FCC ID HLZQCNCM825
Qualcomm WiFi 7/BT Combo module
by Acer Incorporated
Grantee Code: HLZ Product Code: QCNCM825
Latest application date: 2025-07-03
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-03 |
| 5935-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-03 |
| 2412-2472 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-03 |
| 5180-5250 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-03 |
| 5935-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2025-06-17 |
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2025-06-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-06-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-06-17 |
| 5935-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-13 |
| 5180-5250 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-13 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-13 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-06-13 |
| 5180-5250 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 08/27/2023 | 2024-04-08 |
| 5935-6415 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 08/27/2023 | 2024-04-08 |
| 2404-2478 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 01/21/2024 | 2024-04-07 |
| 2412-2472 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 08/27/2023 | 2024-04-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Regulatory Information | Users Manual | 2025-12-30 | PDF 2.6 MB |
| User Manual | Users Manual | 2025-12-30 | PDF 4.2 MB |
| User Manual | Users Manual | 2025-12-14 | PDF 3.1 MB |
| Acer Regulatory Information and Safety Guide_EN_v8.2 | Users Manual | 2024-12-09 | PDF 1 MB |
| UM_SF14-11_11T_(Bluetang_SX1)_EN_v1 | Users Manual | 2024-12-09 | PDF 3.9 MB |
| Internal Photos | Internal Photos | 2025-12-30 | PDF 2 MB |
| Internal Photos pt. 1 | Internal Photos | 2025-12-14 | PDF 5.2 MB |
| Internal Photos pt. 2 | Internal Photos | 2025-12-14 | PDF 5.2 MB |
| Internal Photos_Part 1 | Internal Photos | 2024-12-09 | PDF 3.2 MB |
| Internal Photos_Part 2 | Internal Photos | 2024-12-09 | PDF 3.2 MB |
| External Photos | External Photos | 2025-12-30 | PDF 678.4 KB |
| External Photos | External Photos | 2025-12-14 | PDF 704.7 KB |
| External Photos | External Photos | 2024-12-09 | PDF 816 KB |
| External Photos | External Photos | 2024-04-08 | PDF 963.8 KB |
| Label Info and Location | ID Label/Location Info | 2025-07-03 | PDF 138.9 KB |
| Label Info and Location | ID Label/Location Info | 2025-06-17 | PDF 88.9 KB |
| ID Label/Location Info Metadata only | ID Label/Location Info | 2024-06-13 | PDF 221.6 KB |
| ID Label/Location Info Revised | ID Label/Location Info | 2024-06-13 | PDF 283.4 KB |
| Label Location_rev2 | ID Label/Location Info | 2024-04-08 | PDF 91.3 KB |
| Label Sample_rev | ID Label/Location Info | 2024-04-08 | PDF 274 KB |
| TSUP Antenna | Test Setup Photos | 2025-12-30 | PDF 759.5 KB |
| TSUP SAR | Test Setup Photos | 2025-12-30 | PDF 612.4 KB |
| TSUP SAR | Test Setup Photos | 2025-12-14 | PDF 541.8 KB |
| Test Setup Photos_Antenna report | Test Setup Photos | 2024-12-09 | PDF 877.2 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2024-12-09 | PDF 553.3 KB |
| Antenna Report | Test Report | 2025-07-03 | PDF 1 MB |
| Antenna Report | Test Report | 2025-06-17 | PDF 1.3 MB |
| Antenna Specification | Test Report | 2024-06-13 | PDF 1.7 MB |
| Test Report_SAR | RF Exposure Info | 2024-06-13 | PDF 2.4 MB |
| Test Report_SAR_Appendix B_DAE _ Probe Cal. Certificate | RF Exposure Info | 2024-06-13 | PDF 4.2 MB |
| Test Report_SAR_Appendix C_Phantom Description _ Dipole Cal. Certificate | RF Exposure Info | 2024-06-13 | PDF 2.8 MB |
| Att Statements 2.911(d)(5)(7) | Attestation Statements | 2025-07-03 | PDF 194.3 KB |
| Att Statements 2.911(d)(5)(i)&(ii) | Attestation Statements | 2025-07-03 | PDF 154 KB |
| Att Statements 2.911(d)(5)(i)&(ii) | Attestation Statements | 2025-06-17 | PDF 149.7 KB |
| Attestation Statements US agent for service of process | Attestation Statements | 2024-06-13 | PDF 154.7 KB |
| Attestation Statements part 2.911_d__5__i_ and 2.911_d__5__ii | Attestation Statements | 2024-06-13 | PDF 144.9 KB |
| Attestation (Statements of part 2.911(d)(5))_rev | Attestation Statements | 2024-04-08 | PDF 76.2 KB |
| Attestation (U.S. local Agent Letter of part 2.911(d)(7)) | Attestation Statements | 2024-04-08 | PDF 134.4 KB |
| Authorization Letter | Cover Letter(s) | 2025-07-03 | PDF 70.3 KB |
| C2PC Letter | Cover Letter(s) | 2025-07-03 | PDF 111.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2025-07-03 | PDF 156.9 KB |
| Authorization Letter | Cover Letter(s) | 2025-06-17 | PDF 69.9 KB |
| C2PC Letter | Cover Letter(s) | 2025-06-17 | PDF 110.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2025-06-17 | PDF 156.1 KB |
| FCC Class II permissive change letter | Cover Letter(s) | 2024-06-13 | PDF 110.8 KB |
| FCC_agent_auth_letter | Cover Letter(s) | 2024-06-13 | PDF 70.1 KB |
| confidentiality | Cover Letter(s) | 2024-06-13 | PDF 156.3 KB |
| Confidentiality Request (Long term)_rev | Cover Letter(s) | 2024-04-08 | PDF 156.6 KB |
| Cover Letter (Agent Authorization)_rev | Cover Letter(s) | 2024-04-08 | PDF 150.4 KB |
| Cover Letter (Change ID Authorization) | Cover Letter(s) | 2024-04-08 | PDF 98.5 KB |
| Cover Letter (Contact Authorization-Qualcomm) | Cover Letter(s) | 2024-04-08 | PDF 65.5 KB |
| Cover Letter (Request for Change ID)_rev | Cover Letter(s) | 2024-04-08 | PDF 162.6 KB |
| SAR Report | RF Exposure Info | 2025-07-03 | PDF 3.7 MB |
| SAR Report App B pt. 1 | RF Exposure Info | 2025-07-03 | PDF 5.1 MB |
| SAR Report App B pt. 2 | RF Exposure Info | 2025-07-03 | PDF 5.3 MB |
| SAR Report App B pt. 3 | RF Exposure Info | 2025-07-03 | PDF 1.1 MB |
| SAR Report App C pt. 1 | RF Exposure Info | 2025-07-03 | PDF 5.1 MB |
| SAR Report App C pt. 2 | RF Exposure Info | 2025-07-03 | PDF 828.8 KB |
| SAR Report App D | RF Exposure Info | 2025-07-03 | PDF 866.3 KB |
| SAR Report App D | RF Exposure Info | 2025-07-03 | PDF 1 MB |
| SAR Report | RF Exposure Info | 2025-06-17 | PDF 3.5 MB |
| SAR Report App B pt. 1 | RF Exposure Info | 2025-06-17 | PDF 5.2 MB |
| SAR Report App B pt. 2 | RF Exposure Info | 2025-06-17 | PDF 5.1 MB |
| SAR Report App B pt. 3 | RF Exposure Info | 2025-06-17 | PDF 3.1 MB |
| SAR Report App C pt. 1 | RF Exposure Info | 2025-06-17 | PDF 5.1 MB |
| SAR Report App C pt. 2 | RF Exposure Info | 2025-06-17 | PDF 828.8 KB |
| SAR Report App D | RF Exposure Info | 2025-06-17 | PDF 867.2 KB |
| Software Operational Description_rev Metadata only | SDR Software/Security Info. | PDF 153.1 KB | |
| Software Operational Description_rev Metadata only | Operational Description | PDF 153.1 KB |
Application Information
| Application ID | S3QtHCFc6xrJTlOHeBQE6w== |
|---|---|
| Final Action Date | 2025-07-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013355508 |
| Model | QCNCM825 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Qualcomm WiFi 7/BT Combo module |
| Responsible Party | RU Jan, Sr. Manager, ru.jan@acer.com  , 886-2-6606-3131 |
| Test Firm | Ryan WANG, SGS Taiwan Ltd. Central RF Lab, ryan-ec.wang@sgs.com  , 886222993279 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/30/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Authorizes portable use when integrated into the acer, model: N25C8 portable computer. The highest reported SAR values for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.15 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| S3QtHCFc6xrJTlOHeBQE6w== | 2025-07-03 | Class II permissive change or modification of presently authorized equipment |
| I1xzd47A/ga5ZI0sR7ySRw== | 2025-07-03 | Class II permissive change or modification of presently authorized equipment |
| HK4HDR8xahf1l2VT0VmUBw== | 2025-07-03 | Class II permissive change or modification of presently authorized equipment |
| 7ff1JMs7leo2qpRSCANXaA== | 2025-07-03 | Class II permissive change or modification of presently authorized equipment |
| sZmE1/rpngj+ynKM9zW0Cg== | 2025-06-17 | Class II permissive change or modification of presently authorized equipment |
| sVgF2kuIkNugKJHnVDZuhQ== | 2025-06-17 | Class II permissive change or modification of presently authorized equipment |
| K+cKS1djX+medMoHwSmLzw== | 2025-06-17 | Class II permissive change or modification of presently authorized equipment |
| F1sJby2DGjUuVNbDWHFvKQ== | 2025-06-17 | Class II permissive change or modification of presently authorized equipment |
| o5giJ6vW2hLIKis/zmqldg== | 2024-06-13 | Class II permissive change or modification of presently authorized equipment |
| htap/5cw7RPztgu/rg8vgg== | 2024-06-13 | Class II permissive change or modification of presently authorized equipment |
| a2aiPkZaqc1uIUicFgIL/w== | 2024-06-13 | Class II permissive change or modification of presently authorized equipment |
| MCPZ7e6BrG7r4o5rJd1Sqg== | 2024-06-13 | Class II permissive change or modification of presently authorized equipment |
| aVQRrLRlHolIlF1bLiLdSg== | 2024-04-08 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 08/27/2023 |
| NiiDbOrdxZmagmkU6srPzg== | 2024-04-08 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 08/27/2023 |
| xtXTKprckWI+PD3tIyxNBA== | 2024-04-07 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 01/21/2024 |
| E/6G9PwHpRPT7uSwATNCyg== | 2024-04-07 | Change in identification of presently authorized equipment. Original FCC ID: J9C-QCNCM825 Grant Date: 08/27/2023 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.025 | 15C | CC, MO |
| 2402-2480 MHz | 0.036 | 15C | CC, MO |
| 2402-2480 MHz | 0.025 | CC, MO | |
| 2402-2480 MHz | 0.036 | CC, MO | |
| 2404-2478 MHz | 0.035 | 15C | CC, MO |
| 2404-2478 MHz | 0.035 | CC, MO | |
| 2412-2472 MHz | 0.932 | 15C | CC, MO |
| 2412-2472 MHz | 0.932 | CC, MO | |
| 5180-5250 MHz | 0.158 | 15E | CC, MO |
| 5180-5250 MHz | 0.158 | CC, MO | |
| 5250-5320 MHz | 0.145 | 15E | CC, MO, ND |
| 5250-5320 MHz | 0.145 | CC, MO, ND | |
| 5500-5720 MHz | 0.176 | 15E | CC, MO, ND |
| 5500-5720 MHz | 0.176 | CC, MO, ND | |
| 5745-5825 MHz | 0.146 | 15E | CC, MO |
| 5745-5825 MHz | 0.146 | CC, MO | |
| 5815 MHz | 0.155 | 15E | CC, EP, MO |
| 5815 MHz | 0.155 | CC, EP, MO | |
| 5835 MHz | 0.456 | 15E | CC, EP, MO |
| 5835 MHz | 0.456 | CC, EP, MO | |
| 5845 MHz | 0.374 | 15E | CC, EP, MO |
| 5845 MHz | 0.374 | CC, EP, MO | |
| 5855 MHz | 0.525 | 15E | CC, EP, MO |
| 5855 MHz | 0.525 | CC, EP, MO | |
| 5865-5885 MHz | 0.426 | 15E | CC, EP, MO |
| 5865-5885 MHz | 0.426 | CC, EP, MO | |
| 5935-6415 MHz | 0.684 | 15E | CC, EP, MO |
| 5935-6415 MHz | 0.684 | CC, EP, MO | |
| 5935-7115 MHz | 0.206 | 15E | CC, EP, MO |
| 5935-7115 MHz | 0.206 | CC, EP, MO | |
| 6535-6855 MHz | 0.536 | 15E | CC, EP, MO |
| 6535-6855 MHz | 0.536 | CC, EP, MO |
Grants
TCB Grant - Application xtXTKprckWI+PD3tIyxNBA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle #1 Littleton, MA 01460 |
Date of Grant: 04/07/2024 Application Dated: 03/14/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device. Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application xtXTKprckWI+PD3tIyxNBA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 04/07/2024 Application Dated: 03/14/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. Software change to enable QHS mode for this device. Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 06/17/2025 Application Dated: 06/17/2025 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. Class II Permissive Change: Authorizes portable use when integrated into the acer, model: N25C7 portable computer. The highest reported SAR values for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.24 W/kg, respectively. The highest reported power density is 0.79 W/m2. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application sVgF2kuIkNugKJHnVDZuhQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 06/17/2025 Application Dated: 06/17/2025 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into the acer, model: N25C7 portable computer. The highest reported SAR values for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.23 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application S3QtHCFc6xrJTlOHeBQE6w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 07/03/2025 Application Dated: 07/03/2025 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Authorizes portable use when integrated into the acer, model: N25C8 portable computer. The highest reported SAR values for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.15 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application o5giJ6vW2hLIKis/zmqldg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 06/13/2024 Application Dated: 06/07/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N24C10). The highest reported SAR values for 1g and simultaneous transmission use conditions are 0.96 W/kg and 1.40 W/kg respectively. Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application o5giJ6vW2hLIKis/zmqldg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 06/13/2024 Application Dated: 06/07/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N24C10). The highest reported SAR values for 1g and simultaneous transmission use conditions are 0.96 W/kg and 1.40 W/kg respectively. Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle #1 Littleton, MA 01460 |
Date of Grant: 04/08/2024 Application Dated: 03/15/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application NiiDbOrdxZmagmkU6srPzg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 04/08/2024 Application Dated: 03/15/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 06/13/2024 Application Dated: 06/07/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N24C10). The highest reported SAR values for 1g and simultaneous transmission use conditions are 0.32 W/kg and 1.34 W/kg respectively. Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application MCPZ7e6BrG7r4o5rJd1Sqg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 06/13/2024 Application Dated: 06/07/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N24C10). The highest reported SAR values for 1g and simultaneous transmission use conditions are 0.32 W/kg and 1.34 W/kg respectively. Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 06/17/2025 Application Dated: 06/17/2025 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Authorizes portable use when integrated into the acer, model: N25C7 portable computer. The highest reported SAR values for body and simultaneous transmission exposure conditions are 0.12 W/kg and 0.24 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application I1xzd47A/ga5ZI0sR7ySRw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 07/03/2025 Application Dated: 07/03/2025 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.684 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.536 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.206 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. Class II Permissive Change: Authorizes portable use when integrated into the acer, model: N25C8 portable computer. The highest reported SAR values for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.15 W/kg, respectively. The highest reported power density is 0.99 W/m2. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application htap/5cw7RPztgu/rg8vgg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 06/13/2024 Application Dated: 06/07/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N24C10). The highest reported SAR values for 1g and simultaneous transmission use conditions are 1.03 W/kg and 1.34 W/kg respectively. Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application htap/5cw7RPztgu/rg8vgg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 06/13/2024 Application Dated: 06/07/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N24C10). The highest reported SAR values for 1g and simultaneous transmission use conditions are 1.03 W/kg and 1.34 W/kg respectively. Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 07/03/2025 Application Dated: 07/03/2025 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into the acer, model: N25C8 portable computer. The highest reported SAR values for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.14 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application F1sJby2DGjUuVNbDWHFvKQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 06/17/2025 Application Dated: 06/17/2025 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into the acer, model: N25C7 portable computer. The highest reported SAR values for body and simultaneous transmission exposure conditions are 0.10 W/kg and 0.22 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application E/6G9PwHpRPT7uSwATNCyg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle #1 Littleton, MA 01460 |
Date of Grant: 04/07/2024 Application Dated: 03/15/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application E/6G9PwHpRPT7uSwATNCyg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 04/07/2024 Application Dated: 03/15/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle #1 Littleton, MA 01460 |
Date of Grant: 04/08/2024 Application Dated: 03/15/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application aVQRrLRlHolIlF1bLiLdSg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 04/08/2024 Application Dated: 03/15/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 06/13/2024 Application Dated: 06/07/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N24C10). The highest reported SAR values for 1g and simultaneous transmission use conditions are 0.46 W/kg and 0.82 W/kg respectively. Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application a2aiPkZaqc1uIUicFgIL/w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 06/13/2024 Application Dated: 06/07/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.025 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.932 |
| C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N24C10). The highest reported SAR values for 1g and simultaneous transmission use conditions are 0.46 W/kg and 0.82 W/kg respectively. Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 07/03/2025 Application Dated: 07/03/2025 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZQCNCM825 |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.158 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.145 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.176 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.146 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.426 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.374 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.456 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.525 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.155 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device as 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. Class II Permissive Change: Authorizes portable use when integrated into the acer, model: N25C8 portable computer. The highest reported SAR values for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.14 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |