FCC ID HLZQCNCM865

Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluationaccording to FCC multi-transmitter procedures. The host integrator must follow theintegration instructions provided by the module manufacturer and ensure that thecomposite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter.

Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluationaccording to FCC multi-transmitter procedures. The host integrator must follow theintegration instructions provided by the module manufacturer and ensure that thecomposite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter.

Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combinedconducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP.Co-transmission of this module with other transmitters requires a separate evaluationaccording to FCC multi-transmitter procedures. The host integrator must follow theintegration instructions provided by the module manufacturer and ensure that thecomposite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter. This devicehas 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes.

Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combinedconducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP.Co-transmission of this module with other transmitters requires a separate evaluationaccording to FCC multi-transmitter procedures. The host integrator must follow theintegration instructions provided by the module manufacturer and ensure that thecomposite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter. This devicehas 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes.

Single Modular Approval. Power listed is the EIRP. Co-transmission of this module withother transmitters requires a separate evaluation according to FCC multi-transmitterprocedures. The host integrator must follow the integration instructions provided by themodule manufacturer and ensure that the composite-system end product complies with theFCC requirements by a technical assessment or evaluation to the FCC rules and to KDBPublication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter. This devicehas 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopoleantenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliantindoor restrictions when connected to indoor low power AP.

Single Modular Approval. Power listed is the EIRP. Co-transmission of this module withother transmitters requires a separate evaluation according to FCC multi-transmitterprocedures. The host integrator must follow the integration instructions provided by themodule manufacturer and ensure that the composite-system end product complies with theFCC requirements by a technical assessment or evaluation to the FCC rules and to KDBPublication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter. This devicehas 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopoleantenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliantindoor restrictions when connected to indoor low power AP.

Single Modular Approval. Power listed is the maximum combined conducted output power.Co-transmission of this module with other transmitters requires a separate evaluationaccording to FCC multi-transmitter procedures. The host integrator must follow theintegration instructions provided by the module manufacturer and ensure that thecomposite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter. This devicehas 20 MHz and 40 MHz bandwidth modes.

Single Modular Approval. Power listed is the maximum combined conducted output power.Co-transmission of this module with other transmitters requires a separate evaluationaccording to FCC multi-transmitter procedures. The host integrator must follow theintegration instructions provided by the module manufacturer and ensure that thecomposite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter. This devicehas 20 MHz and 40 MHz bandwidth modes.

Change in identification of presently authorized equipment : Original FCC ID: J9C-QCNCM865, Grant Date: 04/05/2023.

Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluationaccording to FCC multi-transmitter procedures. The host integrator must follow theintegration instructions provided by the module manufacturer and ensure that thecomposite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter.

Change in identification of presently authorized equipment : Original FCC ID: J9C-QCNCM865, Grant Date: 04/05/2023.

Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluationaccording to FCC multi-transmitter procedures. The host integrator must follow theintegration instructions provided by the module manufacturer and ensure that thecomposite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter.

Change in identification of presently authorized equipment : Original FCC ID: J9C-QCNCM865, Grant Date: 04/05/2023.

Single Modular Approval. Power listed is the maximum combined conducted output power.Co-transmission of this module with other transmitters requires a separate evaluationaccording to FCC multi-transmitter procedures. The host integrator must follow theintegration instructions provided by the module manufacturer and ensure that thecomposite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter. This devicehas 20 MHz and 40 MHz bandwidth modes.

Change in identification of presently authorized equipment : Original FCC ID: J9C-QCNCM865, Grant Date: 04/05/2023.

Single Modular Approval. Power listed is the maximum combined conducted output power.Co-transmission of this module with other transmitters requires a separate evaluationaccording to FCC multi-transmitter procedures. The host integrator must follow theintegration instructions provided by the module manufacturer and ensure that thecomposite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter. This devicehas 20 MHz and 40 MHz bandwidth modes.

Change in identification of presently authorized equipment : Original FCC ID: J9C-QCNCM865, Grant Date: 04/05/2023.

Single Modular Approval. Power listed is the EIRP. Co-transmission of this module withother transmitters requires a separate evaluation according to FCC multi-transmitterprocedures. The host integrator must follow the integration instructions provided by themodule manufacturer and ensure that the composite-system end product complies with theFCC requirements by a technical assessment or evaluation to the FCC rules and to KDBPublication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter. This devicehas 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopoleantenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliantindoor restrictions when connected to indoor low power AP.

Change in identification of presently authorized equipment : Original FCC ID: J9C-QCNCM865, Grant Date: 04/05/2023.

Single Modular Approval. Power listed is the EIRP. Co-transmission of this module withother transmitters requires a separate evaluation according to FCC multi-transmitterprocedures. The host integrator must follow the integration instructions provided by themodule manufacturer and ensure that the composite-system end product complies with theFCC requirements by a technical assessment or evaluation to the FCC rules and to KDBPublication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter. This devicehas 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopoleantenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliantindoor restrictions when connected to indoor low power AP.

Change in identification of presently authorized equipment : Original FCC ID: J9C-QCNCM865, Grant Date: 04/05/2023.

Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combinedconducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP.Co-transmission of this module with other transmitters requires a separate evaluationaccording to FCC multi-transmitter procedures. The host integrator must follow theintegration instructions provided by the module manufacturer and ensure that thecomposite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter. This devicehas 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes.

Change in identification of presently authorized equipment : Original FCC ID: J9C-QCNCM865, Grant Date: 04/05/2023.

Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combinedconducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP.Co-transmission of this module with other transmitters requires a separate evaluationaccording to FCC multi-transmitter procedures. The host integrator must follow theintegration instructions provided by the module manufacturer and ensure that thecomposite-system end product complies with the FCC requirements by a technicalassessment or evaluation to the FCC rules and to KDB Publication 996369.

The module antenna(s) must be installed to meet the RF exposure compliance separationdistance of 20 cm and any additional testing and authorization process as required. Themodule grantee is responsible for providing the documentation to the system integrator onrestrictions of use, for continuing compliance of the module. The host integrator installingthis module into their product must ensure that the final composite product complies withthe FCC requirements by a technical assessment or evaluation to the FCC rules, includingthe transmitter operation and should refer to guidance in KDB 996369. Approval is limitedto OEM installation only. This grant is valid only when the device is sold to OEM integratorsand the OEM integrators are instructed to ensure that the end user has no manualinstructions to remove or install the device. Only those antenna(s) tested with the device orsimilar antenna(s) with equal or lesser gain may be used with this transmitter. This devicehas 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes.