FCC ID HBW8522

Marvell MW300 chip on WiFi module 001D9193-2

by Chamberlain Group Inc, The

Grantee Code: HBW   Product Code: 8522
Latest application date: 2019-08-21

Device Images

FCC ID Device Details

FCC IDHBW8522
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeHBW
Product Code8522
Applicant BusinessChamberlain Group Inc, The 🇺🇸
Related Domains chamberlain.com
Equipment ClassMarvell MW300 chip on WiFi module 001D9193-2
Test FirmElite Electronic Engineering Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2019-08-21
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2019-04-25
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2018-04-16
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2017-11-29
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2017-06-29
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2017-06-29
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2017-06-02
2412-2462 MHzOriginal Equipment2017-05-01

Exhibits

DocumentTypeAvailableFile
myQ-H3 manual - hostUsers Manual2019-04-25PDF 1.8 MB
myQ-H3LM Manual - hostUsers Manual2019-04-25PDF 942.7 KB
114A4992 - User ManualUsers Manual2017-06-02PDF 634.3 KB
User Manual - InternalUsers Manual2017-05-01PDF 157.8 KB
User Manual - Internal (2) - AA 2017-05-15Users Manual2017-05-01PDF 71.4 KB
Exhibit C Internal Photographs per 2 1033 b7Internal Photos2019-08-21PDF 305.1 KB
BHub internal photo hostInternal Photos2019-04-25PDF 212.9 KB
Exhibit C Internal Photographs per 2 1033 b7Internal Photos2017-11-29PDF 372.8 KB
Exhibit C Internal Photographs per 2 1033 b7Internal Photos2017-06-29PDF 1.4 MB
Exhibit C Internal Photographs per 2 1033 b7Internal Photos2017-06-29PDF 1.1 MB
8. A-Hub INTERNAL PHOTOSInternal Photos2017-06-02PDF 260.9 KB
8. Q-Hub INTERNAL PHOTOSInternal Photos2017-06-02PDF 258.1 KB
Photos - External & InternalInternal Photos2017-05-01PDF 1.2 MB
BHub external photo hostExternal Photos2019-04-25PDF 115.2 KB
Exhibit C External Photographs per 2 1033 b7External Photos2017-11-29PDF 172.6 KB
Exhibit C External Photographs per 2 1033 b7External Photos2017-06-29PDF 1.3 MB
Exhibit C External Photographs per 2 1033 b7External Photos2017-06-29PDF 1.1 MB
7. A-Hub EXTERNAL PHOTOSExternal Photos2017-06-02PDF 201.5 KB
7. Q-Hub EXTERNAL PHOTOSExternal Photos2017-06-02PDF 173.7 KB
Photos - External & InternalExternal Photos2017-05-01PDF 1.2 MB
Exhibit A ID Label and location per 2 1033 b7ID Label/Location Info2019-08-21PDF 231.6 KB
Host Label with locationID Label/Location Info2019-04-25PDF 453.7 KB
label host myQ-H3ID Label/Location Info2019-04-25PDF 546.9 KB
label host myQ-H3LMID Label/Location Info2019-04-25PDF 791.5 KB
Exhibit A ID Label and location per 2 1033 b7ID Label/Location Info2017-11-29PDF 130.7 KB
Exhibit A ID Label and location per 2 1033 b7ID Label/Location Info2017-06-29PDF 996 KB
Exhibit A ID Label and location per 2 1033 b7ID Label/Location Info2017-06-29PDF 636.1 KB
9. Label Artwork - 132B3047-1ID Label/Location Info2017-06-02PDF 96.4 KB
9. Label Artwork - 132B3047-2ID Label/Location Info2017-06-02PDF 141.4 KB
Label Location - 2017-05-10ID Label/Location Info2017-06-02PDF 218.1 KB
Label Artwork and Location (2017-04-13) - Laset etchedID Label/Location Info2017-05-01PDF 87.8 KB
Exhibit C RE Test Setup photographsTest Setup Photos2019-08-21PDF 138.3 KB
Photos - Test Setup - 11522654A Chamberlain Group A-Hub C2PC Report - MW300 LM aTest Setup Photos2017-06-02PDF 758.7 KB
Photos - Test SetupTest Setup Photos2017-05-01PDF 758.2 KB
Exhibit E Test Measurement Report per 2 1033 b6Test Report2019-08-21PDF 1.8 MB
31951956.001_FCC_15B_ReportTest Report2019-04-25PDF 3 MB
Exhibit E Test Measurement Report per 2 1033 b6Test Report2018-04-16PDF 1.3 MB
Exhibit E Test Measurement Report per 2 1033 b6Test Report2017-11-29PDF 3.9 MB
Exhibit E Test Measurement Report per 2 1033 b6Test Report2017-06-29PDF 5 MB
11522654A Chamberlain Group A-Hub C2PC Report - MW300 LM added to device (2)Test Report2017-06-02PDF 2.7 MB
Order 11522702A 802.11bgn limited modular FCC 15.247 RSS-247 Test ReportTest Report2017-05-01PDF 4.5 MB
Order 11522702A 802.11bgn limited modular FCC 15.247 RSS-247 Test Report Rev 0_1Test Report2017-05-01PDF 4.5 MB
Order 11522702B 802.11bgn limited modular RF Exposure Test Report.pdfRF Exposure Info2017-05-01PDF 292.2 KB
Cover Letter Requesting Class II Permissive ChangeCover Letter(s)2019-08-21PDF 60.6 KB
Cover Letter Requesting ConfidentialityCover Letter(s)2019-08-21PDF 115.7 KB
B-Hub Auth Letter 23Apr19Cover Letter(s)2019-04-25PDF 63.1 KB
C2PC Cover Letter Chamberlain FCC HBW-8522_17Apr19Cover Letter(s)2019-04-25PDF 69.6 KB
FCC Confidentiality Request 2019-04-16Cover Letter(s)2019-04-25PDF 113.2 KB
Cover Letter Requesting Class II Permissive ChangeCover Letter(s)2018-04-16PDF 45.8 KB
Cover Letter Requesting Class II Permissive ChangeCover Letter(s)2017-11-29PDF 46.1 KB
Cover Letter Requesting Class II Permissive ChangeCover Letter(s)2017-06-29PDF 233.5 KB
1. FCC Authorization LetterCover Letter(s)2017-06-02PDF 140.9 KB
2. FCC C2PC Letter - 2017-05-31Cover Letter(s)2017-06-02PDF 173 KB
2. FCC Confidentiality Request - 2017-06-02Cover Letter(s)2017-06-02PDF 151.6 KB
FCC Authorization LetterCover Letter(s)2017-05-01PDF 140.9 KB
FCC Confidentiality Request (2017-04-13)Cover Letter(s)2017-05-01PDF 150.3 KB
Modular Approval Letter FCCCover Letter(s)2017-05-01PDF 136.1 KB
FCC RF Exposure_31951957.001RF Exposure Info2019-04-25PDF 624.6 KB
11522654B Chamberlain Group A-Hub C2PC Report - MW300 LM added to device MPE RepRF Exposure Info2017-06-02PDF 344.9 KB
block diagram Metadata onlyBlock DiagramPDF 203.4 KB
001D8522-2 Schematics & Parts List Metadata onlySchematicsPDF 1.6 MB
5. 001D8246-2 Schematics & Parts List Metadata onlySchematicsPDF 2.2 MB
Exhibit B Schematics per 2 1033 b5 Metadata onlySchematicsPDF 513.4 KB
Schematic 001D8246-5 ANNOTATED - host Metadata onlySchematicsPDF 954 KB
Theory of Operation (A-Hub) 2017-05-31 Metadata onlyOperational DescriptionPDF 664 KB
Theory of Operation (Q-Hub) 2017-05-31 Metadata onlyOperational DescriptionPDF 607.1 KB
Theory of Operation rev 4 plus - BHUB - host -23Apr19 Metadata onlyOperational DescriptionPDF 274.4 KB
Theory of Operations (2017-04-13) FCC Metadata onlyOperational DescriptionPDF 357.9 KB

Application Information

Application IDfiHDkFu60t1xmFEiqeVtaw==
Final Action Date2019-08-21
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004301545
Model8522
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMarvell MW300 chip on WiFi module 001D9193-2
Responsible PartyBarbara Kelkhoff, Regulatory Engineering Manager, barbara.kelkhoff@chamberlain.com , 630 993-6306
Technical ContactBill Carey, Chamberlain Group, bill.carey@chamberlain.com , 6305012319
Test FirmKevin Halpin, Elite Electronic Engineering Inc., khalpin@elitetest.com , 630-495-9770
TCB Emailmelonginotti@elitetest.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass 2 Permissive Change to apply changes as described in this filing. Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
fiHDkFu60t1xmFEiqeVtaw==2019-08-21Class II permissive change or modification of presently authorized equipment
+LViw7M9eDShUX4cYFd3qw==2019-04-25Class II permissive change or modification of presently authorized equipment
LQLHtvoJ42rL3TltdKm+FA==2018-04-16Class II permissive change or modification of presently authorized equipment
YziWF+2tjPbz2M0x21aSwg==2017-11-29Class II permissive change or modification of presently authorized equipment
kGqlvYl1RAhv0WqB85wVSw==2017-06-29Class II permissive change or modification of presently authorized equipment
91JNc+gY9EkEoEToLsGODg==2017-06-29Class II permissive change or modification of presently authorized equipment
sjVuBdG8KDVG716k1nW8nw==2017-06-02Class II permissive change or modification of presently authorized equipment
jVFDNH2f6wfFrz+IKHU1LA==2017-05-01Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.054200015C
2412-2462 MHz0.045000015C
2412-2462 MHz0.054000015C

Grants

TCB Grant - Application YziWF+2tjPbz2M0x21aSwg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 11/29/2017

Application Dated: 11/29/2017
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: Garage Door Opener
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.054  

Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance. Class 2 Permissive Change to add host device as documented.

EAS Grant - Application YziWF+2tjPbz2M0x21aSwg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 11/29/2017

Application Dated: 11/29/2017
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: Garage Door Opener
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.054  

Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance. Class 2 Permissive Change to add host device as documented.



TCB Grant - Application sjVuBdG8KDVG716k1nW8nw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/02/2017

Application Dated: 06/02/2017
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: MW300 LM with Host
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0542  

Class 2 Permissive Change to combine with host device as documented.

Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures.

The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance.


EAS Grant - Application sjVuBdG8KDVG716k1nW8nw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 06/02/2017

Application Dated: 06/02/2017
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: MW300 LM with Host
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0542  

Class 2 Permissive Change to combine with host device as documented.

Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures.

The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance.



TCB Grant - Application LQLHtvoJ42rL3TltdKm+FA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 04/16/2018

Application Dated: 04/16/2018
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: Garage Door Opener
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.045  

Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance. Class 2 Permissive Change to add host device as documented.

EAS Grant - Application LQLHtvoJ42rL3TltdKm+FA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 04/16/2018

Application Dated: 04/16/2018
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: Garage Door Opener
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.045  

Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance. Class 2 Permissive Change to add host device as documented.



TCB Grant - Application kGqlvYl1RAhv0WqB85wVSw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 06/29/2017

Application Dated: 06/29/2017
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: GDO Models incorporating Marvell Wi-Fi MW300 Module soldered to host DC logic board assembly no. 001D8169-4
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0542  

Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance. Class 2 Permissive Change to add host device as documented.

EAS Grant - Application kGqlvYl1RAhv0WqB85wVSw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 06/29/2017

Application Dated: 06/29/2017
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: GDO Models incorporating Marvell Wi-Fi MW300 Module soldered to host DC logic board assembly no. 001D8169-4
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0542  

Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance. Class 2 Permissive Change to add host device as documented.



TCB Grant - Application jVFDNH2f6wfFrz+IKHU1LA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/01/2017

Application Dated: 05/01/2017
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: 802.11bgn module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0542  

Listed output power values are average conducted.

This device supports up to 20 MHz bandwidth operations.

Use of this single limited module certification is constraint to integrations into the Grantee’s own host devices and is subject to the FCC Permissive Change procedures.

The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance.


EAS Grant - Application jVFDNH2f6wfFrz+IKHU1LA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 05/01/2017

Application Dated: 05/01/2017
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: 802.11bgn module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0542  

Listed output power values are average conducted.

This device supports up to 20 MHz bandwidth operations.

Use of this single limited module certification is constraint to integrations into the Grantee’s own host devices and is subject to the FCC Permissive Change procedures.

The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance.



TCB Grant - Application fiHDkFu60t1xmFEiqeVtaw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 08/21/2019

Application Dated: 08/21/2019
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: Marvell MW300 chip on WiFi module 001D9193-2
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0542  

Class 2 Permissive Change to apply changes as described in this filing. Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations.

Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures.

The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance.


EAS Grant - Application fiHDkFu60t1xmFEiqeVtaw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 08/21/2019

Application Dated: 08/21/2019
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: Marvell MW300 chip on WiFi module 001D9193-2
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0542  

Class 2 Permissive Change to apply changes as described in this filing. Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations.

Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures.

The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance.



TCB Grant - Application 91JNc+gY9EkEoEToLsGODg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 06/29/2017

Application Dated: 06/29/2017
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: GDO Models incorporating Marvell Wi-Fi Module MW300 soldered to host AC logic board assembly no. 001D8088-4
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0542  

Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance. Class 2 Permissive Change to add host device as documented.

EAS Grant - Application 91JNc+gY9EkEoEToLsGODg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 06/29/2017

Application Dated: 06/29/2017
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: GDO Models incorporating Marvell Wi-Fi Module MW300 soldered to host AC logic board assembly no. 001D8088-4
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0542  

Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance. Class 2 Permissive Change to add host device as documented.



TCB Grant - Application +LViw7M9eDShUX4cYFd3qw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 04/25/2019

Application Dated: 04/24/2019
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: Ceiling mounted WiFi Garage Door Controller
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0542  

Class 2 Permissive Change to combine with host device as documented.

Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations.

Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures.

The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance.


EAS Grant - Application +LViw7M9eDShUX4cYFd3qw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 04/25/2019

Application Dated: 04/24/2019
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW8522
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Digital Transmission System
Notes: Ceiling mounted WiFi Garage Door Controller
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0542  

Class 2 Permissive Change to combine with host device as documented.

Listed output power values are average conducted. This device supports up to 20 MHz bandwidth operations.

Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures.

The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Users must be provided with instructions for satisfying RF exposure compliance.



Mail To: