FCC ID HLZMT7921
2TX 11ax (WiFi6) + BLE Combo Card
by Acer Incorporated
Grantee Code: HLZ Product Code: MT7921
Latest application date: 2025-04-30
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-30 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-30 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-04-30 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-05 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-05-31 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-05-31 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-05-31 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-10-15 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-10-15 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-10-15 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-09 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-09 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-09 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7921 Grant Date: 09/25/2020 | 2021-02-25 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7921 Grant Date: 09/25/2020 | 2021-02-25 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7921 Grant Date: 09/25/2020 | 2021-02-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2025-10-27 | PDF 2.3 MB |
| User Manual | Users Manual | 2025-03-04 | PDF 2.2 MB |
| Users Manual | Users Manual | 2022-11-24 | PDF 1.1 MB |
| Users Manual_Acer Regulatory Information | Users Manual | 2022-11-24 | PDF 1 MB |
| Acer Regulatory Information and Safety Guide | Users Manual | 2022-04-10 | PDF 1 MB |
| Users Manual Metadata only | Users Manual | 2022-04-10 | PDF 1 MB |
| Users Manual revised | Users Manual | 2022-04-10 | PDF 1 MB |
| Users Manual_SG_CB514-2H_2HT_AAP-1_v2 | Users Manual | 2022-04-10 | PDF 767.8 KB |
| Users Manual_SG_CB514-2H_2HT_AAP-1_v2_Updated | Users Manual | 2022-04-10 | PDF 767.8 KB |
| Acer Regulatory Information and Safety Guide | Users Manual | 2021-09-29 | PDF 1,002.3 KB |
| Users Manual | Users Manual | 2021-09-29 | PDF 1.9 MB |
| Internal Photos | Internal Photos | 2025-10-27 | PDF 5.3 MB |
| Internal Photos | Internal Photos | 2025-03-04 | PDF 5.2 MB |
| Internal Photos | Internal Photos | 2022-11-24 | PDF 1.4 MB |
| Internal Photos | Internal Photos | 2022-04-10 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2021-09-29 | PDF 668 KB |
| External Photos | External Photos | 2025-10-27 | PDF 3.3 MB |
| External Photos | External Photos | 2025-03-04 | PDF 3.2 MB |
| External Photos | External Photos | 2022-11-24 | PDF 902 KB |
| External Photos | External Photos | 2022-04-10 | PDF 758.8 KB |
| External Photos | External Photos | 2021-09-29 | PDF 460 KB |
| External Photos | External Photos | 2021-08-23 | PDF 210.9 KB |
| Label Location | ID Label/Location Info | 2025-04-30 | PDF 58.2 KB |
| Label SAmple | ID Label/Location Info | 2025-04-30 | PDF 1.2 MB |
| Label Sample | ID Label/Location Info | 2025-04-30 | PDF 1.2 MB |
| Label Location | ID Label/Location Info | 2024-09-05 | PDF 36.2 KB |
| Label Sample | ID Label/Location Info | 2024-09-05 | PDF 28.2 KB |
| ID Label/Location Info | ID Label/Location Info | 2022-05-31 | PDF 327.2 KB |
| ID Label | ID Label/Location Info | 2021-10-15 | PDF 250.7 KB |
| ID Label/Location Info Metadata only | ID Label/Location Info | 2021-10-15 | PDF 113.3 KB |
| Label Location | ID Label/Location Info | 2021-10-15 | PDF 113.3 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-04-09 | PDF 84.9 KB |
| TSUP Antenna AWAN | Test Setup Photos | 2025-10-27 | PDF 663.7 KB |
| TSUP Antenna INNOWAVE | Test Setup Photos | 2025-10-27 | PDF 857 KB |
| TSUP SAR | Test Setup Photos | 2025-10-27 | PDF 501.2 KB |
| TSUP SAR | Test Setup Photos | 2025-04-30 | PDF 1.4 MB |
| TSUP Antenna | Test Setup Photos | 2025-03-04 | PDF 407.1 KB |
| TSUP SAR | Test Setup Photos | 2025-03-04 | PDF 495.9 KB |
| Test Setup Photos_BLE Metadata only | Test Setup Photos | 2022-11-24 | PDF 927.6 KB |
| Test Setup Photos_DSS | Test Setup Photos | 2022-11-24 | PDF 911.1 KB |
| Test Setup Photos_NII | Test Setup Photos | 2022-11-24 | PDF 1,008.5 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2022-11-24 | PDF 796.3 KB |
| Test Setup Photos_WLAN Metadata only | Test Setup Photos | 2022-11-24 | PDF 1,010.8 KB |
| Test Setup Photos_BT | Test Setup Photos | 2022-04-10 | PDF 664.7 KB |
| Test Setup Photos_NII | Test Setup Photos | 2022-04-10 | PDF 654.9 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2022-04-10 | PDF 738.1 KB |
| Test Setup Photos_WLAN | Test Setup Photos | 2022-04-10 | PDF 654.6 KB |
| Test Setup Photos_BLE | Test Setup Photos | 2021-09-29 | PDF 615.8 KB |
| Test Setup Photos_NII | Test Setup Photos | 2021-09-29 | PDF 616.1 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2021-09-29 | PDF 441 KB |
| Test Setup Photos_WLAN | Test Setup Photos | 2021-09-29 | PDF 615.8 KB |
| Antenna Specifications AWAN | Test Report | 2025-04-30 | PDF 489.4 KB |
| Antenna Specifications INNOWAVE | Test Report | 2025-04-30 | PDF 565.1 KB |
| Antenna Specifications | Test Report | 2024-09-05 | PDF 938.5 KB |
| Test Report_BLE | Test Report | 2022-05-31 | PDF 1.9 MB |
| Test Report_DSS | Test Report | 2022-05-31 | PDF 1.8 MB |
| Test Report_NII-1 | Test Report | 2022-05-31 | PDF 1.3 MB |
| Test Report_NII-2 | Test Report | 2022-05-31 | PDF 5.7 MB |
| Test Report_SAR | RF Exposure Info | 2022-05-31 | PDF 1.4 MB |
| Test Report_SAR_Appendix B | RF Exposure Info | 2022-05-31 | PDF 685.2 KB |
| Test Report_SAR_Appendix C | RF Exposure Info | 2022-05-31 | PDF 1.1 MB |
| Test Report_WLAN | Test Report | 2022-05-31 | PDF 4.9 MB |
| Test Report_BLE | Test Report | 2021-10-15 | PDF 1.3 MB |
| Test Report_DSS | Test Report | 2021-10-15 | PDF 1.1 MB |
| Test Report_NII | Test Report | 2021-10-15 | PDF 3.1 MB |
| Test Report_SAR | RF Exposure Info | 2021-10-15 | PDF 986.8 KB |
| Test Report_SAR_Appendix B | RF Exposure Info | 2021-10-15 | PDF 3.4 MB |
| Test Report_SAR_Appendix C | RF Exposure Info | 2021-10-15 | PDF 1.1 MB |
| Test Report_WLAN | Test Report | 2021-10-15 | PDF 2.2 MB |
| DTS Test Report_BLE | Test Report | 2021-04-09 | PDF 660.2 KB |
| DTS Test Report_WLAN | Test Report | 2021-04-09 | PDF 1.1 MB |
| Test Report_NII | Test Report | 2021-04-09 | PDF 1.5 MB |
| Test Report_SAR | RF Exposure Info | 2021-04-09 | PDF 1.3 MB |
| Test Report_SAR_Appendix B | RF Exposure Info | 2021-04-09 | PDF 1.2 MB |
| Test Report_SAR_Appendix C | RF Exposure Info | 2021-04-09 | PDF 1.4 MB |
| Att Statements 2.911(d)(5)(7) | Attestation Statements | 2025-04-30 | PDF 194.3 KB |
| Att Statements 2.911(d)(5)(i) | Attestation Statements | 2025-04-30 | PDF 172.3 KB |
| Att Statements 2.911(d)(5)(ii) | Attestation Statements | 2025-04-30 | PDF 154.3 KB |
| Attestation Statement 2.911(d)(7) | Attestation Statements | 2024-09-05 | PDF 154.7 KB |
| Attestation Statement Part 2.911(d)(7) | Attestation Statements | 2024-09-05 | PDF 154.7 KB |
| Attstn Stmt Part 2.911(d)(5)(i) | Attestation Statements | 2024-09-05 | PDF 157.8 KB |
| Attstn Stmt Part 2.911(d)(5)(ii) | Attestation Statements | 2024-09-05 | PDF 157.2 KB |
| Attstn Stmts Part 2.911(d)(5)(i) | Attestation Statements | 2024-09-05 | PDF 157.8 KB |
| Attstn Stmts Part 2.911(d)(5)(ii) | Attestation Statements | 2024-09-05 | PDF 157.2 KB |
| Authorization Letter | Cover Letter(s) | 2025-04-30 | PDF 241.7 KB |
| Authorization Letter for Grantee | Cover Letter(s) | 2025-04-30 | PDF 30.8 KB |
| C2PC Letter | Cover Letter(s) | 2025-04-30 | PDF 147 KB |
| Confidentiality Letter | Cover Letter(s) | 2025-04-30 | PDF 201.3 KB |
| C2PC Letter | Cover Letter(s) | 2024-09-05 | PDF 136.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2024-09-05 | PDF 186.9 KB |
| Declaration of Authorization | Cover Letter(s) | 2024-09-05 | PDF 182 KB |
| Declaration of authorization | Cover Letter(s) | 2024-09-05 | PDF 182 KB |
| Authorization letter | Cover Letter(s) | 2022-05-31 | PDF 20.1 KB |
| Declaration of authorization | Cover Letter(s) | 2022-05-31 | PDF 104.5 KB |
| FCC Class II permissive change letter | Cover Letter(s) | 2022-05-31 | PDF 58 KB |
| PAG check list Revised | Cover Letter(s) | 2022-05-31 | PDF 177.6 KB |
| confidentiality | Cover Letter(s) | 2022-05-31 | PDF 116.2 KB |
| Declaration of authorization | Cover Letter(s) | 2021-10-15 | PDF 104.5 KB |
| DoC | Cover Letter(s) | 2021-10-15 | PDF 47.2 KB |
| FCC Class II permissive change letter | Cover Letter(s) | 2021-10-15 | PDF 57.7 KB |
| Request for LT or STC confidentiality | Cover Letter(s) | 2021-10-15 | PDF 115.5 KB |
| SAR Report | RF Exposure Info | 2025-04-30 | PDF 1.4 MB |
| SAR Report App A | RF Exposure Info | 2025-04-30 | PDF 344.8 KB |
| SAR Report App B | RF Exposure Info | 2025-04-30 | PDF 478.2 KB |
| SAR Report App D | RF Exposure Info | 2025-04-30 | PDF 2.3 MB |
| SAR Report App E | RF Exposure Info | 2025-04-30 | PDF 5.1 MB |
| SAR Report | RF Exposure Info | 2024-09-05 | PDF 1.2 MB |
| SAR Report App A | RF Exposure Info | 2024-09-05 | PDF 232.6 KB |
| SAR Report App B | RF Exposure Info | 2024-09-05 | PDF 267.1 KB |
| SAR Report App D | RF Exposure Info | 2024-09-05 | PDF 1.6 MB |
| SAR Report App E | RF Exposure Info | 2024-09-05 | PDF 4.4 MB |
Application Information
| Application ID | udy6wePzgvPccVQgvpGy2A== |
|---|---|
| Final Action Date | 2025-04-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013355508 |
| Model | MT7921 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 2TX 11ax (WiFi6) + BLE Combo Card |
| Responsible Party | RU Jan, Sr. Manager, ru.jan@acer.com  , 886-2-6606-3131 |
| Test Firm | Mirenda Liao, DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou, mirenda.liao@dekra.com  , 886-2-7753-7200 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/27/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. Class II Permissive Change: This change is to incorporate this Module into a Tablet PC, Model number: N25H8, as described in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.84 W/kg and 1.57 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| udy6wePzgvPccVQgvpGy2A== | 2025-04-30 | Class II permissive change or modification of presently authorized equipment |
| dRDVAUrwCgs0+PlxsjHpQg== | 2025-04-30 | Class II permissive change or modification of presently authorized equipment |
| 9+HogU+CK5FaY+FBahe3Qg== | 2025-04-30 | Class II permissive change or modification of presently authorized equipment |
| vPj8+KX401+arwf/iunggA== | 2024-09-05 | Class II permissive change or modification of presently authorized equipment |
| XOBVLWvmwdiFJNf1jmsHuQ== | 2024-09-05 | Class II permissive change or modification of presently authorized equipment |
| SprN4Ytka/yANRRSrtqDVg== | 2024-09-05 | Class II permissive change or modification of presently authorized equipment |
| qSDqaC4PXACwtcCJ05w9MQ== | 2022-05-31 | Class II permissive change or modification of presently authorized equipment |
| WmNskXDiXtqyT4/gUHy/7g== | 2022-05-31 | Class II permissive change or modification of presently authorized equipment |
| 9o1lGl66UujTlsGpG14FZw== | 2022-05-31 | Class II permissive change or modification of presently authorized equipment |
| O4y2yndHWuDFQ4eYvI+xKw== | 2021-10-15 | Class II permissive change or modification of presently authorized equipment |
| DWaqdB5i2nm82DxOPmII7Q== | 2021-10-15 | Class II permissive change or modification of presently authorized equipment |
| 89wivws9GWhUtpfLVEIIzw== | 2021-10-15 | Class II permissive change or modification of presently authorized equipment |
| j28FmMjm1H+CPmEfK0iKBw== | 2021-04-09 | Class II permissive change or modification of presently authorized equipment |
| XPTu92UR5vmyTHq47187AQ== | 2021-04-09 | Class II permissive change or modification of presently authorized equipment |
| A+poOwxxB3Wp2W93EPIrXQ== | 2021-04-09 | Class II permissive change or modification of presently authorized equipment |
| rV9ffwAA+/Vo7JJg/3nVSg== | 2021-02-25 | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7921 Grant Date: 09/25/2020 |
| agl331X4zXlCmnB7UZeInQ== | 2021-02-25 | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7921 Grant Date: 09/25/2020 |
| Hfy2LBTuN2nwyKkqMyrI1A== | 2021-02-25 | Change in identification of presently authorized equipment. Original FCC ID: RAS-MT7921 Grant Date: 09/25/2020 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.015 | 15C | CC |
| 2402-2480 MHz | 0.0150000 | 15C | CC |
| 2402-2480 MHz | 0.015 | CC | |
| 2402-2480 MHz | 0.0150000 | CC | |
| 2412-2472 MHz | 0.843 | 15C | CC, MO |
| 2412-2472 MHz | 0.843 | CC, MO | |
| 5180-5240 MHz | 0.152 | 15E | CC, MO |
| 5180-5240 MHz | 0.152 | CC, MO | |
| 5260-5320 MHz | 0.154 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.154 | CC, MO, ND | |
| 5500-5720 MHz | 0.158 | 15E | CC, MO, ND |
| 5500-5720 MHz | 0.158 | CC, MO, ND | |
| 5745-5825 MHz | 0.196 | 15E | CC, MO |
| 5745-5825 MHz | 0.196 | CC, MO |
Grants
TCB Grant - Application XPTu92UR5vmyTHq47187AQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/09/2021 Application Dated: 04/01/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N20C12) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.18 W/kg and 0.28 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application XPTu92UR5vmyTHq47187AQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 04/09/2021 Application Dated: 04/01/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N20C12) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.18 W/kg and 0.28 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 09/05/2024 Application Dated: 09/04/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. Class II Permissive Change: This change is to incorporate this Module into a notebook computer (Brand/Model number: acer / N23H7) as described in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.94 W/kg and 0.58 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application XOBVLWvmwdiFJNf1jmsHuQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 09/05/2024 Application Dated: 09/04/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. Class II Permissive Change: This change is to incorporate this Module into a notebook computer (Brand/Model number: acer / N23H7) as described in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.94 W/kg and 0.58 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/31/2022 Application Dated: 05/27/2022 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N22Q7) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.10 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application WmNskXDiXtqyT4/gUHy/7g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 05/31/2022 Application Dated: 05/27/2022 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N22Q7) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.10 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 09/05/2024 Application Dated: 09/04/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: This change is to incorporate this Module into a notebook computer (Brand/Model number: acer / N23H7) as described in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.37 W/kg and 1.45 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application vPj8+KX401+arwf/iunggA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 09/05/2024 Application Dated: 09/04/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: This change is to incorporate this Module into a notebook computer (Brand/Model number: acer / N23H7) as described in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.37 W/kg and 1.45 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 04/30/2025 Application Dated: 04/30/2025 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. Class II Permissive Change: This change is to incorporate this Module into a Tablet PC, Model number: N25H8, as described in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.84 W/kg and 1.57 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application SprN4Ytka/yANRRSrtqDVg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 09/05/2024 Application Dated: 09/03/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. Class II Permissive Change: This change is to incorporate this Module into a notebook computer (Brand/Model number: acer / N23H7) as described in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.67 W/kg and 1.45 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application SprN4Ytka/yANRRSrtqDVg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 09/05/2024 Application Dated: 09/03/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. Class II Permissive Change: This change is to incorporate this Module into a notebook computer (Brand/Model number: acer / N23H7) as described in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.67 W/kg and 1.45 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/25/2021 Application Dated: 02/23/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application rV9ffwAA+/Vo7JJg/3nVSg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 02/25/2021 Application Dated: 02/23/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/31/2022 Application Dated: 05/27/2022 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N22Q7) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.42 W/kg and 1.58 W/kg, respectively.
Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application qSDqaC4PXACwtcCJ05w9MQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 05/31/2022 Application Dated: 05/27/2022 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N22Q7) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.42 W/kg and 1.58 W/kg, respectively.
Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 10/15/2021 Application Dated: 10/11/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N21Q5) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.20 W/kg and 1.56 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application O4y2yndHWuDFQ4eYvI+xKw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 10/15/2021 Application Dated: 10/11/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N21Q5) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.20 W/kg and 1.56 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/09/2021 Application Dated: 04/01/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N20C12) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are <0.1 W/kg and 1.15 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application j28FmMjm1H+CPmEfK0iKBw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 04/09/2021 Application Dated: 04/01/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N20C12) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are <0.1 W/kg and 1.15 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/25/2021 Application Dated: 02/23/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Hfy2LBTuN2nwyKkqMyrI1A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 02/25/2021 Application Dated: 02/23/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 10/15/2021 Application Dated: 10/11/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N21Q5) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.35 W/kg and 1.45 W/kg, respectively.
Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application DWaqdB5i2nm82DxOPmII7Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 10/15/2021 Application Dated: 10/11/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N21Q5) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.35 W/kg and 1.45 W/kg, respectively.
Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 04/30/2025 Application Dated: 04/30/2025 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: This change is to incorporate this Module into a Tablet PC, Model number: N25H8, as described in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.59 W/kg and 0.93 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application agl331X4zXlCmnB7UZeInQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/25/2021 Application Dated: 02/23/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application agl331X4zXlCmnB7UZeInQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 02/25/2021 Application Dated: 02/23/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/09/2021 Application Dated: 04/01/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N20C12) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.08 W/kg and 1.52 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application A+poOwxxB3Wp2W93EPIrXQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 04/09/2021 Application Dated: 04/01/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.152 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.154 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.158 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.196 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N20C12) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.08 W/kg and 1.52 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz, 40MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/31/2022 Application Dated: 05/27/2022 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N22Q7) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.16 W/kg and 1.58 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 9o1lGl66UujTlsGpG14FZw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 05/31/2022 Application Dated: 05/27/2022 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N22Q7) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.16 W/kg and 1.58 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 04/30/2025 Application Dated: 04/30/2025 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. Class II Permissive Change: This change is to incorporate this Module into a Tablet PC, Model number: N25H8, as described in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 0.93 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application 89wivws9GWhUtpfLVEIIzw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 10/15/2021 Application Dated: 10/11/2021 |
| Acer Incorporated |
| 9F, 88, Sec. 1, Xintai 5th Rd. |
| New Taipei City, 221 Taiwan |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N21Q5) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.10 W/kg and 1.45 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 89wivws9GWhUtpfLVEIIzw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 9F, 88, Sec. 1, Xintai 5th Rd. New Taipei City, 221 Taiwan |
Date of Grant: 10/15/2021 Application Dated: 10/11/2021 |
| Attention: Harriot Lee , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZMT7921 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | 2TX 11ax (WiFi6) + BLE Combo Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.843 |
| Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : Acer/ N21Q5) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.10 W/kg and 1.45 W/kg, respectively. Power listed is the maximum conducted output power Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |