FCC ID HN22011B-2

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 07/29/2003 Application Dated: 03/16/2003

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantee's Model 700C. Colocated transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when colocated with HN2SB555-2, and with specific second external antenna when not colocated with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application WrLhKvylZf0c41HU6i7pkw==

EAS Grant - Application WrLhKvylZf0c41HU6i7pkw==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 01/20/2004 Application Dated: 12/15/2003

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantee's Model 700C. Colocated transmitter operating configurations with optional Bluetooth FCC ID: HN2ABTM3-3, and optional Part 22/24 transmitters FCC ID: HN2SB555-2 or FCC ID: EHA700C-SMC45-1 have been evaluated as described in this and previous filings. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when colocated with a Part 22/24 transmitter, and with specific second external antenna when not colocated with a Part 22/24 transmitter. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application r6+YhH3CASWRi2o5cZacmA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 05/26/2004 Application Dated: 05/26/2004

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C and 751G

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 05/26/2004 Application Dated: 05/26/2004

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C and 751G
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application iQloexlAegbXckN/YHYmBg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 01/13/2005 Application Dated: 01/13/2005

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C, 751G, and CN2NI/CN2

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID:EHABTS080 and FCC ID: EHAEM3420 and FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 as has been evaluated as described in past filings. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna whether extended or retracted, and the users body. Endusers must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.19 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermecs Bluetooth-enabled printers, Model 6820 or Model PW40, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the 6820, or the PW40, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter may also be operated in the grantees Model CN2NI/CN2 handheld scanner. When installed in the Model CN2NI/CN2, this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. SAR compliance for body-worn operating configurations is limited to the specific configuration tested for this filing. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values when installed in the Model CN2NI/CN2 are: Part 15 body-worn 0.82 W/kg

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 01/13/2005 Application Dated: 01/13/2005

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C, 751G, and CN2NI/CN2
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID:EHABTS080 and FCC ID: EHAEM3420 and FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 as has been evaluated as described in past filings. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna whether extended or retracted, and the users body. Endusers must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.19 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermecs Bluetooth-enabled printers, Model 6820 or Model PW40, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the 6820, or the PW40, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter may also be operated in the grantees Model CN2NI/CN2 handheld scanner. When installed in the Model CN2NI/CN2, this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. SAR compliance for body-worn operating configurations is limited to the specific configuration tested for this filing. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values when installed in the Model CN2NI/CN2 are: Part 15 body-worn 0.82 W/kg

TCB Grant - Application IJIseGTciZ8Wj+dfS8Yogg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 01/13/2005 Application Dated: 01/13/2005

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C and 751G

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID:EHABTS080 and FCC ID: EHAEM3420 and FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 as has been evaluated as described in past filings. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna whether extended or retracted, and the users body. Endusers must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.19 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermecs Bluetooth-enabled printers, Model 6820 or Model PW40, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the 6820, or the PW40, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 01/13/2005 Application Dated: 01/13/2005

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C and 751G
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID:EHABTS080 and FCC ID: EHAEM3420 and FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 as has been evaluated as described in past filings. Other colocation configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna whether extended or retracted, and the users body. Endusers must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.19 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermecs Bluetooth-enabled printers, Model 6820 or Model PW40, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the 6820, or the PW40, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

TCB Grant - Application FS1Z21jjrjHMA3E2/t1Awg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 01/21/2004 Application Dated: 01/21/2004

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantees Model 700C. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 01/21/2004 Application Dated: 01/21/2004

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantees Model 700C. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application EcDs7nqK+PjNsKEav3t32w==

EAS Grant - Application EcDs7nqK+PjNsKEav3t32w==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 01/12/2005 Application Dated: 11/24/2004

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C and 751G
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: EHABTS080 and FCC ID: EHAEM3420 (this filing) and FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 as has been evaluated as described in past filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/holsters/accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna whether extended or retracted, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.19 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermec's Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3 or the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

TCB Grant - Application cl7S7szmab7609srszkDIA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 07/07/2004 Application Dated: 07/07/2004

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C and 751G

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermec’s Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3 or the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 07/07/2004 Application Dated: 07/07/2004

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN22011B-2
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	2011B Radio in 700C and 751G
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2412.0  -  2462.0	0.089

Output is conducted. This transmitter operates only in the grantees Model 700C or 751G. Co-located transmitter operating configurations with optional FCC ID: HN2ABTM3-3 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other co-location configurations require separate evaluation. Device operates only with specific internal antenna when co-located with HN2SB555-2, and with specific second external antenna when not co-located with HN2SB555-2. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg. This transmitter may also be co-located with Intermec’s Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. This radio may also be co-located with grantees RFID radio, Model IP3, FCC ID: EHARFID915PCC-6. When co-located with the IP3 or the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: