FCC ID HBW8439

CAPXLV

by Chamberlain Group Inc, The

Grantee Code: HBW   Product Code: 8439
Latest application date: 2022-08-18

Device Images

FCC ID Device Details

FCC IDHBW8439
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeHBW
Product Code8439
Applicant BusinessChamberlain Group Inc, The 🇺🇸
Related Domains chamberlain.com
Equipment ClassCAPXLV
Test FirmElite Electronic Engineering Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.25-926.75 MHzClass II permissive change or modification of presently authorized equipment2022-08-18
902.25-926.75 MHzClass II permissive change or modification of presently authorized equipment2020-02-03
902.25-926.75 MHzOriginal Equipment2016-10-26

Exhibits

DocumentTypeAvailableFile
Product Literature_20161004_v1 - 6 ACXL Manual_1Users Manual2016-10-26PDF 4.4 MB
Product Literature_20161004_v1 - 6 ACXL Manual_2Users Manual2016-10-26PDF 4.4 MB
Internal Photos_20161004_v1 - 8 AXCL INTERNAL PHOTOSInternal Photos2016-10-26PDF 1.8 MB
External Photos_20161004_v1 - 7 AXCL EXTERNAL PHOTOSExternal Photos2016-10-26PDF 909.7 KB
10 AXCL Label Location REV1ID Label/Location Info2016-10-26PDF 143.5 KB
9b ACXL Modular Label ArtID Label/Location Info2016-10-26PDF 99.7 KB
ID Label & Location Info._20161004_v1 - 10 AXCL Label LocationID Label/Location Info2016-10-26PDF 98.8 KB
ID Label & Location Info._20161004_v1 - 9 ACXL Label ArtID Label/Location Info2016-10-26PDF 95.4 KB
ACXL Test Setup Photos REV1Test Setup Photos2016-10-26PDF 1.1 MB
ETR2202310-01Test Report2022-08-18PDF 3.1 MB
Exhibit E Test Measurement Report per 2 1033 c14Test Report2020-02-03PDF 1 MB
ACXL Test Report REV1Test Report2016-10-26PDF 1.5 MB
Correlation Data for measurements below 30MHzTest Report2016-10-26PDF 129.9 KB
FCC Agency Authorization Letter_HBW8439Cover Letter(s)2022-08-18PDF 96.4 KB
FCC C2PC Cover Letter_HBW8439_CAPXLVCover Letter(s)2022-08-18PDF 32.5 KB
HBW8439_FCC Confidentiality_CAPXLVCover Letter(s)2022-08-18PDF 74.8 KB
C2PC Cover Letter Detailing the reason for the filing.Cover Letter(s)2020-02-03PDF 41.8 KB
Cover Letters_20161004_v1 - 1 FCC authorization letterCover Letter(s)2016-10-26PDF 24.9 KB
Cover Letters_20161004_v1 - 2 FCC Confidentiality RequestCover Letter(s)2016-10-26PDF 27.8 KB
Professional Installation Declaration - FCC 2016 08 26Cover Letter(s)2016-10-26PDF 26 KB
AXCL MPE ReportRF Exposure Info2016-10-26PDF 311.5 KB
Block Diagrams_20161004_v1 - 4 CONFIDENTIAL ACXL Block Diagram Metadata onlyBlock DiagramPDF 103.3 KB
Schematics_20161004_v1 - 5 CONFIDENTIAL Radio Schematic and Parts List Metadata onlySchematicsPDF 1.1 MB
3 CONFIDENTIAL ACXLTheory of operation REV1 Metadata onlyOperational DescriptionPDF 147.4 KB

Application Information

Application IDCIQeCZEMFLd7mqelwB/rYA==
Final Action Date2022-08-18
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004301545
Model8439
Frequency Range902.25-926.75 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionCAPXLV
Responsible PartyBarbara Kelkhoff, Regulatory Engineering Manager, barbara.kelkhoff@chamberlain.com , 630 993-6306
Technical ContactAndrew Marks, The Chamberlain Group, Inc., andrew.marks@chamberlain.com , 6305012269
Test FirmKevin Halpin, Elite Electronic Engineering Inc., khalpin@elitetest.com , 630-495-9770
TCB Emailreking@elitetest.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. Professional installation required. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except those documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC as indicated in this filing.

Applications

Application IDDatePurpose
CIQeCZEMFLd7mqelwB/rYA==2022-08-18Class II permissive change or modification of presently authorized equipment
96lsK5nRLNgLeyaA7oNNOQ==2020-02-03Class II permissive change or modification of presently authorized equipment
CCWrhc2OkL+RvvuGFtpOvQ==2016-10-26Original Equipment

Equipment Authorization

FrequencyOutputRules
902.25-926.75 MHz0.025300015C

Grants

TCB Grant - Application CIQeCZEMFLd7mqelwB/rYA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 08/18/2022

Application Dated: 08/18/2022
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8439
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CAPXLV
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  926.75 0.0253  

Power output listed is conducted. Professional installation required. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except those documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC as indicated in this filing.

EAS Grant - Application CIQeCZEMFLd7mqelwB/rYA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 08/18/2022

Application Dated: 08/18/2022
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8439
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CAPXLV
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  926.75 0.0253  

Power output listed is conducted. Professional installation required. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except those documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC as indicated in this filing.



TCB Grant - Application CCWrhc2OkL+RvvuGFtpOvQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 10/26/2016

Application Dated: 10/24/2016
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8439
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: ACXL Operator
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  926.75 0.0253  

Power output listed is conducted. Professional installation required. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except those documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application CCWrhc2OkL+RvvuGFtpOvQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 10/26/2016

Application Dated: 10/24/2016
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8439
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: ACXL Operator
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  926.75 0.0253  

Power output listed is conducted. Professional installation required. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except those documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



TCB Grant - Application 96lsK5nRLNgLeyaA7oNNOQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 02/03/2020

Application Dated: 02/03/2020
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8439
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CAPXL
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  926.75 0.0253  

Power output listed is conducted. Professional installation required. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except those documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC as indicated in this filing.

EAS Grant - Application 96lsK5nRLNgLeyaA7oNNOQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 02/03/2020

Application Dated: 02/03/2020
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8439
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CAPXL
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  926.75 0.0253  

Power output listed is conducted. Professional installation required. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter except those documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC as indicated in this filing.



Mail To: