FCC ID HN2ABTM3-3

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 01/21/2004 Application Dated: 12/15/2003

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN2ABTM3-3
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	ABTM3 Radio in 700C
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2402.0  -  2480.0	0.01

Output is conducted. This transmitter operates only in the grantee's Model 700C. Colocated transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Part 22/24 transmitters FCC ID: HN2SB555-2 or FCC ID: EHA700C-SMC45-1 have been evaluated as described in this and previous filings. Other colocation configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application vVZ2H6OVwV1NcAy6ccbySg==

EAS Grant - Application vVZ2H6OVwV1NcAy6ccbySg==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 07/29/2003 Application Dated: 03/15/2003

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN2ABTM3-3
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	ABTM3 Radio in 700C
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2402.0  -  2480.0	0.01

Output is conducted. This transmitter operates only in the grantee's Model 700C. Colocated transmitter operating configurations with optional FCC ID: HN22011B-2 and FCC ID: HN2SB555-2 have been evaluated as described in this filing. Other colocation configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 body-worn 0.15 W/kg Part 22 Head: 0.13 W/kg; Body-worn: 0.31 W/kg Part 24 Head: 1.47 W/kg; Body-worn: 1.00 W/kg

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application P2frTfkyylSCfTYpii79Ug==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 07/07/2004 Application Dated: 07/07/2004

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN2ABTM3-3
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	ABTM3 Radio in 700C

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2402.0  -  2480.0	0.01

Output is conducted. This transmitter operates only in the grantees Model 700C. Colocated transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Part 22/24 transmitters FCC ID: HN2SB555-2 or FCC ID: EHA700C-SMC45-1 have been evaluated as described in this and previous filings. Other colocation configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg. This transmitter may also be colocated with Intermecs Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. When co-located with the the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter not described in this application.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 07/07/2004 Application Dated: 07/07/2004

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN2ABTM3-3
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	ABTM3 Radio in 700C
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CE	15C	2402.0  -  2480.0	0.01

Output is conducted. This transmitter operates only in the grantees Model 700C. Colocated transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Part 22/24 transmitters FCC ID: HN2SB555-2 or FCC ID: EHA700C-SMC45-1 have been evaluated as described in this and previous filings. Other colocation configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg. This transmitter may also be colocated with Intermecs Bluetooth-enabled printer, Model 6820, FCC ID: EHABTS080-1. When co-located with the the 6820, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter not described in this application.

CE:	This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application GOA2TFVT6HGoASx1bKkvvw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124

Date of Grant: 12/19/2004 Application Dated: 12/19/2004

Intermec Technologies Corporation

9680 Old Bailes Rd.

Fort Mill, SC 29707

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN2ABTM3-3
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	ABTM3 Radio in 700C

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0  -  2480.0	0.01

Output is conducted. This transmitter operates only in the grantees Model 700C. Colocated transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Part 22/24 transmitters FCC ID: HN2SB555-2 or FCC ID: EHA700C-SMC45-1 have been evaluated as described in this and previous filings. Other colocation configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg. This transmitter may also be colocated with Intermecs Bluetooth-enabled printers, Model 6820 or Model PW40, FCC ID: EHABTS080-1. When co-located with the the 6820 or PW40, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter not described in this application.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Date of Grant: 12/19/2004 Application Dated: 12/19/2004

Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HN2ABTM3-3
Name of Grantee:	Intermec Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	ABTM3 Radio in 700C
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0  -  2480.0	0.01

Output is conducted. This transmitter operates only in the grantees Model 700C. Colocated transmitter operating configurations with optional WLAN FCC ID: HN22011B-2 and optional Part 22/24 transmitters FCC ID: HN2SB555-2 or FCC ID: EHA700C-SMC45-1 have been evaluated as described in this and previous filings. Other colocation configurations require separate evaluation. SAR compliance for body-worn operations is restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for co-located configurations are: Part 15 WLAN body-worn 0.15 W/kg Part 24 Head: 0.65 W/kg; Body-worn: 0.57 W/kg. This transmitter may also be colocated with Intermecs Bluetooth-enabled printers, Model 6820 or Model PW40, FCC ID: EHABTS080-1. When co-located with the the 6820 or PW40, the antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter not described in this application.

Mail To: