FCC ID HLZRTL8822CE

FCC ID	HLZRTL8822CE
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	HLZ
Product Code	RTL8822CE
Applicant Business	Acer Incorporated 🇹🇼
Related Domains	acer.com sgs.com
Equipment Class	802.11 a/b/g/n/ac RTL8822CE Combo Module
Test Firm	SGS Taiwan Ltd. Central RF Lab

Frequency Range	Application Purpose	Final Action Date
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2021-10-27
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2021-10-27
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2021-10-27
5180-5240 MHz	Class II permissive change or modification of presently authorized equipment	2020-12-08
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2020-12-08
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2020-12-08
5180-5240 MHz	Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8822CE Grant Date: 02/27/2019	2020-10-15
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8822CE Grant Date: 02/27/2019	2020-10-15
2402-2480 MHz	Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8822CE Grant Date: 02/27/2019	2020-10-15

Document	Type	Available	File
Regulatory Information and Safety Guide	Users Manual	2022-04-17	PDF 1 MB
SG_CB514-2H_2HT_AAP-1	Users Manual	2022-04-17	PDF 767.8 KB
bCB514-2H_CB514-2HT_(Spherion_92)_QG_(20210813)	Users Manual	2022-04-17	PDF 1.1 MB
cbCB514-2H_CB514-2HT_(Spherion_92)_QG	Users Manual	2022-04-17	PDF 1.1 MB
cbCB514-2H_CB514-2HT_(Spherion_92)_QG_(20210813)	Users Manual	2022-04-17	PDF 1.1 MB
Users Manaul_Regulatory Information and Safety Guide	Users Manual	2021-05-30	PDF 1,002.3 KB
Users Manual	Users Manual	2021-05-30	PDF 1.2 MB
Users Manual_Regulatory Information and Safety Guide	Users Manual	2021-05-30	PDF 1,002.3 KB
Internal Photo	Internal Photos	2022-04-17	PDF 645.1 KB
Internal Photos	Internal Photos	2021-05-30	PDF 805.3 KB
External Photo	External Photos	2022-04-17	PDF 462.3 KB
External Photos	External Photos	2021-05-30	PDF 533.7 KB
External Photos	External Photos	2020-10-15	PDF 398.6 KB
ID Label	ID Label/Location Info	2021-10-27	PDF 187.2 KB
Label Location	ID Label/Location Info	2021-10-27	PDF 72.5 KB
ID Label/Location Info	ID Label/Location Info	2020-12-08	PDF 106.2 KB
ID Label/Location Info	ID Label/Location Info	2020-10-15	PDF 48.5 KB
Test Setup Photos	Test Setup Photos	2022-04-17	PDF 376.1 KB
Test Setup Photos_BLE	Test Setup Photos	2022-04-17	PDF 376.3 KB
Test Setup Photos_NII	Test Setup Photos	2022-04-17	PDF 412.5 KB
Test Setup Photos_SAR	Test Setup Photos	2022-04-17	PDF 693.6 KB
Test Setup Photos_WLAN	Test Setup Photos	2022-04-17	PDF 412.3 KB
Test Setup Photos_SAR	Test Setup Photos	2021-05-30	PDF 485.7 KB
Test Report	Test Report	2021-10-27	PDF 489.3 KB
Test Report_BLE	Test Report	2021-10-27	PDF 481.8 KB
Test Report_NII	Test Report	2021-10-27	PDF 1.1 MB
Test Report_SAR	RF Exposure Info	2021-10-27	PDF 950.7 KB
Test Report_WLAN	Test Report	2021-10-27	PDF 1 MB
Test Report_SAR Metadata only	RF Exposure Info	2020-12-08	PDF 1.4 MB
Test Report_SAR Revised	RF Exposure Info	2020-12-08	PDF 1.5 MB
Test Report_SAR_Appendix B	RF Exposure Info	2020-12-08	PDF 762.1 KB
Test Report_SAR_Appendix C	RF Exposure Info	2020-12-08	PDF 967.9 KB
Authorization letter	Cover Letter(s)	2021-10-27	PDF 20.1 KB
Class II permissive change letter	Cover Letter(s)	2021-10-27	PDF 110 KB
Confidentiality	Cover Letter(s)	2021-10-27	PDF 77.5 KB
Declaration of authorization	Cover Letter(s)	2021-10-27	PDF 85.9 KB
Declaration of authorization	Cover Letter(s)	2020-12-08	PDF 85.9 KB
FCC CIIPC Letter	Cover Letter(s)	2020-12-08	PDF 111 KB
Grantee Signature Authorization Letter	Cover Letter(s)	2020-12-08	PDF 20.1 KB
KDB_Response to Inquiry to FCC _Tracking Number 537457 Metadata only	Cover Letter(s)	2020-12-08	PDF 108.6 KB
Request for LT or STC confidentiality	Cover Letter(s)	2020-12-08	PDF 77.5 KB
FCC Auth Ltr Change of ID	Cover Letter(s)	2020-10-15	PDF 21.1 KB
FCC Auth Ltr Change of ID_New Grantee	Cover Letter(s)	2020-10-15	PDF 99.2 KB
RF_160_04, Declaration of authorization	Cover Letter(s)	2020-10-15	PDF 86.5 KB
Appendix B_DAE _ Probe Cal. Certificate	RF Exposure Info	2021-10-27	PDF 1.3 MB
Appendix C_Phantom Description _ Dipole Cal. Certificate	RF Exposure Info	2021-10-27	PDF 1.4 MB
Antenna Test Report Metadata only	Operational Description		PDF 1.5 MB
KDB inquiry_20200904 Metadata only	Operational Description		PDF 498.3 KB
KDB_Response to Inquiry to FCC _Tracking Number 537457_ Metadata only	Operational Description		PDF 108.6 KB
OP_Antenna Report Metadata only	Operational Description		PDF 1.9 MB

Application ID	DzX+Fy9intmuz9CRvyhS3g==
Final Action Date	2021-10-27
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0013355508
Model	RTL8822CE
Frequency Range	2402-2480 MHz
Equipment Class	DSS - Part 15 Spread Spectrum Transmitter
Device Description	802.11 a/b/g/n/ac RTL8822CE Combo Module
Responsible Party	Harriot S.L. Lee, Manager, Harriot.Lee@acer.com , 886-2-6606-3131
Technical Contact	Jim Chang, SGS Taiwan Ltd., jim.chang@sgs.com , +886222993279
Non-Technical Contact	Jim Chang, SGS Taiwan Ltd., jim.chang@sgs.com , +886222993279
Test Firm	Ryan WANG, SGS Taiwan Ltd. Central RF Lab, ryan-ec.wang@sgs.com , +886-2-2299-3279
TCB Email	certification@telefication.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	Yes
Short-Term Confidentiality Date	04/17/2022
Long-Term Confidentiality	Yes
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N21Q5). The highest reported SAR values are Body and Simultaneous SAR, 0.25 W/kg and 0.25W/kg respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.57W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

Application ID	Date	Purpose
DzX+Fy9intmuz9CRvyhS3g==	2021-10-27	Class II permissive change or modification of presently authorized equipment
4oV7H0yw+2wk8IKYcLFh+A==	2021-10-27	Class II permissive change or modification of presently authorized equipment
44VaAcQqIgG9mTGlmWXllQ==	2021-10-27	Class II permissive change or modification of presently authorized equipment
g8rRAMJpSb+C9mfV4E1wKQ==	2020-12-08	Class II permissive change or modification of presently authorized equipment
QQcrmF3ORYaXMy9scry7rA==	2020-12-08	Class II permissive change or modification of presently authorized equipment
4UGwP22L7vVOtiq+OdeRjg==	2020-12-08	Class II permissive change or modification of presently authorized equipment
mlTU7DzIzD7RzpXUiZhIEA==	2020-10-15	Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8822CE Grant Date: 02/27/2019
NhhtiStZ5yAFu80Tv26QDQ==	2020-10-15	Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8822CE Grant Date: 02/27/2019
3bljLurL6AaFR3BoKlGo0w==	2020-10-15	Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8822CE Grant Date: 02/27/2019

Frequency	Output	Rules	Grant Notes
2402-2480 MHz	0.0200000	15C	CC
2402-2480 MHz	0.016	15C	CC
2412-2472 MHz	0.794	15C	CC, MO
5180-5240 MHz	0.203	15E	CC, MO
5260-5320 MHz	0.207	15E	CC, MO, ND
5500-5720 MHz	0.217	15E	CC, MO, ND
5745-5825 MHz	0.308	15E	CC, MO

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 12/08/2020

Application Dated: 11/25/2020

Acer Incorporated

9F, 88, Sec. 1, Xintai 5th Rd.

New Taipei City, 221
Taiwan

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.02

C2PC: adding the host (Portable category Configuration, Host Brand: acer, Model: N20Q2). SAR has been evaluated at 0 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.08 W/kg, and 1.25 W/kg, respectively.

Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.57 W/kg and 1.35 W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Acer Incorporated
9F, 88, Sec. 1, Xintai 5th Rd.
New Taipei City, 221
Taiwan

Date of Grant: 12/08/2020

Application Dated: 11/25/2020

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.02

C2PC: adding the host (Portable category Configuration, Host Brand: acer, Model: N20Q2). SAR has been evaluated at 0 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 0.08 W/kg, and 1.25 W/kg, respectively.

Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.57 W/kg and 1.35 W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application NhhtiStZ5yAFu80Tv26QDQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 10/15/2020

Application Dated: 10/05/2020

Acer Incorporated

9F, 88, Sec. 1, Xintai 5th Rd.

New Taipei City, 221
Taiwan

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.016
CC MO	15C	2412.0 - 2472.0	0.794

Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.73 W/kg and 1.35 W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Acer Incorporated
9F, 88, Sec. 1, Xintai 5th Rd.
New Taipei City, 221
Taiwan

Date of Grant: 10/15/2020

Application Dated: 10/05/2020

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.016
CC MO	15C	2412.0 - 2472.0	0.794

Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.73 W/kg and 1.35 W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application mlTU7DzIzD7RzpXUiZhIEA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 10/15/2020

Application Dated: 10/05/2020

Acer Incorporated

9F, 88, Sec. 1, Xintai 5th Rd.

New Taipei City, 221
Taiwan

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.203
CC MO ND	15E	5260.0 - 5320.0	0.207
CC MO ND	15E	5500.0 - 5720.0	0.217
CC MO	15E	5745.0 - 5825.0	0.308

Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.78W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Acer Incorporated
9F, 88, Sec. 1, Xintai 5th Rd.
New Taipei City, 221
Taiwan

Date of Grant: 10/15/2020

Application Dated: 10/05/2020

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.203
CC MO ND	15E	5260.0 - 5320.0	0.207
CC MO ND	15E	5500.0 - 5720.0	0.217
CC MO	15E	5745.0 - 5825.0	0.308

Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.78W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application g8rRAMJpSb+C9mfV4E1wKQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 12/08/2020

Application Dated: 11/25/2020

Acer Incorporated

9F, 88, Sec. 1, Xintai 5th Rd.

New Taipei City, 221
Taiwan

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.203
CC MO ND	15E	5260.0 - 5320.0	0.207
CC MO ND	15E	5500.0 - 5720.0	0.217
CC MO	15E	5745.0 - 5825.0	0.308

C2PC: adding the host (Portable category Configuration, Host Brand: acer, Model: N20Q2). SAR has been evaluated at 0 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 1.17 W/kg, and 1.25 W/kg, respectively.

Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.78W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Acer Incorporated
9F, 88, Sec. 1, Xintai 5th Rd.
New Taipei City, 221
Taiwan

Date of Grant: 12/08/2020

Application Dated: 11/25/2020

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.203
CC MO ND	15E	5260.0 - 5320.0	0.207
CC MO ND	15E	5500.0 - 5720.0	0.217
CC MO	15E	5745.0 - 5825.0	0.308

C2PC: adding the host (Portable category Configuration, Host Brand: acer, Model: N20Q2). SAR has been evaluated at 0 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 1.17 W/kg, and 1.25 W/kg, respectively.

Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.78W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application DzX+Fy9intmuz9CRvyhS3g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 10/27/2021

Application Dated: 10/18/2021

Acer Incorporated

9F, 88, Sec. 1, Xintai 5th Rd.

New Taipei City, 221
Taiwan

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.02

C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N21Q5). The highest reported SAR values are Body and Simultaneous SAR, 0.25 W/kg and 0.25W/kg respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.57W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Acer Incorporated
9F, 88, Sec. 1, Xintai 5th Rd.
New Taipei City, 221
Taiwan

Date of Grant: 10/27/2021

Application Dated: 10/18/2021

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.02

C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N21Q5). The highest reported SAR values are Body and Simultaneous SAR, 0.25 W/kg and 0.25W/kg respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.57W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 4UGwP22L7vVOtiq+OdeRjg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 12/08/2020

Application Dated: 11/25/2020

Acer Incorporated

9F, 88, Sec. 1, Xintai 5th Rd.

New Taipei City, 221
Taiwan

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.016
CC MO	15C	2412.0 - 2472.0	0.794

C2PC: adding the host (Portable category Configuration, Host Brand: acer, Model: N20Q2). SAR has been evaluated at 0 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 1.15 W/kg, and 1.23 W/kg, respectively.

Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.73 W/kg and 1.35 W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Acer Incorporated
9F, 88, Sec. 1, Xintai 5th Rd.
New Taipei City, 221
Taiwan

Date of Grant: 12/08/2020

Application Dated: 11/25/2020

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.016
CC MO	15C	2412.0 - 2472.0	0.794

C2PC: adding the host (Portable category Configuration, Host Brand: acer, Model: N20Q2). SAR has been evaluated at 0 mm. The highest reported SAR values for body and simultaneous transmission use conditions are 1.15 W/kg, and 1.23 W/kg, respectively.

Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.73 W/kg and 1.35 W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 4oV7H0yw+2wk8IKYcLFh+A==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 10/27/2021

Application Dated: 10/18/2021

Acer Incorporated

9F, 88, Sec. 1, Xintai 5th Rd.

New Taipei City, 221
Taiwan

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.016
CC MO	15C	2412.0 - 2472.0	0.794

C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N21Q5). The highest reported SAR values are Body and Simultaneous SAR, 1.01 W/kg and 1.01W/kg respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.73W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Acer Incorporated
9F, 88, Sec. 1, Xintai 5th Rd.
New Taipei City, 221
Taiwan

Date of Grant: 10/27/2021

Application Dated: 10/18/2021

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.016
CC MO	15C	2412.0 - 2472.0	0.794

C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N21Q5). The highest reported SAR values are Body and Simultaneous SAR, 1.01 W/kg and 1.01W/kg respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.73W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 44VaAcQqIgG9mTGlmWXllQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 10/27/2021

Application Dated: 10/18/2021

Acer Incorporated

9F, 88, Sec. 1, Xintai 5th Rd.

New Taipei City, 221
Taiwan

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.203
CC MO ND	15E	5260.0 - 5320.0	0.207
CC MO ND	15E	5500.0 - 5720.0	0.217
CC MO	15E	5745.0 - 5825.0	0.308

C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N21Q5). The highest reported SAR values are Body and Simultaneous SAR, 1.07 W/kg and 1.07W/kg respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.78W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Acer Incorporated
9F, 88, Sec. 1, Xintai 5th Rd.
New Taipei City, 221
Taiwan

Date of Grant: 10/27/2021

Application Dated: 10/18/2021

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0 - 5240.0	0.203
CC MO ND	15E	5260.0 - 5320.0	0.207
CC MO ND	15E	5500.0 - 5720.0	0.217
CC MO	15E	5745.0 - 5825.0	0.308

C2PC: The subject approved module is being used in different host (Portable category Configuration, Host Brand: acer, Model: N21Q5). The highest reported SAR values are Body and Simultaneous SAR, 1.07 W/kg and 1.07W/kg respectively. Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.78W/kg and 1.35W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 3bljLurL6AaFR3BoKlGo0w==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands

Date of Grant: 10/15/2020

Application Dated: 10/05/2020

Acer Incorporated

9F, 88, Sec. 1, Xintai 5th Rd.

New Taipei City, 221
Taiwan

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.02

Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.57 W/kg and 1.35 W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Acer Incorporated
9F, 88, Sec. 1, Xintai 5th Rd.
New Taipei City, 221
Taiwan

Date of Grant: 10/15/2020

Application Dated: 10/05/2020

Attention: Harriot Lee , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HLZRTL8822CE

Name of Grantee:	Acer Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	802.11 a/b/g/n/ac RTL8822CE Combo Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.02

Class II Permissive Change the RF Exposure condition from mobile device to portable device condition with PIFA antenna (2.4GHz band antenna gain 3.5dBi, 5GHz band antenna gain 5dBi). The highest reported SAR for body and simultaneous transmission exposure condition is 0.57 W/kg and 1.35 W/kg respectively. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 0.5cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To:

802.11 a/b/g/n/ac RTL8822CE Combo Module

by Acer Incorporated

Grantee Code: HLZ Product Code: RTL8822CE

Latest application date: 2021-10-27

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application QQcrmF3ORYaXMy9scry7rA==

EAS Grant - Application QQcrmF3ORYaXMy9scry7rA==

TCB Grant - Application NhhtiStZ5yAFu80Tv26QDQ==

EAS Grant - Application NhhtiStZ5yAFu80Tv26QDQ==

TCB Grant - Application mlTU7DzIzD7RzpXUiZhIEA==

EAS Grant - Application mlTU7DzIzD7RzpXUiZhIEA==

TCB Grant - Application g8rRAMJpSb+C9mfV4E1wKQ==

EAS Grant - Application g8rRAMJpSb+C9mfV4E1wKQ==

TCB Grant - Application DzX+Fy9intmuz9CRvyhS3g==

EAS Grant - Application DzX+Fy9intmuz9CRvyhS3g==

TCB Grant - Application 4UGwP22L7vVOtiq+OdeRjg==

EAS Grant - Application 4UGwP22L7vVOtiq+OdeRjg==

TCB Grant - Application 4oV7H0yw+2wk8IKYcLFh+A==

EAS Grant - Application 4oV7H0yw+2wk8IKYcLFh+A==

TCB Grant - Application 44VaAcQqIgG9mTGlmWXllQ==

EAS Grant - Application 44VaAcQqIgG9mTGlmWXllQ==

TCB Grant - Application 3bljLurL6AaFR3BoKlGo0w==

EAS Grant - Application 3bljLurL6AaFR3BoKlGo0w==