect to 2.1091 for satisfying RF exposure compliance requirements. Device is authorized for use with the external vehicular antenna described in this filing. End-users must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Maximum antenna gain reported: +3.0 dBi |
EAS Grant - Application T2lL90yd/4NGW5/I0ShLZQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 04/11/2003 Application Dated: 04/11/2003 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Compact Flash Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| Class II Permissive Change. Output is peak conducted. This device is approved for mobile operating configurations with respect to 2.1091 for satisfying RF exposure compliance requirements. Device is authorized for use with the external vehicular antenna described in this filing. End-users must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Maximum antenna gain reported: +3.0 dBi |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 05/06/2002 Application Dated: 12/28/2001 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| This application was originally granted on 04/17/2002. |
| Transmitting device with antenna as shown in this filing is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The highest reported body-worn SAR value for the conditions of this filing is 1.16 mW/g. This SAR data is not applicable to demonstrate compliance for final host products. OEM integration of this device into a host product, and/or use of different or additional antennas, requires the submission by Grantee of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP. Third-party Class II applications cannot be used for integrating this device with different host products and/or antennas. Alternatively, a separate FCC equipment authorization for new antennas or host devices may be obtained; otherwise, any new host devices will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. Compliance of this device in any final configuration is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device. Grantee must inform OEM integrator that the Class II permissive change is required and must be granted prior to marketing of the final host product. The user must be provided with any information required to satisfy RF exposure compliance for the final host device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/21/2005 Application Dated: 12/21/2005 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN COMPACT FLASH CARD |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| Transmitting device with antenna as shown in this filing is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The highest reported body-worn SAR value for the conditions of this filing is 1.16 mW/g. This SAR data is not applicable to demonstrate compliance for final host products. OEM integration of this device into a host product, and/or use of different or additional antennas, requires the submission by Grantee of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP. Third-party Class II applications cannot be used for integrating this device with different host products and/or antennas. Alternatively, a separate FCC equipment authorization for new antennas or host devices may be obtained; otherwise, any new host devices will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. Compliance of this device in any final configuration is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device. Grantee must inform OEM integrator that the Class II permissive change is required and must be granted prior to marketing of the final host product. The user must be provided with any information required to satisfy RF exposure compliance for the final host device. (Original grant notes 5/6/2002). This Class II Permissive Change adds a specific host configuration. Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. The highest reported SAR value is: Body 0.39 W/kg. |
EAS Grant - Application RaZtq33yNXn1kOKNES9QWA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 12/21/2005 Application Dated: 12/21/2005 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN COMPACT FLASH CARD |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| Transmitting device with antenna as shown in this filing is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The highest reported body-worn SAR value for the conditions of this filing is 1.16 mW/g. This SAR data is not applicable to demonstrate compliance for final host products. OEM integration of this device into a host product, and/or use of different or additional antennas, requires the submission by Grantee of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP. Third-party Class II applications cannot be used for integrating this device with different host products and/or antennas. Alternatively, a separate FCC equipment authorization for new antennas or host devices may be obtained; otherwise, any new host devices will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. Compliance of this device in any final configuration is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device. Grantee must inform OEM integrator that the Class II permissive change is required and must be granted prior to marketing of the final host product. The user must be provided with any information required to satisfy RF exposure compliance for the final host device. (Original grant notes 5/6/2002). This Class II Permissive Change adds a specific host configuration. Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. The highest reported SAR value is: Body 0.39 W/kg. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 05/25/2005 Application Dated: 05/25/2005 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Compact Flash Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| Transmitting device with antenna as shown in this filing is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The highest reported body-worn SAR value for the conditions of this filing is 1.16 mW/g. This SAR data is not applicable to demonstrate compliance for final host products. OEM integration of this device into a host product, and/or use of different or additional antennas, requires the submission by Grantee of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP. Third-party Class II applications cannot be used for integrating this device with different host products and/or antennas. Alternatively, a separate FCC equipment authorization for new antennas or host devices may be obtained; otherwise, any new host devices will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. Compliance of this device in any final configuration is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device. Grantee must inform OEM integrator that the Class II permissive change is required and must be granted prior to marketing of the final host product. The user must be provided with any information required to satisfy RF exposure compliance for the final host device. (Original grant notes 5/6/2002) This change is for the approval of the specific antenna described in this filing, for use with the Spacelab’s model 91369 display unit. The antenna used with this radio must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter must be operated only according to the exposure conditions described in this application. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance |
EAS Grant - Application P7jR4wSkGByuJJmnAEdLMA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 05/25/2005 Application Dated: 05/25/2005 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Compact Flash Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| Transmitting device with antenna as shown in this filing is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The highest reported body-worn SAR value for the conditions of this filing is 1.16 mW/g. This SAR data is not applicable to demonstrate compliance for final host products. OEM integration of this device into a host product, and/or use of different or additional antennas, requires the submission by Grantee of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP. Third-party Class II applications cannot be used for integrating this device with different host products and/or antennas. Alternatively, a separate FCC equipment authorization for new antennas or host devices may be obtained; otherwise, any new host devices will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. Compliance of this device in any final configuration is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device. Grantee must inform OEM integrator that the Class II permissive change is required and must be granted prior to marketing of the final host product. The user must be provided with any information required to satisfy RF exposure compliance for the final host device. (Original grant notes 5/6/2002) This change is for the approval of the specific antenna described in this filing, for use with the Spacelab’s model 91369 display unit. The antenna used with this radio must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter must be operated only according to the exposure conditions described in this application. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 11/17/2003 Application Dated: 11/17/2003 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Portable data terminal including WLAN module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 | 11M0FID |
| This change is for the specific installation as described in this filing. The equipment is a portable device intended to be operated in the hand or on the wrist. It must not be body or head worn. This equipment may not be used with any other co-located antenna or transmitter. The maximum 1g SAR value recorded was 0.203W/kg at 2.412GHz with the equipment set in CW mode. |
EAS Grant - Application KZaJJZMDwJ4uxuQOQMY7ug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 11/17/2003 Application Dated: 11/17/2003 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Portable data terminal including WLAN module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 | 11M0FID |
| This change is for the specific installation as described in this filing. The equipment is a portable device intended to be operated in the hand or on the wrist. It must not be body or head worn. This equipment may not be used with any other co-located antenna or transmitter. The maximum 1g SAR value recorded was 0.203W/kg at 2.412GHz with the equipment set in CW mode. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/16/2005 Application Dated: 12/16/2005 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN COMPACT FLASH CARD |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| Transmitting device with antenna as shown in this filing is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The highest reported body-worn SAR value for the conditions of this filing is 1.16 mW/g. This SAR data is not applicable to demonstrate compliance for final host products. OEM integration of this device into a host product, and/or use of different or additional antennas, requires the submission by Grantee of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP. Third-party Class II applications cannot be used for integrating this device with different host products and/or antennas. Alternatively, a separate FCC equipment authorization for new antennas or host devices may be obtained; otherwise, any new host devices will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. Compliance of this device in any final configuration is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device. Grantee must inform OEM integrator that the Class II permissive change is required and must be granted prior to marketing of the final host product. The user must be provided with any information required to satisfy RF exposure compliance for the final host device. (Original grant notes 5/6/2002). This class 2 permissive change adds a specific host configuration. Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. The highest reported SAR value is: Body 0.10 W/kg. |
EAS Grant - Application jKD5b76EYtAY1mxf8mAzAA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 12/16/2005 Application Dated: 12/16/2005 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN COMPACT FLASH CARD |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| Transmitting device with antenna as shown in this filing is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The highest reported body-worn SAR value for the conditions of this filing is 1.16 mW/g. This SAR data is not applicable to demonstrate compliance for final host products. OEM integration of this device into a host product, and/or use of different or additional antennas, requires the submission by Grantee of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP. Third-party Class II applications cannot be used for integrating this device with different host products and/or antennas. Alternatively, a separate FCC equipment authorization for new antennas or host devices may be obtained; otherwise, any new host devices will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. Compliance of this device in any final configuration is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device. Grantee must inform OEM integrator that the Class II permissive change is required and must be granted prior to marketing of the final host product. The user must be provided with any information required to satisfy RF exposure compliance for the final host device. (Original grant notes 5/6/2002). This class 2 permissive change adds a specific host configuration. Power listed is conducted. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. The highest reported SAR value is: Body 0.10 W/kg. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 10/26/2005 Application Dated: 10/26/2005 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Compact Flash Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| Transmitting device with antenna as shown in this filing is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The highest reported body-worn SAR value for the conditions of this filing is 1.16 mW/g. This SAR data is not applicable to demonstrate compliance for final host products. OEM integration of this device into a host product, and/or use of different or additional antennas, requires the submission by Grantee of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP. Third-party Class II applications cannot be used for integrating this device with different host products and/or antennas. Alternatively, a separate FCC equipment authorization for new antennas or host devices may be obtained; otherwise, any new host devices will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. Compliance of this device in any final configuration is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device. Grantee must inform OEM integrator that the Class II permissive change is required and must be granted prior to marketing of the final host product. The user must be provided with any information required to satisfy RF exposure compliance for the final host device. (Original grant notes 5/6/2002). This change is for the approval of the specific antenna described in this filing, for use with the Spacelab’s model 91370 display unit. The antenna used with this radio must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter must be operated only according to the exposure conditions described in this application. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application eafOGHTT2ZjL2FRdqdAxJw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 10/26/2005 Application Dated: 10/26/2005 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN Compact Flash Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| Transmitting device with antenna as shown in this filing is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The highest reported body-worn SAR value for the conditions of this filing is 1.16 mW/g. This SAR data is not applicable to demonstrate compliance for final host products. OEM integration of this device into a host product, and/or use of different or additional antennas, requires the submission by Grantee of a Class II permissive change application containing data demonstrating compliance for SAR, spurious emissions, and EIRP. Third-party Class II applications cannot be used for integrating this device with different host products and/or antennas. Alternatively, a separate FCC equipment authorization for new antennas or host devices may be obtained; otherwise, any new host devices will be considered unauthorized equipment. Marketing of unauthorized equipment is prohibited by Section 2.803 of the FCC Rules. Compliance of this device in any final configuration is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or must not operate in conjunction with any other antenna or transmitter within a host device. Grantee must inform OEM integrator that the Class II permissive change is required and must be granted prior to marketing of the final host product. The user must be provided with any information required to satisfy RF exposure compliance for the final host device. (Original grant notes 5/6/2002). This change is for the approval of the specific antenna described in this filing, for use with the Spacelab’s model 91370 display unit. The antenna used with this radio must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter must be operated only according to the exposure conditions described in this application. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 07/12/2002 Application Dated: 06/17/2002 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA4137 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Portable Network Printer w/ WLAN PC Card Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1 |
| Power is conducted. |
| This Class II permissive change is for the specific antenna and printer installation as described in this filing. SAR compliance for body-worn operating configurations is limited to the specific belt-clips/holsters/accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value is - Body-worn: 0.26 W/kg. |
| Mail To: |
| Randy Ortanez, President |
| PCTEST Engineering Lab., Inc. |
| 6660-B Dobbin Road |
| Columbia, MD 21045 |