FCC ID HN2WN-5MP01
WN-5MP01
by Intermec Technologies Corporation
Grantee Code: HN2 Product Code: WN5MP01
Latest application date: 2003-11-26
FCC ID Device Details
| FCC ID | HN2WN-5MP01 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | HN2 |
| Product Code | WN5MP01 |
| Applicant Business | Intermec Technologies Corporation 🇺🇸 |
| Related Domains |  honeywell.com  nwemc.com |
| Equipment Class | WN-5MP01 |
| Test Firm | Northwest EMC, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5220 MHz | Class II permissive change or modification of presently authorized equipment | 2003-11-26 |
| 5180-5220 MHz | Original Equipment | 2002-10-22 |
| 5180-5220 MHz | Original Equipment | 2002-09-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2002-10-22 | PDF 1,002.6 KB |
| Internal Photos | Internal Photos | 2003-11-26 | PDF 619.1 KB |
| Internal PHotos | Internal Photos | 2002-10-22 | PDF 2.4 MB |
| Internal Photos Metadata only | Internal Photos | PDF 2.4 MB | |
| Externa Photos | External Photos | 2002-10-22 | PDF 686.1 KB |
| External Photos Metadata only | External Photos | PDF 686.1 KB | |
| ID Label and Location | ID Label/Location Info | 2003-11-26 | PDF 57.9 KB |
| Additional FCC ID Label Information | ID Label/Location Info | 2002-10-22 | PDF 658.6 KB |
| FCC ID Label and Location | ID Label/Location Info | 2002-10-22 | PDF 1.8 MB |
| Integral Antenna Information | Operational Description | 2002-10-22 | PDF 196.5 KB |
| Operational Description | Operational Description | 2002-10-22 | PDF 125.1 KB |
| Professional Antenna Installation Instructions | Operational Description | 2002-10-22 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2003-11-26 | PDF 1.7 MB |
| Test Setup PHotos 2 | Test Setup Photos | 2002-10-22 | PDF 1.3 MB |
| Test Setup Photos 1 | Test Setup Photos | 2002-10-22 | PDF 1.6 MB |
| Test Setup Photos 3 | Test Setup Photos | 2002-10-22 | PDF 2.2 MB |
| Test Setup Photos 4 | Test Setup Photos | 2002-10-22 | PDF 1.1 MB |
| Test Setup Photos 5 | Test Setup Photos | 2002-10-22 | PDF 1.7 MB |
| Test Setup Photos Metadata only | Test Setup Photos | PDF 2.2 MB | |
| Technical Report | Test Report | 2003-11-26 | PDF 3.3 MB |
| AC Conducted Emissions | Test Report | 2002-10-22 | PDF 373 KB |
| Antenna Information | Test Report | 2002-10-22 | PDF 789.4 KB |
| Frequency Stability | Test Report | 2002-10-22 | PDF 36 KB |
| Occupied Bandwidth | Test Report | 2002-10-22 | PDF 207.8 KB |
| Peak Excursion of the Modulation Envelope | Test Report | 2002-10-22 | PDF 217.6 KB |
| Peak Output Power | Test Report | 2002-10-22 | PDF 151.5 KB |
| Peak Power Spectral Density | Test Report | 2002-10-22 | PDF 210.2 KB |
| Spurious Radiated Emissions | Test Report | 2002-10-22 | PDF 822.7 KB |
| Spurious Radiated Emissions RE Scans Part 1 | Test Report | 2002-10-22 | PDF 1.7 MB |
| Spurious Radiated Emissions RE Scans Part 2 | Test Report | 2002-10-22 | PDF 1.8 MB |
| Technical Report General Information | Test Report | 2002-10-22 | PDF 113.2 KB |
| Spurious Radiated Emissions Metadata only | Test Report | PDF 339.4 KB | |
| Agent Authorization Letter | Cover Letter(s) | 2003-11-26 | PDF 95.7 KB |
| Compliance Opinion | Cover Letter(s) | 2003-11-26 | PDF 66.3 KB |
| Cover letter from agent | Cover Letter(s) | 2003-11-26 | PDF 13.2 KB |
| Request for Confidentiality | Cover Letter(s) | 2002-10-22 | PDF 117.3 KB |
| Compliance Opinion | Cover Letter(s) | PDF 67.1 KB | |
| RF Exposure Info | RF Exposure Info | 2003-11-26 | PDF 42.1 KB |
| RF Exposure | RF Exposure Info | 2002-10-22 | PDF 485.6 KB |
| RF Exposure Info Metadata only | RF Exposure Info | PDF 334.3 KB | |
| Frequency Block Diagram Metadata only | Block Diagram | PDF 93.4 KB | |
| Schematics Metadata only | Schematics | PDF 114.6 KB |
Application Information
| Application ID | 83BxECZxXwWu7KY4E3YVIA== |
|---|---|
| Final Action Date | 2003-11-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003729654 |
| Model | WN-5MP01 |
| Frequency Range | 5180-5220 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | WN-5MP01 |
| Responsible Party | Brian Rudick, VP & GC, Honeywell Scanning & Mobility, brian.rudick@honeywell.com , 803-835-8769 |
| Agent | Greg Greg Greg, Northwest EMC, Inc., gkiemel@nwemc.com , 503-844-4066 |
| Technical Contact | Greg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com , 503-844-4066 |
| Non-Technical Contact | Vicki Albertson, Northwest EMC, Inc., valbertson@nwemc.com , 503-84-4066 |
| Test Firm | Greg Kiemel, Northwest EMC, Inc., gkiemel@nwemc.com , 503-844-4066 |
| TCB Email | gkiemel@nwemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power is EIRP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter must be operated only in the grantees Model WA21 or Model WA22 access points. This transmitter may be operated as a pair, or in conjunction with FCC ID: HN2MPCI3A-20, or in conjunction with FCC ID: HN2WAMIG2. For operation in the 5.15 - 5.25 GHz band, this device must be used indoors and only with the permanently attached antennas described in this application. This transmitter must be operated only according to the exposure conditions described in this application. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 83BxECZxXwWu7KY4E3YVIA== | 2003-11-26 | Class II permissive change or modification of presently authorized equipment |
| Ke65tCwW9op1FaYHL2Q7ig== | 2002-10-22 | Original Equipment |
| h+icJaJNIct7X3XfaWgMgg== | 2002-09-27 | Original Equipment |
Grants
TCB Grant - Application Ke65tCwW9op1FaYHL2Q7ig==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 10/22/2002 Application Dated: 10/22/2002 |
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
| Fort Mill, SC 29707 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HN2WN-5MP01 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WN-5MP01 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5220.0 | 0.049 | |||
| 15E | 5260.0 - 5320.0 | 0.2344 |
| Output Power is EIRP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter must be operated only in the grantees Model WA21 or Model WA22 access points. This transmitter may be operated as a pair, or in conjunction with FCC ID: HN2MPCI3A-20. For operation in the 5.15 - 5.25 GHz band, this device must be used indoors and only with the permanently attached antennas described in this application. This transmitter must be operated only according to the exposure conditions described in this application. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application Ke65tCwW9op1FaYHL2Q7ig==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 10/22/2002 Application Dated: 10/22/2002 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HN2WN-5MP01 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WN-5MP01 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5220.0 | 0.049 | |||
| 15E | 5260.0 - 5320.0 | 0.2344 |
| Output Power is EIRP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter must be operated only in the grantees Model WA21 or Model WA22 access points. This transmitter may be operated as a pair, or in conjunction with FCC ID: HN2MPCI3A-20. For operation in the 5.15 - 5.25 GHz band, this device must be used indoors and only with the permanently attached antennas described in this application. This transmitter must be operated only according to the exposure conditions described in this application. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 11/26/2003 Application Dated: 11/26/2003 |
| Intermec Technologies Corporation |
| 9680 Old Bailes Rd. |
| Fort Mill, SC 29707 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HN2WN-5MP01 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WN-5MP01 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5220.0 | 0.049 | |||
| 15E | 5260.0 - 5320.0 | 0.2344 |
| Output Power is EIRP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter must be operated only in the grantees Model WA21 or Model WA22 access points. This transmitter may be operated as a pair, or in conjunction with FCC ID: HN2MPCI3A-20, or in conjunction with FCC ID: HN2WAMIG2. For operation in the 5.15 - 5.25 GHz band, this device must be used indoors and only with the permanently attached antennas described in this application. This transmitter must be operated only according to the exposure conditions described in this application. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 83BxECZxXwWu7KY4E3YVIA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Intermec Technologies Corporation 9680 Old Bailes Rd. Fort Mill, SC 29707 United States |
Date of Grant: 11/26/2003 Application Dated: 11/26/2003 |
| Attention: Brian Rudick , VP & GC, Honeywell Scanning & Mobility |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HN2WN-5MP01 |
| Name of Grantee: | Intermec Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WN-5MP01 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15E | 5180.0 - 5220.0 | 0.049 | |||
| 15E | 5260.0 - 5320.0 | 0.2344 |
| Output Power is EIRP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. This transmitter must be operated only in the grantees Model WA21 or Model WA22 access points. This transmitter may be operated as a pair, or in conjunction with FCC ID: HN2MPCI3A-20, or in conjunction with FCC ID: HN2WAMIG2. For operation in the 5.15 - 5.25 GHz band, this device must be used indoors and only with the permanently attached antennas described in this application. This transmitter must be operated only according to the exposure conditions described in this application. End-users and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance. |
| Mail To: |