FCC ID HLZ9260NG
IntelDual Band Wireless-AC 9260
by Acer Incorporated
Grantee Code: HLZ Product Code: 9260NG
Latest application date: 2019-04-26
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-04-26 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-04-26 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-04-26 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-03-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-03-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-03-20 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 | 2019-02-11 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 | 2019-02-11 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 | 2019-02-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2019-10-21 | PDF 4.1 MB |
| Users Manual_Safety Guide | Users Manual | 2019-10-21 | PDF 1,002.3 KB |
| Users Manual | Users Manual | 2019-09-15 | PDF 4.1 MB |
| Users Manual | Users Manual | 2019-07-31 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2019-10-21 | PDF 846 KB |
| Internal Photos | Internal Photos | 2019-09-15 | PDF 1.1 MB |
| External Photos | External Photos | 2019-10-21 | PDF 720.9 KB |
| External Photos | External Photos | 2019-09-15 | PDF 834.7 KB |
| External Photos | External Photos | 2019-07-31 | PDF 242.5 KB |
| External photo | External Photos | 2019-07-31 | PDF 242.5 KB |
| ID Label/Location Info | ID Label/Location Info | 2019-04-26 | PDF 100.7 KB |
| ID Label/Location Info | ID Label/Location Info | 2019-03-20 | PDF 15.2 KB |
| ID Label/Location Info | ID Label/Location Info | 2019-02-11 | PDF 99 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2019-10-21 | PDF 367.4 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2019-09-15 | PDF 402.3 KB |
| SAR Test Report | RF Exposure Info | 2019-04-26 | PDF 670.8 KB |
| SAR Test Report_revised0429 | RF Exposure Info | 2019-04-26 | PDF 670.5 KB |
| SAR Test Report | RF Exposure Info | 2019-03-20 | PDF 656.5 KB |
| Class II permissive change letter | Cover Letter(s) | 2019-04-26 | PDF 36.8 KB |
| Confidentiality | Cover Letter(s) | 2019-04-26 | PDF 7.7 KB |
| Declaration of authorization | Cover Letter(s) | 2019-04-26 | PDF 13.8 KB |
| Authorization letter | Cover Letter(s) | 2019-03-20 | PDF 20.1 KB |
| Class II permissive change letter | Cover Letter(s) | 2019-03-20 | PDF 34.2 KB |
| Confidentiality | Cover Letter(s) | 2019-03-20 | PDF 49.1 KB |
| Declaration of authorization | Cover Letter(s) | 2019-03-20 | PDF 5.4 KB |
| Authorization Letter | Cover Letter(s) | 2019-02-11 | PDF 20.1 KB |
| Declaration of authorization | Cover Letter(s) | 2019-02-11 | PDF 5.4 KB |
| New grantee FCC Auth Ltr for Change of ID | Cover Letter(s) | 2019-02-11 | PDF 5.6 KB |
| Original granteeFCC Auth Ltr for Change of ID | Cover Letter(s) | 2019-02-11 | PDF 81.8 KB |
| Original granteeFCC Auth Ltr for Change of ID_9260NGW | Cover Letter(s) | 2019-02-11 | PDF 81.8 KB |
| confidentiality | Cover Letter(s) | 2019-02-11 | PDF 7.6 KB |
| SAR_Appendix B_DAE Probe Cal. Certificate | RF Exposure Info | 2019-04-26 | PDF 1.5 MB |
| SAR_Appendix C_Phantom Description Dipole Cal. Certificate | RF Exposure Info | 2019-04-26 | PDF 1.9 MB |
| Appendix B_DAE Probe Cal. Certificate | RF Exposure Info | 2019-03-20 | PDF 863.1 KB |
| Appendix C_Phantom Description Dipole Cal. Certificate | RF Exposure Info | 2019-03-20 | PDF 1.8 MB |
| Antenna Report Metadata only | Operational Description | PDF 1.4 MB | |
| Antenna Report Metadata only | Operational Description | PDF 1.3 MB |
Application Information
| Application ID | qDBvZxrngbpQZdnC+ETuuA== |
|---|---|
| Final Action Date | 2019-04-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013355508 |
| Model | 9260NG |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | IntelDual Band Wireless-AC 9260 |
| Responsible Party | Harriot S.L. Lee, Manager, Harriot.Lee@acer.com  , 886-2-6606-3131 |
| Technical Contact | Jim Chang, SGS Taiwan Ltd., Jim.chang@sgs.com  , 886222993279 |
| Non-Technical Contact | Jim Chang, SGS Taiwan Ltd., Jim.chang@sgs.com , 886222993279 |
| Test Firm | Hank Lee, Compliance Certification Services Inc. Wugu Lab., hank.lee@sgs.com , 886-2-2299-9720 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/21/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC: Adding hosts (Host Brand: acer, Model: SF714-52T) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.28W/kg respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| qDBvZxrngbpQZdnC+ETuuA== | 2019-04-26 | Class II permissive change or modification of presently authorized equipment |
| FO67Rfgc8G9eSW7vqRvZpQ== | 2019-04-26 | Class II permissive change or modification of presently authorized equipment |
| AqynTJp3X/NqvELujmIOQw== | 2019-04-26 | Class II permissive change or modification of presently authorized equipment |
| xy4G6Z82K5OzOYTOcG/8Ww== | 2019-03-20 | Class II permissive change or modification of presently authorized equipment |
| uUcPrk+c9jjWnGLtq3UIZA== | 2019-03-20 | Class II permissive change or modification of presently authorized equipment |
| Kteu18fVFKKC1KqeB8j0hw== | 2019-03-20 | Class II permissive change or modification of presently authorized equipment |
| naybg0oECM8lsZiUiR0CSw== | 2019-02-11 | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 |
| WqLHKFyq43iHAigEAbOhUw== | 2019-02-11 | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 |
| OofMZXcnsVyIt6xsAda+lQ== | 2019-02-11 | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 |
| OPas1CVpVvc9otPLWVQDXA== | 2019-02-11 | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.0140000 | 15C | CC |
| 2402-2480 MHz | 0.01 | 15C | CC |
| 2412-2472 MHz | 0.984 | 15C | CC, MO |
| 2422-2462 MHz | 0.43 | 15C | CC, MO |
| 5190-5230 MHz | 0.134 | 15E | CC, MO |
| 5210 MHz | 0.062 | 15E | CC, MO |
| 5260-5320 MHz | 0.229 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.11 | 15E | CC, MO, ND |
| 5290 MHz | 0.052 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.198 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.221 | 15E | CC, MO, ND |
| 5530-5690 MHz | 0.232 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.299 | 15E | CC, MO |
| 5755-5795 MHz | 0.198 | 15E | CC, MO |
| 5775 MHz | 0.148 | 15E | CC, MO |
Grants
TCB Grant - Application xy4G6Z82K5OzOYTOcG/8Ww==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/20/2019 Application Dated: 03/18/2019 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.11 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.198 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.221 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.232 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| C2PC: Adding hosts (Host Brand: acer, Model: SF714-52T) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 0.41W/kg and 0.62W/kg respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application xy4G6Z82K5OzOYTOcG/8Ww==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 03/20/2019 Application Dated: 03/18/2019 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.11 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.198 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.221 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.232 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| C2PC: Adding hosts (Host Brand: acer, Model: SF714-52T) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 0.41W/kg and 0.62W/kg respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/11/2019 Application Dated: 01/31/2019 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application WqLHKFyq43iHAigEAbOhUw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 02/11/2019 Application Dated: 01/31/2019 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/20/2019 Application Dated: 03/18/2019 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| C2PC: Adding hosts (Host Brand: acer, Model: SF714-52T) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 0.43W/kg respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application uUcPrk+c9jjWnGLtq3UIZA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 03/20/2019 Application Dated: 03/18/2019 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| C2PC: Adding hosts (Host Brand: acer, Model: SF714-52T) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 0.43W/kg respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/26/2019 Application Dated: 04/23/2019 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IntelDual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.11 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.198 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.221 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.232 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| C2PC: Adding hosts (Host Brand: acer, Model: SF714-52T) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.28W/kg respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application qDBvZxrngbpQZdnC+ETuuA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 04/26/2019 Application Dated: 04/23/2019 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IntelDual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.11 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.198 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.221 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.232 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| C2PC: Adding hosts (Host Brand: acer, Model: SF714-52T) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.28W/kg respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/11/2019 Application Dated: 01/31/2019 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application OPas1CVpVvc9otPLWVQDXA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 02/11/2019 Application Dated: 01/31/2019 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/11/2019 Application Dated: 01/31/2019 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application OofMZXcnsVyIt6xsAda+lQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 02/11/2019 Application Dated: 01/31/2019 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/11/2019 Application Dated: 01/31/2019 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.11 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.198 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.221 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.232 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application naybg0oECM8lsZiUiR0CSw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 02/11/2019 Application Dated: 01/31/2019 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.11 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.198 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.221 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.232 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/20/2019 Application Dated: 03/18/2019 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| C2PC: Adding hosts (Host Brand: acer, Model: SF714-52T) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 0.42W/kg respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Kteu18fVFKKC1KqeB8j0hw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 03/20/2019 Application Dated: 03/18/2019 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Dual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| C2PC: Adding hosts (Host Brand: acer, Model: SF714-52T) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 0.42W/kg respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/26/2019 Application Dated: 04/23/2019 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | IntelDual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| C2PC: Adding hosts (Host Brand: acer, Model: N19P1) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 0.88W/kg and 1.44W/kg respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application FO67Rfgc8G9eSW7vqRvZpQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 04/26/2019 Application Dated: 04/23/2019 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | IntelDual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| C2PC: Adding hosts (Host Brand: acer, Model: N19P1) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 0.88W/kg and 1.44W/kg respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/26/2019 Application Dated: 04/23/2019 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IntelDual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| C2PC: Adding hosts (Host Brand: acer, Model: N19P1) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 0.12 W/kg and 1.28 W/kg respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application AqynTJp3X/NqvELujmIOQw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 04/26/2019 Application Dated: 04/23/2019 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZ9260NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IntelDual Band Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| C2PC: Adding hosts (Host Brand: acer, Model: N19P1) and antennas. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR has been evaluated at 0 mm. The highest reported Body and Simultaneous SAR values are 0.12 W/kg and 1.28 W/kg respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |