FCC ID H9PLA5137A2
802.11a/b/g Compact Flash Radio Card
by Symbol Technologies Inc
Grantee Code: H9P Product Code: LA5137A2
Latest application date: 2016-05-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-27 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-27 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2010-09-27 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2010-09-27 |
| 2412-2462 MHz | Original Equipment | 2007-08-01 |
| 5180-5320 MHz | Original Equipment | 2007-08-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2007-10-30 | PDF 500.7 KB |
| Internal Photos | Internal Photos | 2010-09-27 | PDF 874.8 KB |
| Internal Photos | Internal Photos | 2007-10-30 | PDF 836.5 KB |
| External Photos | External Photos | 2010-09-27 | PDF 146.6 KB |
| External Photos | External Photos | 2007-10-30 | PDF 147.4 KB |
| Label | ID Label/Location Info | 2007-08-01 | PDF 171.4 KB |
| Label Location | ID Label/Location Info | 2007-08-01 | PDF 23.6 KB |
| Test Setup Photos | Test Setup Photos | 2010-09-27 | PDF 223.7 KB |
| Test Setup Photos | Test Setup Photos | 2007-10-30 | PDF 851.4 KB |
| Test Setup Photos 1 | Test Setup Photos | 2007-10-30 | PDF 144.6 KB |
| Test Setup Photos 2 | Test Setup Photos | 2007-10-30 | PDF 851.4 KB |
| Test Report - 15C | Test Report | 2010-09-27 | PDF 409.1 KB |
| Test Report - 15E | Test Report | 2010-09-27 | PDF 385.4 KB |
| Test Report 1 | Test Report | 2007-08-01 | PDF 2.2 MB |
| Test Report 1 | Test Report | 2007-08-01 | PDF 2.6 MB |
| Test Report 2 | Test Report | 2007-08-01 | PDF 2.9 MB |
| Test Report 2 | Test Report | 2007-08-01 | PDF 1.7 MB |
| Test Report 3 | Test Report | 2007-08-01 | PDF 2.5 MB |
| Test Report for DFS | Test Report | 2007-08-01 | PDF 220.8 KB |
| Cover Letter | Cover Letter(s) | 2016-05-27 | PDF 74.6 KB |
| Cover Letter Agent Authorization | Cover Letter(s) | 2010-09-27 | PDF 175.1 KB |
| Cover Letter Contact Authorization | Cover Letter(s) | 2010-09-27 | PDF 27.9 KB |
| Cover Letter Description of Change | Cover Letter(s) | 2010-09-27 | PDF 59.8 KB |
| Agency Agreement | Cover Letter(s) | 2007-08-01 | PDF 95.4 KB |
| Confidentiality Request | Cover Letter(s) | 2007-08-01 | PDF 128.9 KB |
| General Declaration | Cover Letter(s) | 2007-08-01 | PDF 30.1 KB |
| Modular Request | Cover Letter(s) | 2007-08-01 | PDF 28.2 KB |
| RF Exposure Info | RF Exposure Info | 2010-09-27 | PDF 44.9 KB |
| RF Exposure Info | RF Exposure Info | 2007-08-01 | PDF 87.9 KB |
| Operational Description Software Security Metadata only | Operational Description | PDF 436.6 KB |
Application Information
| Application ID | vRHhHKliZ0oQAVkwdsh23g== |
|---|---|
| Final Action Date | 2016-05-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011209004 |
| Model | LA5137A2 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11a/b/g Compact Flash Radio Card |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com  , 346-260-3543 |
| Test Firm | Alex Chen, SPORTON International Inc., alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.. (Date of Grant: 08/01/2007) Class II Permissive Change: This Class II permissive Change is to update UNII new rules. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vRHhHKliZ0oQAVkwdsh23g== | 2016-05-27 | Class II permissive change or modification of presently authorized equipment |
| N5XRVMUltkP+d3/IUZPPGw== | 2016-05-27 | Class II permissive change or modification of presently authorized equipment |
| NdLtIj0JgDQYW105onqkVQ== | 2010-09-27 | Class II permissive change or modification of presently authorized equipment |
| KLRR4nbPMemfrn9n2TZE9A== | 2010-09-27 | Class II permissive change or modification of presently authorized equipment |
| wWl2BR5foWzRRvheiq1SoA== | 2007-08-01 | Original Equipment |
| w9My/OJpMz127kexpuMnoA== | 2007-08-01 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application wWl2BR5foWzRRvheiq1SoA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 | Date of Grant: 08/01/2007 Application Dated: 08/01/2007 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA5137A2 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g Compact Flash Radio Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.066 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application wWl2BR5foWzRRvheiq1SoA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States | Date of Grant: 08/01/2007 Application Dated: 08/01/2007 |
| Attention: Mark Luksich , DMTS, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA5137A2 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g Compact Flash Radio Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.066 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
| EA419886 |
TCB Grant - Application w9My/OJpMz127kexpuMnoA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 | Date of Grant: 08/01/2007 Application Dated: 08/01/2007 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA5137A2 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g Compact Flash Radio Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.028 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.038 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application w9My/OJpMz127kexpuMnoA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States | Date of Grant: 08/01/2007 Application Dated: 08/01/2007 |
| Attention: Mark Luksich , DMTS, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA5137A2 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g Compact Flash Radio Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.028 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.038 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
| EA493019 |
TCB Grant - Application vRHhHKliZ0oQAVkwdsh23g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/27/2016 Application Dated: 05/27/2016 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA5137A2 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g Compact Flash Radio Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.. (Date of Grant: 08/01/2007) Class II Permissive Change: This Class II permissive Change is to update UNII new rules. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application vRHhHKliZ0oQAVkwdsh23g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 05/27/2016 Application Dated: 05/27/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA5137A2 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g Compact Flash Radio Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.. (Date of Grant: 08/01/2007) Class II Permissive Change: This Class II permissive Change is to update UNII new rules. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 09/27/2010 Application Dated: 09/27/2010 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA5137A2 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g Compact Flash Radio Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.066 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change filing for modifying RF shielding cover. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application NdLtIj0JgDQYW105onqkVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 09/27/2010 Application Dated: 09/27/2010 |
| Attention: Mark Luksich , DMTS, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA5137A2 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g Compact Flash Radio Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.066 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change filing for modifying RF shielding cover. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/27/2016 Application Dated: 05/27/2016 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA5137A2 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g Compact Flash Radio Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 49 CC ND | 15E | 5180.0 - 5320.0 | 0.028 | ||
| 49 CC ND | 15E | 5500.0 - 5700.0 | 0.038 | ||
| 49 CC | 15E | 5745.0 - 5825.0 | 0.066 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. (Date of Grant: 08/01/2007) Class II Permissive Change: This Class II permissive Change is to update UNII new rules. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application N5XRVMUltkP+d3/IUZPPGw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 05/27/2016 Application Dated: 05/27/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA5137A2 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g Compact Flash Radio Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 49 CC ND | 15E | 5180.0 - 5320.0 | 0.028 | ||
| 49 CC ND | 15E | 5500.0 - 5700.0 | 0.038 | ||
| 49 CC | 15E | 5745.0 - 5825.0 | 0.066 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. (Date of Grant: 08/01/2007) Class II Permissive Change: This Class II permissive Change is to update UNII new rules. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 09/27/2010 Application Dated: 09/27/2010 |
| Symbol Technologies Inc |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA5137A2 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g Compact Flash Radio Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.028 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.038 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. Class II Permissive Change filing for modifying RF shielding cover. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application KLRR4nbPMemfrn9n2TZE9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Symbol Technologies Inc 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 09/27/2010 Application Dated: 09/27/2010 |
| Attention: Mark Luksich , DMTS, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | H9PLA5137A2 |
| Name of Grantee: | Symbol Technologies Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g Compact Flash Radio Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.028 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.038 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. Class II Permissive Change filing for modifying RF shielding cover. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |