1. FCC ID
  2. HLZ
  3. HLZGOBI2000A

FCC ID HLZGOBI2000A

3G MODULE

by Acer Incorporated

Grantee Code: HLZ   Product Code: GOBI2000A
Latest application date: 2011-06-27

FCC ID Device Details

FCC IDHLZGOBI2000A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeHLZ
Product CodeGOBI2000A
Applicant BusinessAcer Incorporated 🇹🇼
Related Domains acer.com.tw
Equipment Class3G MODULE
Test FirmSporton International Inc.

Linked Records

Barcode records decoded from published FCC label exhibits or linked by an explicit FCC ID reference on a product page.

UPC / GTINLinked product
7898915959871
EAN-13 · GTIN-14 07898915959871
3G MODULE
Brand: Acer Incorporated · Model: GOBI2000A
Source: FCC label

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2011-06-27
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2010-07-07
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2009-11-16
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2009-09-01
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2009-08-17
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2009-06-09
824.2-848.8 MHzChange in identification of presently authorized equipment. Original FCC ID: J9CGOBI2000 Grant Date: 01/06/20092009-03-26

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2011-06-27PDF 2.4 MB
Users ManualUsers Manual2011-01-02PDF 1.8 MB
Users Manual 1Users Manual2009-12-28PDF 849.7 KB
Users Manual 2Users Manual2009-12-28PDF 2.4 MB
Users Manual 1Users Manual2009-10-15PDF 849.7 KB
Users Manual 2Users Manual2009-10-15PDF 2.4 MB
Host user manualUsers Manual2009-06-09PDF 3.4 MB
Internal PhotosInternal Photos2011-12-24PDF 605.7 KB
Internal PhotosInternal Photos2011-01-02PDF 1.9 MB
PhotographsInternal Photos2009-12-28PDF 1.2 MB
Internal PhotosInternal Photos2009-10-15PDF 1.3 MB
External PhotosExternal Photos2011-12-24PDF 1.2 MB
External PhotosExternal Photos2011-01-02PDF 1.9 MB
PhotographsExternal Photos2009-12-28PDF 1.2 MB
External PhotosExternal Photos2009-10-15PDF 1.3 MB
Photographs KAV60External Photos2009-09-04PDF 3.8 MB
Photographs ZG8External Photos2009-09-04PDF 1.3 MB
External photos of the hostExternal Photos2009-06-09PDF 591 KB
External photosExternal Photos2009-03-26PDF 100.2 KB
Label LocationID Label/Location Info2011-06-27PDF 516.8 KB
Label SampleID Label/Location Info2011-06-27PDF 436.6 KB
Label LocationID Label/Location Info2010-07-07PDF 56 KB
Label SampleID Label/Location Info2010-07-07PDF 427.9 KB
Label Sample BTID Label/Location Info2010-07-07PDF 626 KB
Label Sample WLANID Label/Location Info2010-07-07PDF 165.5 KB
Label Sample BT ModuleID Label/Location Info2009-11-16PDF 420.4 KB
Label Sample RatingID Label/Location Info2009-11-16PDF 437.3 KB
Label Sample WLAN AR5B93ID Label/Location Info2009-11-16PDF 98.6 KB
Label Sample WLAN AR5B95ID Label/Location Info2009-11-16PDF 165.5 KB
Label LocationID Label/Location Info2009-09-01PDF 56 KB
Label SampleID Label/Location Info2009-09-01PDF 427.9 KB
Label Sample BTID Label/Location Info2009-09-01PDF 35 KB
Label Sample WLANID Label/Location Info2009-09-01PDF 84.8 KB
Label Sample ContainedID Label/Location Info2009-08-17PDF 559.1 KB
Label Sample KAV60ID Label/Location Info2009-08-17PDF 401.2 KB
Label Sample KAV80ID Label/Location Info2009-08-17PDF 521.8 KB
Label Sample KAVA0ID Label/Location Info2009-08-17PDF 399.6 KB
Label Sample ZA3ID Label/Location Info2009-08-17PDF 321.9 KB
Label Sample ZA5 ZA6ID Label/Location Info2009-08-17PDF 1.5 MB
Label Sample ZG8ID Label/Location Info2009-08-17PDF 644.4 KB
Label format of the hostID Label/Location Info2009-06-09PDF 594.9 KB
Label format and locationID Label/Location Info2009-03-26PDF 116.6 KB
Test Setup PhotosTest Setup Photos2011-12-24PDF 162.3 KB
RF Exposure PhotosTest Setup Photos2011-01-02PDF 599.9 KB
Test Setup PhotosTest Setup Photos2011-01-02PDF 264.5 KB
RF Exposure PhotosTest Setup Photos2009-12-28PDF 132.8 KB
Test Setup PhotosTest Setup Photos2009-12-28PDF 243.1 KB
RF Exposure PhotosTest Setup Photos2009-10-15PDF 164.4 KB
Test Setup PhotosTest Setup Photos2009-10-15PDF 68.8 KB
RF Exposure Photos KAV60Test Setup Photos2009-09-04PDF 1.3 MB
RF Exposure Photos ZG8Test Setup Photos2009-09-04PDF 863.4 KB
Test Setup Photos KAV60Test Setup Photos2009-09-04PDF 431 KB
Test Setup Photos ZG8Test Setup Photos2009-09-04PDF 203.8 KB
Test ReportTest Report2011-06-27PDF 497.9 KB
Test ReportTest Report2010-07-07PDF 4.6 MB
Antenna ReportTest Report2009-11-16PDF 2 MB
Conducted ReportTest Report2009-11-16PDF 1.3 MB
RF ExposureRF Exposure Info2009-11-16PDF 1,004.3 KB
RF Exposure Appendix FRF Exposure Info2009-11-16PDF 221.8 KB
Test ReportTest Report2009-11-16PDF 1.1 MB
RF ExposureRF Exposure Info2009-09-01PDF 606.4 KB
RF Exposure Appendix FRF Exposure Info2009-09-01PDF 201.6 KB
Test ReportTest Report2009-09-01PDF 820.3 KB
Conducted ReportTest Report2009-08-17PDF 1.3 MB
RF Exposure Appendix F KAV60RF Exposure Info2009-08-17PDF 409.5 KB
RF Exposure Appendix F KAV80RF Exposure Info2009-08-17PDF 202.9 KB
RF Exposure Appendix F KAVA0RF Exposure Info2009-08-17PDF 202.8 KB
RF Exposure Appendix F ZA3RF Exposure Info2009-08-17PDF 224.4 KB
RF Exposure Appendix F ZA5 ZA6RF Exposure Info2009-08-17PDF 224.2 KB
RF Exposure Appendix F ZG8RF Exposure Info2009-08-17PDF 224.4 KB
RF Exposure KAV60RF Exposure Info2009-08-17PDF 512 KB
RF Exposure KAV80RF Exposure Info2009-08-17PDF 487.8 KB
RF Exposure KAVA0RF Exposure Info2009-08-17PDF 487.4 KB
RF Exposure ZA3RF Exposure Info2009-08-17PDF 824.2 KB
RF Exposure ZA5 ZA6RF Exposure Info2009-08-17PDF 761.9 KB
RF Exposure ZG8RF Exposure Info2009-08-17PDF 828.9 KB
Test Report KAV60Test Report2009-08-17PDF 976.5 KB
Test Report KAV80Test Report2009-08-17PDF 843.8 KB
Test Report KAVA0Test Report2009-08-17PDF 825.1 KB
Test Report ZA3Test Report2009-08-17PDF 1.2 MB
Test Report ZA5 ZA6Test Report2009-08-17PDF 1.2 MB
Test Report ZG8Test Report2009-08-17PDF 1.1 MB
Class II Change LetterCover Letter(s)2011-06-27PDF 216.9 KB
Cover Letter Request for ReassessmentCover Letter(s)2011-06-27PDF 185.1 KB
DOC LetterCover Letter(s)2011-06-27PDF 167.7 KB
POACover Letter(s)2011-06-27PDF 254.8 KB
Short Term Confidential LetterCover Letter(s)2011-06-27PDF 218.5 KB
Class II Change LetterCover Letter(s)2010-07-07PDF 17.4 KB
DOC LetterCover Letter(s)2010-07-07PDF 15.3 KB
Declaration LetterCover Letter(s)2010-07-07PDF 15.5 KB
POACover Letter(s)2010-07-07PDF 18.6 KB
Short Term Confidential LetterCover Letter(s)2010-07-07PDF 20.2 KB
Class II Change LetterCover Letter(s)2009-11-16PDF 17.8 KB
DOC LetterCover Letter(s)2009-11-16PDF 17.4 KB
POACover Letter(s)2009-11-16PDF 18.7 KB
Short Term Confidential LetterCover Letter(s)2009-11-16PDF 23 KB
Class II Change LetterCover Letter(s)2009-09-01PDF 18.1 KB
Confidential LetterCover Letter(s)2009-09-01PDF 16.9 KB
DOC LetterCover Letter(s)2009-09-01PDF 17.4 KB
Power of AttorneyCover Letter(s)2009-09-01PDF 18.7 KB
Short Term Confidential LetterCover Letter(s)2009-09-01PDF 23 KB
Class II Change LetterCover Letter(s)2009-08-17PDF 18.3 KB
Confidential LetterCover Letter(s)2009-08-17PDF 18.7 KB
Declaration LetterCover Letter(s)2009-08-17PDF 22.4 KB
POACover Letter(s)2009-08-17PDF 18.7 KB
Authorization letterCover Letter(s)2009-06-09PDF 21.2 KB
C2PC letterCover Letter(s)2009-06-09PDF 53 KB
Host model difference letterCover Letter(s)2009-06-09PDF 34.2 KB
Authorization letterCover Letter(s)2009-03-26PDF 18.6 KB
Multiple listing request letterCover Letter(s)2009-03-26PDF 19.1 KB
Qualcomm authorization letterCover Letter(s)2009-03-26PDF 18 KB
RF ExposureRF Exposure Info2011-06-27PDF 308.7 KB
RF ExposureRF Exposure Info2010-07-07PDF 934.4 KB
RF Exposure Appendix ARF Exposure Info2010-07-07PDF 143.2 KB
RF Exposure Appendix BRF Exposure Info2010-07-07PDF 177.2 KB
RF Exposure Appendix CRF Exposure Info2010-07-07PDF 3.5 MB
RF Exposure Appendix FRF Exposure Info2010-07-07PDF 118.2 KB
RF Exposure Appendix BRF Exposure Info2009-11-16PDF 348.1 KB
RF Exposure Appendix CRF Exposure Info2009-11-16PDF 2.6 MB
RF Expousre Appendix ARF Exposure Info2009-11-16PDF 267.4 KB
RF Exposure Appendix ARF Exposure Info2009-09-01PDF 89.7 KB
RF Exposure Appendix BRF Exposure Info2009-09-01PDF 189.9 KB
RF Exposure Appendix CRF Exposure Info2009-09-01PDF 3.6 MB
RF Exposure Appendix A KAV60RF Exposure Info2009-08-17PDF 125.4 KB
RF Exposure Appendix A KAV80RF Exposure Info2009-08-17PDF 90.5 KB
RF Exposure Appendix A KAVA0RF Exposure Info2009-08-17PDF 131.9 KB
RF Exposure Appendix A ZA3RF Exposure Info2009-08-17PDF 89.5 KB
RF Exposure Appendix A ZA5 ZA6RF Exposure Info2009-08-17PDF 90.5 KB
RF Exposure Appendix A ZG8RF Exposure Info2009-08-17PDF 89.5 KB
RF Exposure Appendix B KAV60RF Exposure Info2009-08-17PDF 187.6 KB
RF Exposure Appendix B KAV80RF Exposure Info2009-08-17PDF 201.6 KB
RF Exposure Appendix B KAVA0RF Exposure Info2009-08-17PDF 191.9 KB
RF Exposure Appendix B ZA3RF Exposure Info2009-08-17PDF 150.6 KB
RF Exposure Appendix B ZA5 ZA6RF Exposure Info2009-08-17PDF 172.3 KB
RF Exposure Appendix B ZG8RF Exposure Info2009-08-17PDF 166.4 KB
RF Exposure Appendix C KAV60RF Exposure Info2009-08-17PDF 3.3 MB
RF Exposure Appendix C KAV80RF Exposure Info2009-08-17PDF 2.6 MB
RF Exposure Appendix C KAVA0RF Exposure Info2009-08-17PDF 2.6 MB
RF Exposure Appendix C ZA3RF Exposure Info2009-08-17PDF 2.9 MB
RF Exposure Appendix C ZA5 ZA6RF Exposure Info2009-08-17PDF 2.6 MB
RF Exposure Appendix C ZG8RF Exposure Info2009-08-17PDF 2.9 MB
RF Exposure infoRF Exposure Info2009-06-09PDF 246.5 KB

Application Information

Application IDdMu/7Il74dRy40y/ogLnfw==
Final Action Date2011-06-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0013355508
ModelGOBI2000A
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device Description3G MODULE
Responsible PartyHarriot S.L. Lee, Manager, Harriot_Lee@acer.com.tw , 886-2-6606-3131
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/24/2011
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CLASS II CHANGE: This Class II Change adds a new laptop configuration/ model name NAV80. This device is approved for collocation with Bluetooth Module FCC ID: PPDT77H056, and WLAN Module FCC ID: HLZ-AR5B95. GSM and WCDMA functions 824.2 – 848.8 MHz, 1850.2 – 1909.8 MHz, 826.24 – 846.6 MHz, 1852.4 – 1907.5 MHz have been disabled in this Model. Highest radiated power measured in this specific configuration: Part 22 ERP 0.09W; Part 24 0.25W. Highest reported body SAR value is 0.09 W/kg. (Date:07/07/2010) Class II Change: This Class II permissive change adds a host configuration Notebook, Model Name: ZGB, Host Trade Name: ACER. Maximum ERP and EIRP for part 22 and 24 are 0.12W and 0.35W, respectively. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except as documented in the filing with already approved modular transmitters FCCID: PPD-AR5BBU12 (Bluetooth) and FCCID: PPD-AR5BHB116 (WLAN).

Applications

Application IDDatePurpose
dMu/7Il74dRy40y/ogLnfw==2011-06-27Class II permissive change or modification of presently authorized equipment
Jg1e0/7UW7dbs2kQKVscIQ==2010-07-07Class II permissive change or modification of presently authorized equipment
cizb6XE0Z5kOpNbLQEl5rQ==2009-11-16Class II permissive change or modification of presently authorized equipment
13iHcr2LTE95DJ1mDitXiA==2009-09-01Class II permissive change or modification of presently authorized equipment
I3N7t3BVFQ5Rc3s65q3h6w==2009-08-17Class II permissive change or modification of presently authorized equipment
GIKjOVCMR89D03vzPijdGA==2009-06-09Class II permissive change or modification of presently authorized equipment
WCtp9FIq2dyucmjB1VacJQ==2009-03-26Change in identification of presently authorized equipment. Original FCC ID: J9CGOBI2000 Grant Date: 01/06/2009

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz1.9192.5ppm248KGXW22H
824.2-848.8 MHz0.5552.5ppm248KG7W22H
824.7-848.31 MHz0.292.5ppm1M28F9W22H
826.4-846.6 MHz0.2622.5ppm4M18F9W22H
1850.2-1909.8 MHz0.8742.5ppm250KGXW24E
1850.2-1909.8 MHz0.3962.5ppm245KG7W24E
1851.25-1908.75 MHz0.2912.5ppm1M28F9W24E
1852.4-1907.5 MHz0.2562.5ppm4M19F9W24E

Grants

TCB Grant - Application WCtp9FIq2dyucmjB1VacJQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 03/26/2009

Application Dated: 03/26/2009
Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: Gobi2000 PCI Express Mini Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application WCtp9FIq2dyucmjB1VacJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan 		  Date of Grant: 03/26/2009

Application Dated: 03/26/2009
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: Gobi2000 PCI Express Mini Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application Jg1e0/7UW7dbs2kQKVscIQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 07/07/2010

Application Dated: 07/06/2010
Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: 3G MODULE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CLASS II CHANGE: This Class II Change adds a new laptop configuration/ model name NAV80. This device is approved for collocation with Bluetooth Module FCC ID: PPDT77H056, and WLAN Module FCC ID: HLZ-AR5B95. GSM and WCDMA functions 824.2 – 848.8 MHz, 1850.2 – 1909.8 MHz, 826.24 – 846.6 MHz, 1852.4 – 1907.5 MHz have been disabled in this Model. Highest radiated power measured in this specific configuration: Part 22 ERP 0.09W; Part 24 0.25W. Highest reported body SAR value is 0.09 W/kg.

EAS Grant - Application Jg1e0/7UW7dbs2kQKVscIQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan 		  Date of Grant: 07/07/2010

Application Dated: 07/06/2010
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: 3G MODULE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CLASS II CHANGE: This Class II Change adds a new laptop configuration/ model name NAV80. This device is approved for collocation with Bluetooth Module FCC ID: PPDT77H056, and WLAN Module FCC ID: HLZ-AR5B95. GSM and WCDMA functions 824.2 – 848.8 MHz, 1850.2 – 1909.8 MHz, 826.24 – 846.6 MHz, 1852.4 – 1907.5 MHz have been disabled in this Model. Highest radiated power measured in this specific configuration: Part 22 ERP 0.09W; Part 24 0.25W. Highest reported body SAR value is 0.09 W/kg.



TCB Grant - Application I3N7t3BVFQ5Rc3s65q3h6w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 08/17/2009

Application Dated: 07/21/2009
Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: 3G MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original grant notes 06/09/2009)

This class 2 permissive change adds new laptop configurations/models: ZA3, ZA5, ZA6, KAV60, KAV80, KAVA0, ZG8. This device is approved for collocation with Bluetooth module FCCID: QDS-BRCM1018 and WLAN module HLZAR5BHB63.

Highest reported body SAR value is: 0.1W/kg.


EAS Grant - Application I3N7t3BVFQ5Rc3s65q3h6w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan 		  Date of Grant: 08/17/2009

Application Dated: 07/21/2009
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: 3G MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original grant notes 06/09/2009)

This class 2 permissive change adds new laptop configurations/models: ZA3, ZA5, ZA6, KAV60, KAV80, KAVA0, ZG8. This device is approved for collocation with Bluetooth module FCCID: QDS-BRCM1018 and WLAN module HLZAR5BHB63.

Highest reported body SAR value is: 0.1W/kg.



TCB Grant - Application GIKjOVCMR89D03vzPijdGA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 06/09/2009

Application Dated: 06/09/2009
Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: Gobi2000 PCI Express Mini Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Class II Permissive Change to add specific mobile host configuration and co-located with Bluetooth and WLAN modules as documented in this filing. Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application GIKjOVCMR89D03vzPijdGA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan 		  Date of Grant: 06/09/2009

Application Dated: 06/09/2009
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: Gobi2000 PCI Express Mini Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Class II Permissive Change to add specific mobile host configuration and co-located with Bluetooth and WLAN modules as documented in this filing. Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application dMu/7Il74dRy40y/ogLnfw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 06/27/2011

Application Dated: 06/27/2011
Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: 3G MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CLASS II CHANGE: This Class II Change adds a new laptop configuration/ model name NAV80. This device is approved for collocation with Bluetooth Module FCC ID: PPDT77H056, and WLAN Module FCC ID: HLZ-AR5B95. GSM and WCDMA functions 824.2 – 848.8 MHz, 1850.2 – 1909.8 MHz, 826.24 – 846.6 MHz, 1852.4 – 1907.5 MHz have been disabled in this Model. Highest radiated power measured in this specific configuration: Part 22 ERP 0.09W; Part 24 0.25W. Highest reported body SAR value is 0.09 W/kg. (Date:07/07/2010) Class II Change: This Class II permissive change adds a host configuration Notebook, Model Name: ZGB, Host Trade Name: ACER. Maximum ERP and EIRP for part 22 and 24 are 0.12W and 0.35W, respectively. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except as documented in the filing with already approved modular transmitters FCCID: PPD-AR5BBU12 (Bluetooth) and FCCID: PPD-AR5BHB116 (WLAN).

EAS Grant - Application dMu/7Il74dRy40y/ogLnfw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan 		  Date of Grant: 06/27/2011

Application Dated: 06/27/2011
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: 3G MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CLASS II CHANGE: This Class II Change adds a new laptop configuration/ model name NAV80. This device is approved for collocation with Bluetooth Module FCC ID: PPDT77H056, and WLAN Module FCC ID: HLZ-AR5B95. GSM and WCDMA functions 824.2 – 848.8 MHz, 1850.2 – 1909.8 MHz, 826.24 – 846.6 MHz, 1852.4 – 1907.5 MHz have been disabled in this Model. Highest radiated power measured in this specific configuration: Part 22 ERP 0.09W; Part 24 0.25W. Highest reported body SAR value is 0.09 W/kg. (Date:07/07/2010) Class II Change: This Class II permissive change adds a host configuration Notebook, Model Name: ZGB, Host Trade Name: ACER. Maximum ERP and EIRP for part 22 and 24 are 0.12W and 0.35W, respectively. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except as documented in the filing with already approved modular transmitters FCCID: PPD-AR5BBU12 (Bluetooth) and FCCID: PPD-AR5BHB116 (WLAN).



TCB Grant - Application cizb6XE0Z5kOpNbLQEl5rQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 11/16/2009

Application Dated: 11/13/2009
Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: 3G MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original grant notes 06/09/2009) This class 2 permissive change add a new laptop configuration/model name: ZA8. This device is approved for collocation with Bluetooth module FCCID: QDS-BRCM1018 and WLAN module HLZ-AR5B95. Highest reported body SAR value is: 0.1W/kg. (Grant Date: 09/01/2009) This class 2 permissive change add a new laptop configuration/model name: Gobi2000. This device is approved for collocation with Bluetooth module FCCID: MCLBCM92046 and WLAN module HLZ-AR5B93 or HLZ-AR5B95. Highest reported body SAR value is: 0.09W/kg.

EAS Grant - Application cizb6XE0Z5kOpNbLQEl5rQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan 		  Date of Grant: 11/16/2009

Application Dated: 11/13/2009
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: 3G MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original grant notes 06/09/2009) This class 2 permissive change add a new laptop configuration/model name: ZA8. This device is approved for collocation with Bluetooth module FCCID: QDS-BRCM1018 and WLAN module HLZ-AR5B95. Highest reported body SAR value is: 0.1W/kg. (Grant Date: 09/01/2009) This class 2 permissive change add a new laptop configuration/model name: Gobi2000. This device is approved for collocation with Bluetooth module FCCID: MCLBCM92046 and WLAN module HLZ-AR5B93 or HLZ-AR5B95. Highest reported body SAR value is: 0.09W/kg.



TCB Grant - Application 13iHcr2LTE95DJ1mDitXiA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
 Date of Grant: 09/01/2009

Application Dated: 08/31/2009
Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: 3G MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original grant notes 06/09/2009)

This class 2 permissive change add a new laptop configuration/model name: ZA8. This device is approved for collocation with Bluetooth module FCCID: QDS-BRCM1018 and WLAN module HLZ-AR5B95.

Highest reported body SAR value is: 0.1W/kg.


EAS Grant - Application 13iHcr2LTE95DJ1mDitXiA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Acer Incorporated
8F, 88, Sec 1, Hsin Tai Wu Rd
Hsichih, Taipei Hsien, 221
Taiwan 		  Date of Grant: 09/01/2009

Application Dated: 08/31/2009
 
Attention: Harriot Lee , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HLZGOBI2000A
Name of Grantee:  Acer Incorporated
Equipment Class: PCS Licensed Transmitter
Notes: 3G MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Original grant notes 06/09/2009)

This class 2 permissive change add a new laptop configuration/model name: ZA8. This device is approved for collocation with Bluetooth module FCCID: QDS-BRCM1018 and WLAN module HLZ-AR5B95.

Highest reported body SAR value is: 0.1W/kg.



Mail To: