FCC ID HLZAX201NGQ
WLAN+Bluetooth module AX201NGW
by Acer Incorporated
Grantee Code: HLZ Product Code: AX201NGQ
Latest application date: 2021-05-13
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-05-13 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-05-13 |
| 5180-5250 MHz | Class II permissive change or modification of presently authorized equipment | 2021-05-13 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: HLZAX201NG Grant Date: 06/24/2019 | 2021-03-19 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: HLZAX201NG Grant Date: 06/24/2019 | 2021-03-19 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: HLZAX201NG Grant Date: 06/24/2019 | 2021-03-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Safety Guide_Acer_1.0_A_A | Users Manual | 2021-11-01 | PDF 980.6 KB |
| User Manual | Users Manual | 2021-11-01 | PDF 1.3 MB |
| Internal photo | Internal Photos | 2021-11-01 | PDF 1.1 MB |
| External photo | External Photos | 2021-11-01 | PDF 596.2 KB |
| External Photos | External Photos | 2021-09-12 | PDF 276.6 KB |
| Label _ Location | ID Label/Location Info | 2021-05-13 | PDF 239 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-03-19 | PDF 6.7 KB |
| EN202120012 FCC SAR_Appendix A_Photographs | Test Setup Photos | 2021-11-01 | PDF 684.9 KB |
| SAR Test report | RF Exposure Info | 2021-05-13 | PDF 1.7 MB |
| Authorization letter | Cover Letter(s) | 2021-05-13 | PDF 20.1 KB |
| Confidentiality | Cover Letter(s) | 2021-05-13 | PDF 15.5 KB |
| Declaration of authorization | Cover Letter(s) | 2021-05-13 | PDF 11.5 KB |
| FCC Class II permissive change letter | Cover Letter(s) | 2021-05-13 | PDF 60.4 KB |
| Declaration of authorization | Cover Letter(s) | 2021-03-19 | PDF 11.4 KB |
| FCC Auth Ltr for Change of ID | Cover Letter(s) | 2021-03-19 | PDF 12.2 KB |
| Request for LT or STC confidentiality | Cover Letter(s) | 2021-03-19 | PDF 15.5 KB |
| SAR_Appendix B_DAE _ Probe Cal. Certificate | RF Exposure Info | 2021-05-13 | PDF 1.2 MB |
| SAR_Appendix C_Phantom Description _ Dipole Cal. Certificate | RF Exposure Info | 2021-05-13 | PDF 1.8 MB |
| Tambourine_ZBKA_ C Build WLAN sku Antenna test report Metadata only | Operational Description | PDF 2.2 MB |
Application Information
| Application ID | ta8/5GbkHJil7689h772Kw== |
|---|---|
| Final Action Date | 2021-05-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013355508 |
| Model | AX201NGQ |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WLAN+Bluetooth module AX201NGW |
| Responsible Party | Harriot S.L. Lee, Manager, Harriot.Lee@acer.com  , 886-2-6606-3131 |
| Technical Contact | Jim Chang, SGS Taiwan Ltd., jim.chang@sgs.com  , 886222993279 |
| Non-Technical Contact | Jim Chang, SGS Taiwan Ltd., jim.chang@sgs.com , 886222993279 |
| Test Firm | Nawfal ASRIH, Intel Corporation S.A.S., nawfal.asrih@intel.com  , 003349300962 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 11/01/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N20Q14) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.21 W/kg and 0.66 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ta8/5GbkHJil7689h772Kw== | 2021-05-13 | Class II permissive change or modification of presently authorized equipment |
| iJO7njreShMVJbEW3K6gzA== | 2021-05-13 | Class II permissive change or modification of presently authorized equipment |
| Hc0fuxXqR019FeNHfYPSOg== | 2021-05-13 | Class II permissive change or modification of presently authorized equipment |
| ajekPGjhRPWl7D9X3ZVgng== | 2021-03-19 | Change in identification of presently authorized equipment. Original FCC ID: HLZAX201NG Grant Date: 06/24/2019 |
| BQ4dA/oaBBczRSBTMYaI2Q== | 2021-03-19 | Change in identification of presently authorized equipment. Original FCC ID: HLZAX201NG Grant Date: 06/24/2019 |
| 7Nu/xfyuMHi/+maWI+B7sw== | 2021-03-19 | Change in identification of presently authorized equipment. Original FCC ID: HLZAX201NG Grant Date: 06/24/2019 |
| 0H+xNirGloAkctb7tlaTNg== | 2021-03-19 | Change in identification of presently authorized equipment. Original FCC ID: HLZAX201NG Grant Date: 06/24/2019 |
Equipment Authorization
Grants
TCB Grant - Application ta8/5GbkHJil7689h772Kw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/13/2021 Application Dated: 05/04/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N20Q14) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.21 W/kg and 0.66 W/kg, respectively.
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ta8/5GbkHJil7689h772Kw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 05/13/2021 Application Dated: 05/04/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N20Q14) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.21 W/kg and 0.66 W/kg, respectively.
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/13/2021 Application Dated: 05/04/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N20Q14) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.06 W/kg and 0.31 W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application iJO7njreShMVJbEW3K6gzA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 05/13/2021 Application Dated: 05/04/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N20Q14) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.06 W/kg and 0.31 W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/13/2021 Application Dated: 05/04/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.133 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N20Q14) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.16 W/kg and 0.72 W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Hc0fuxXqR019FeNHfYPSOg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 05/13/2021 Application Dated: 05/04/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.133 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : acer/ N20Q14) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.16 W/kg and 0.72 W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/19/2021 Application Dated: 03/15/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N20Q14) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.33 W/kg and 0.58 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application BQ4dA/oaBBczRSBTMYaI2Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 03/19/2021 Application Dated: 03/15/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.133 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.135 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.149 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.134 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N20Q14) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.33 W/kg and 0.58 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/19/2021 Application Dated: 03/15/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ajekPGjhRPWl7D9X3ZVgng==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 03/19/2021 Application Dated: 03/15/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.986 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.34W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/19/2021 Application Dated: 03/15/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 7Nu/xfyuMHi/+maWI+B7sw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 03/19/2021 Application Dated: 03/15/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/19/2021 Application Dated: 03/15/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 0H+xNirGloAkctb7tlaTNg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 03/19/2021 Application Dated: 03/15/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZAX201NGQ |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN+Bluetooth module AX201NGW |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |