FCC ID HFSEFSERIES

Wireless LAN Module

by Quanta Computer Inc

Grantee Code: HFS   Product Code: EFSERIES
Latest application date: 2002-03-08

FCC ID Device Details

FCC IDHFSEFSERIES
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeHFS
Product CodeEFSERIES
Applicant BusinessQuanta Computer Inc 🇹🇼
Related Domains quantatw.com
Equipment ClassWireless LAN Module
Test FirmCompliance Certification Services Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2002-03-08

Exhibits

DocumentTypeAvailableFile
RF waring statement to be included in the user manualRF Exposure Info2002-03-08PDF 130.2 KB
User ManualUsers Manual2002-03-08PDF 2.8 MB
Antenna PhotosInternal Photos2002-03-08PDF 109 KB
Internal PhotosInternal Photos2002-03-08PDF 174 KB
External PhotosExternal Photos2002-03-08PDF 125.1 KB
FCC ID label format on the device and on the final productID Label/Location Info2002-03-08PDF 327.8 KB
Theory of operationOperational Description2002-03-08PDF 291.8 KB
Setup PhotosTest Setup Photos2002-03-08PDF 296.4 KB
Processing GainTest Report2002-03-08PDF 167.2 KB
Test Report 1of 2Test Report2002-03-08PDF 3.2 MB
Test Report 2 of 2Test Report2002-03-08PDF 1.6 MB
Module installation proceduresCover Letter(s)2002-03-08PDF 2.2 MB
Request for cofidentiality letterCover Letter(s)2002-03-08PDF 113.5 KB
Request for module approvalCover Letter(s)2002-03-08PDF 7.3 KB
TCB Q and ACover Letter(s)2002-03-08PDF 9 KB
MPE calculationRF Exposure Info2002-03-08PDF 9.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 26.9 KB
Schematic Diagram Metadata onlySchematicsPDF 90.2 KB

Application Information

Application IDADv8f6mwtO+gKM9Yss/mGQ==
Final Action Date2002-03-08
Application PurposeOriginal Equipment
Applicant FRN0006267215
ModelEFSERIES
Frequency Range2412-2462 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionWireless LAN Module
Responsible PartyJoyce Kuo, joyce.kuo@quantatw.com , +886-3-3272345
Test FirmKurt Chen, Compliance Certification Services Inc., kurt_chen@ccsemc.com.tw , 886-2-86422071
TCB Emailmikekuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModule Approval. Output power is conducted. This modular transmitter is approved for use in personal computers as mobile device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The grantee must provide OEM integrators with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna.

Applications

Application IDDatePurpose
ADv8f6mwtO+gKM9Yss/mGQ==2002-03-08Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.033000015C

Grants

TCB Grant - Application ADv8f6mwtO+gKM9Yss/mGQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/08/2002

Application Dated: 03/08/2002
Quanta Computer Inc
No. 188, Wenhua 2nd Road, Guishan District
Taoyuan City, 33377
Taiwan
 
Attention: Joyce Kuo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HFSEFSERIES
Name of Grantee:  Quanta Computer Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless LAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.033  

Module Approval. Output power is conducted. This modular transmitter is approved for use in personal computers as mobile device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The grantee must provide OEM integrators with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna.

EAS Grant - Application ADv8f6mwtO+gKM9Yss/mGQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Quanta Computer Inc
No. 188, Wenhua 2nd Road, Guishan District
Taoyuan City, 33377
Taiwan
  Date of Grant: 03/08/2002

Application Dated: 03/08/2002
 
Attention: Joyce Kuo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HFSEFSERIES
Name of Grantee:  Quanta Computer Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless LAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.033  

Module Approval. Output power is conducted. This modular transmitter is approved for use in personal computers as mobile device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The grantee must provide OEM integrators with installation and operating instructions for satisfying RF exposure requirements. The Grantee must inform second manufacturers/installers that in order for this module to be operated in any configuration other than that permitted in the preceding sentences, a separate FCC equipment authorization must be obtained for each device into which this module is installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Instructions must be provided by the Grantee to the second manufacturer/installer that describe how this module must be installed into a final product in such a manner that only the authorized antenna(s) is (are) used. If the second manufacturer/installer desires to use an antenna with this module that has not been previously approved for use with it, then the Grantee must file a Class II permissive change to approve the new antenna with the module. Alternatively, the second manufacturer/installer may obtain a separate FCC equipment authorization for the module and the new antenna.



Mail To: