FCC ID HLZAI7921W
2TX 11ax (WiFi6) + BLE Combo Card
by Acer Incorporated
Grantee Code: HLZ Product Code: AI7921W
Latest application date: 2021-06-15
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-06-15 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-06-15 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-06-15 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: HLZMT7921 Grant Date: 02/25/2021 | 2021-03-18 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: HLZMT7921 Grant Date: 02/25/2021 | 2021-03-18 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: HLZMT7921 Grant Date: 02/25/2021 | 2021-03-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2021-11-22 | PDF 2.1 MB |
| User manual-Safety Guide | Users Manual | 2021-11-22 | PDF 1 MB |
| Internal Photos | Internal Photos | 2021-11-22 | PDF 1.1 MB |
| External Photos | External Photos | 2021-11-22 | PDF 849.6 KB |
| External Photos | External Photos | 2021-09-09 | PDF 272.8 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-06-15 | PDF 253.1 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-03-18 | PDF 4.8 KB |
| Test Setup Photos_BLE | Test Setup Photos | 2021-11-22 | PDF 412.8 KB |
| Test Setup Photos_BT | Test Setup Photos | 2021-11-22 | PDF 382.4 KB |
| Test Setup Photos_NII | Test Setup Photos | 2021-11-22 | PDF 564.7 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2021-11-22 | PDF 1.3 MB |
| Test Setup Photos_WLAN | Test Setup Photos | 2021-11-22 | PDF 557.4 KB |
| Test Report | Test Report | 2021-06-15 | PDF 4.2 MB |
| Test Report | Test Report | 2021-06-15 | PDF 1.5 MB |
| Test Report_BLE | Test Report | 2021-06-15 | PDF 1.5 MB |
| Test Report_SAR | RF Exposure Info | 2021-06-15 | PDF 848.4 KB |
| Test Report_WLAN | Test Report | 2021-06-15 | PDF 3.5 MB |
| Authorization letter | Cover Letter(s) | 2021-06-15 | PDF 20.1 KB |
| Class II permissive change letter | Cover Letter(s) | 2021-06-15 | PDF 58 KB |
| Confidentiality | Cover Letter(s) | 2021-06-15 | PDF 116.2 KB |
| Declaration of authorization | Cover Letter(s) | 2021-06-15 | PDF 104.4 KB |
| Declaration of authorization | Cover Letter(s) | 2021-03-18 | PDF 104.5 KB |
| Declaration of authorization revised | Cover Letter(s) | 2021-03-18 | PDF 104.5 KB |
| FCC Auth Ltr for Change of ID | Cover Letter(s) | 2021-03-18 | PDF 32.4 KB |
| Request for LT or STC confidentiality | Cover Letter(s) | 2021-03-18 | PDF 116.3 KB |
| Appendix B_DAE _ Probe Cal. Certificate | RF Exposure Info | 2021-06-15 | PDF 890.9 KB |
| Appendix C_Phantom Description _ Dipole Cal. Certificate | RF Exposure Info | 2021-06-15 | PDF 1.6 MB |
| Antenna test report Metadata only | Operational Description | PDF 2.6 MB |
Application Information
| Application ID | sXyz+yBzSU9lCyQZYf3kuA== |
|---|---|
| Final Action Date | 2021-06-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013355508 |
| Model | AI7921W |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 2TX 11ax (WiFi6) + BLE Combo Card |
| Responsible Party | Harriot S.L. Lee, Manager, Harriot.Lee@acer.com  , 886-2-6606-3131 |
| Technical Contact | Jim Chang, SGS Taiwan Ltd., jim.chang@sgs.com  , 886222993279 |
| Non-Technical Contact | Jim Chang, SGS Taiwan Ltd., jim.chang@sgs.com , 886222993279 |
| Test Firm | Tommy Wu, SGS Taiwan Ltd. Electromagnetic Compatibility Lab, Tommy.wu1@sgs.com , 886222993279 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 11/22/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N19W3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 1.59 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| sXyz+yBzSU9lCyQZYf3kuA== | 2021-06-15 | Class II permissive change or modification of presently authorized equipment |
| dpKgLwXss6Mp9dXL4dw80Q== | 2021-06-15 | Class II permissive change or modification of presently authorized equipment |
| FiQg4lhxnL+TZ6i0fgDqSg== | 2021-06-15 | Class II permissive change or modification of presently authorized equipment |
| NkBAY9ZTJDag3AlQOZm1LA== | 2021-03-18 | Change in identification of presently authorized equipment. Original FCC ID: HLZMT7921 Grant Date: 02/25/2021 |
| CN9eg69r/xiqxaxybONcIQ== | 2021-03-18 | Change in identification of presently authorized equipment. Original FCC ID: HLZMT7921 Grant Date: 02/25/2021 |
| 46Wriudlav/ftH78Rw008w== | 2021-03-18 | Change in identification of presently authorized equipment. Original FCC ID: HLZMT7921 Grant Date: 02/25/2021 |
Equipment Authorization
Grants
TCB Grant - Application sXyz+yBzSU9lCyQZYf3kuA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 06/15/2021 Application Dated: 05/25/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAI7921W |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N19W3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 1.59 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application sXyz+yBzSU9lCyQZYf3kuA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 06/15/2021 Application Dated: 05/25/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAI7921W |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N19W3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 1.59 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/18/2021 Application Dated: 03/12/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAI7921W |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application NkBAY9ZTJDag3AlQOZm1LA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 03/18/2021 Application Dated: 03/12/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAI7921W |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 06/15/2021 Application Dated: 05/25/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAI7921W |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N19W3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.36 W/kg and 1.18 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application FiQg4lhxnL+TZ6i0fgDqSg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 06/15/2021 Application Dated: 05/25/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAI7921W |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N19W3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.36 W/kg and 1.18 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 06/15/2021 Application Dated: 05/25/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAI7921W |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N19W3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.2 W/kg and 1.12 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application dpKgLwXss6Mp9dXL4dw80Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 06/15/2021 Application Dated: 05/25/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAI7921W |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N19W3) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.2 W/kg and 1.12 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/18/2021 Application Dated: 03/12/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAI7921W |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application CN9eg69r/xiqxaxybONcIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 03/18/2021 Application Dated: 03/12/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAI7921W |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/18/2021 Application Dated: 03/12/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAI7921W |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 46Wriudlav/ftH78Rw008w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 03/18/2021 Application Dated: 03/12/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAI7921W |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |