FCC ID HN2EASYLAN

Model EASYLAN

by Intermec Technologies Corporation

Grantee Code: HN2   Product Code: EASYLAN
Latest application date: 2003-03-18

FCC ID Device Details

FCC IDHN2EASYLAN
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeHN2
Product CodeEASYLAN
Applicant BusinessIntermec Technologies Corporation 🇺🇸
Related Domains honeywell.com intermec.com
Equipment ClassModel EASYLAN
Test FirmNorthwest EMC, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2003-03-18
2412-2462 MHzOriginal Equipment2002-05-09

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2003-03-18PDF 948 KB
User ManualUsers Manual2002-05-09PDF 856.7 KB
User Manual 2Users Manual2002-05-09PDF 104.4 KB
Internal PhotosInternal Photos2002-05-09PDF 1.8 MB
External PhotosExternal Photos2003-03-18PDF 250.2 KB
External PhotosExternal Photos2002-05-09PDF 1.9 MB
FCC ID Label and Location on RadioID Label/Location Info2003-03-18PDF 425.6 KB
FCC ID Label and LocationID Label/Location Info2002-05-09PDF 370.1 KB
Frequency Block DiagramBlock Diagram2002-05-09PDF 75.4 KB
Operational DescriptionOperational Description2002-05-09PDF 245.5 KB
Test Setup PhotosTest Setup Photos2003-03-18PDF 583.3 KB
Test Setup PhotosTest Setup Photos2002-05-09PDF 1 MB
Test SetupPhotosTest Setup Photos2002-05-09PDF 1.7 MB
Technical ReportTest Report2003-03-18PDF 2.4 MB
Antenna InformationTest Report2002-05-09PDF 1.4 MB
CKC Technical ReportTest Report2002-05-09PDF 419.9 KB
CKC Technical Report 2Test Report2002-05-09PDF 329 KB
Output PowerTest Report2002-05-09PDF 173.6 KB
Processing GainTest Report2002-05-09PDF 1.1 MB
Spurious Conducted EmissionsTest Report2002-05-09PDF 282.5 KB
Spurious Radiated Emissions for Radio Outside of PrinterTest Report2002-05-09PDF 193.6 KB
Spuroius Radiated Emissions with Printer ConfigurationsTest Report2002-05-09PDF 832.6 KB
Technical Report General InformationTest Report2002-05-09PDF 287.2 KB
4400 Printer Family Attestation LetterCover Letter(s)2003-03-18PDF 70.6 KB
501XP 601XP Attestation LetterCover Letter(s)2003-03-18PDF 71 KB
Attestation Letter for Equipment ModificationAttestation Statements2002-05-09PDF 40.3 KB
Attestation Letter for Equivalency to PTY90148Attestation Statements2002-05-09PDF 41.1 KB
501XP 601 XP FCC Verified LetterCover Letter(s)2003-03-18PDF 71.4 KB
Compliance OpinionCover Letter(s)2003-03-18PDF 75.1 KB
Cover Letter From ApplicantCover Letter(s)2003-03-18PDF 161 KB
Index of ExhibitsCover Letter(s)2003-03-18PDF 40 KB
Compliance OpinioinCover Letter(s)2002-05-09PDF 69.5 KB
Modular Approval LetterCover Letter(s)2002-05-09PDF 114.4 KB
Request for ConfidentialityCover Letter(s)2002-05-09PDF 140.4 KB
Digital Schematics Metadata onlySchematicsPDF 126.5 KB
Radio Schematics Metadata onlySchematicsPDF 423.1 KB

Application Information

Application IDWFGyfalYJFwX3t3wIcN2ug==
Final Action Date2003-03-18
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0003729654
ModelEASYLAN
Frequency Range2412-2462 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionModel EASYLAN
Responsible PartyBrian Rudick, VP & GC, Honeywell Scanning & Mobility, brian.rudick@honeywell.com , 803-835-8769
Technical ContactCarl K Turk, Intermec, carl.turk@intermec.com , 425 356-1765
Non-Technical ContactCheryl D White, Intermec, chery.white@intermec.com , 425 348-2600
Test FirmGreg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com , 503-844-4066
TCB Emailgkiemel@nwemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance. Approved only for use in Intermec Technologies Corporation Model 3400E400, Model 4400 printers and Models 501XP and 601XP printers.

Applications

Application IDDatePurpose
WFGyfalYJFwX3t3wIcN2ug==2003-03-18Class II permissive change or modification of presently authorized equipment
zXv+E5DagX2qZ7AZ+AxVsw==2002-05-09Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.022400015CCE
2412-2462 MHz0.022400015C

Grants

TCB Grant - Application zXv+E5DagX2qZ7AZ+AxVsw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 05/09/2002

Application Dated: 05/09/2002
Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN2EASYLAN
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: EASYLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0224  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approved only for use in Intermec Corporation Model 3400E400 and Model 4400 printers.

EAS Grant - Application zXv+E5DagX2qZ7AZ+AxVsw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
United States
  Date of Grant: 05/09/2002

Application Dated: 05/09/2002
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN2EASYLAN
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: EASYLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0224  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approved only for use in Intermec Corporation Model 3400E400 and Model 4400 printers.



TCB Grant - Application WFGyfalYJFwX3t3wIcN2ug==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124
Date of Grant: 03/18/2003

Application Dated: 03/18/2003
Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN2EASYLAN
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Model EASYLAN
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.0224  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance. Approved only for use in Intermec Technologies Corporation Model 3400E400, Model 4400 printers and Models 501XP and 601XP printers.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application WFGyfalYJFwX3t3wIcN2ug==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Intermec Technologies Corporation
9680 Old Bailes Rd.
Fort Mill, SC 29707
United States
  Date of Grant: 03/18/2003

Application Dated: 03/18/2003
 
Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HN2EASYLAN
Name of Grantee:  Intermec Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Model EASYLAN
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.0224  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance. Approved only for use in Intermec Technologies Corporation Model 3400E400, Model 4400 printers and Models 501XP and 601XP printers.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: