FCC ID HLZN19W2

This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 1.19 W/kg, and 1.20 W/kg, respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and equirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This device has 20, 40, and 80 MHz bandwidth modes.

This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 1.19 W/kg, and 1.20 W/kg, respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and equirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This device has 20, 40, and 80 MHz bandwidth modes.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This device has 20, 40, and 80 MHz bandwidth modes.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This device has 20, 40, and 80 MHz bandwidth modes.

This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.18 W/kg, and 1.26 W/kg, respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.18 W/kg, and 1.26 W/kg, respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This device has 20 and 40 MHz bandwidth modes.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This device has 20 and 40 MHz bandwidth modes.

This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.85 W/kg, and 0.88 W/kg, respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and equirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This device has 20, 40, and 80 MHz bandwidth modes.

This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.85 W/kg, and 0.88 W/kg, respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and equirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This device has 20, 40, and 80 MHz bandwidth modes.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This device has 20 and 40 MHz bandwidth modes.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This device has 20 and 40 MHz bandwidth modes.

This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 1.15 W/kg, and 1.26 W/kg, respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This device has 20 and 40 MHz bandwidth modes.

This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 1.15 W/kg, and 1.26 W/kg, respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This device has 20 and 40 MHz bandwidth modes.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.26 W/kg, and 1.19 W/kg, respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.

This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.26 W/kg, and 1.19 W/kg, respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively.

This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 17mm minimum test separation distance.

SAR testing was performed to demonstrate RF compliance.