FCC ID HBW9526-12

Commercial Door Operators Models VFOH5011, VFOH5021, VFOH5045

by Chamberlain Group Inc, The

Grantee Code: HBW   Product Code: 952612
Latest application date: 2020-05-06

FCC ID Device Details

FCC IDHBW9526-12
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeHBW
Product Code952612
Applicant BusinessChamberlain Group Inc, The 🇺🇸
Related Domains chamberlain.com
Equipment ClassCommercial Door Operators Models VFOH5011, VFOH5021, VFOH5045
Test FirmElite Electronic Engineering Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.25-926.75 MHzClass II permissive change or modification of presently authorized equipment2020-05-06
902.25-926.75 MHzClass II permissive change or modification of presently authorized equipment2020-05-06
902.25-926.75 MHzOriginal Equipment2019-10-09

Exhibits

DocumentTypeAvailableFile
Exhibit D Users Manual per 2 1033 b3Users Manual2019-10-09PDF 419.2 KB
Exhibit C Internal Photographs per 2 1033 b7Internal Photos2019-10-09PDF 348.4 KB
Exhibit C External Photographs per 2 1033 b7External Photos2019-10-09PDF 348.4 KB
Exhibit A ID Label and location per 2 1033 b7ID Label/Location Info2020-05-06PDF 319.9 KB
Exhibit A ID Label and location per 2 1033 b7 which lists ContainsID Label/Location Info2020-05-06PDF 319.9 KB
Exhibit A ID Label and location per 2 1033 b7ID Label/Location Info2019-10-09PDF 88.9 KB
Exhibit C RE Test Setup photographsTest Setup Photos2019-10-09PDF 459.9 KB
Exhibit E Test Measurement Report per 2 1033 b6Test Report2020-05-06PDF 587.4 KB
Exhibit E Test Measurement Report per 2 1033 b6Test Report2019-10-09PDF 3.3 MB
Cover Letter Detailing the reason for the filing.Cover Letter(s)2020-05-06PDF 90.4 KB
Cover Letter Requesting Class II Permissive Change detailing reason for filingCover Letter(s)2020-05-06PDF 90.4 KB
Cover Letter Limited Modular ApprovalCover Letter(s)2019-10-09PDF 270.2 KB
Cover Letter Modular Approval Metadata onlyCover Letter(s)2019-10-09PDF 61.9 KB
Cover Letter Requesting ConfidentialityCover Letter(s)2019-10-09PDF 114.5 KB
Exhibit B Block Diagram per 2 1033 b5 Metadata onlyBlock DiagramPDF 110.5 KB
Exhibit B Schematics per 2 1033 b5 Metadata onlySchematicsPDF 986 KB
Exhibit B Operational Description per 2 1033 b4 Metadata onlyOperational DescriptionPDF 185.8 KB
Misc Parts List Exhibits Metadata onlyParts List/Tune Up InfoPDF 13.5 KB

Application Information

Application IDgz582U167p+NtlIlQ62Ang==
Final Action Date2020-05-06
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004301545
Model9526-12
Frequency Range902.25-926.75 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionCommercial Door Operators Models VFOH5011, VFOH5021, VFOH5045
Responsible PartyBarbara Kelkhoff, Regulatory Engineering Manager, barbara.kelkhoff@chamberlain.com , 630 993-6306
Technical ContactBarbara Kelkhoff, The Chamberlain Group, Inc., bkelkhoff@chamberlain.com , 6309936306
Non-Technical ContactBarbara Kelkhoff, The Chamberlain Group, Inc., bkelkhoff@chamberlain.com , 6309936306
Test FirmKevin Halpin, Elite Electronic Engineering Inc., khalpin@elitetest.com , 630-495-9770
TCB Emailreking@elitetest.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This OEM module is restricted for use with the specific antenna(s) tested for in this filing. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. Class II permissive change to add host MC21

Applications

Application IDDatePurpose
gz582U167p+NtlIlQ62Ang==2020-05-06Class II permissive change or modification of presently authorized equipment
0xbmKh5HQnMZz3o9Fiz0mQ==2020-05-06Class II permissive change or modification of presently authorized equipment
mrvAmiJ6J3GZUhxEzefWNQ==2019-10-09Original Equipment

Equipment Authorization

FrequencyOutputRules
902.25-926.75 MHz0.022800015C

Grants

TCB Grant - Application mrvAmiJ6J3GZUhxEzefWNQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 10/09/2019

Application Dated: 10/09/2019
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW9526-12
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Part 15 Spread Spectrum Transmitter Commercial Door Operator Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  926.75 0.0228  

Output Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application mrvAmiJ6J3GZUhxEzefWNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 10/09/2019

Application Dated: 10/09/2019
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW9526-12
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Part 15 Spread Spectrum Transmitter Commercial Door Operator Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  926.75 0.0228  

Output Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application gz582U167p+NtlIlQ62Ang==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 05/06/2020

Application Dated: 05/06/2020
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW9526-12
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Commercial Door Operators Models VFOH5011, VFOH5021, VFOH5045
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  926.75 0.0228  

Output Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This OEM module is restricted for use with the specific antenna(s) tested for in this filing. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. Class II permissive change to add host MC21

EAS Grant - Application gz582U167p+NtlIlQ62Ang==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 05/06/2020

Application Dated: 05/06/2020
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW9526-12
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Commercial Door Operators Models VFOH5011, VFOH5021, VFOH5045
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  926.75 0.0228  

Output Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This OEM module is restricted for use with the specific antenna(s) tested for in this filing. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. Class II permissive change to add host MC21



TCB Grant - Application 0xbmKh5HQnMZz3o9Fiz0mQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 05/06/2020

Application Dated: 05/05/2020
Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW9526-12
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Commercial Door Operators Models VFOH5011, VFOH5021, VFOH5045
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  926.75 0.0228  

Output Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This OEM module is restricted for use with the specific antenna(s) tested for in this filing. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. Class II permissive change to add host MC11.

EAS Grant - Application 0xbmKh5HQnMZz3o9Fiz0mQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Chamberlain Group Inc, The
300 Windsor Dr
Oak Brook, IL 60523
United States
  Date of Grant: 05/06/2020

Application Dated: 05/05/2020
 
Attention: Barbara Kelkhoff , Regulatory Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HBW9526-12
Name of Grantee:  Chamberlain Group Inc, The
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Commercial Door Operators Models VFOH5011, VFOH5021, VFOH5045
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  926.75 0.0228  

Output Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This OEM module is restricted for use with the specific antenna(s) tested for in this filing. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. Class II permissive change to add host MC11.



Mail To: