FCC ID HSW-2420

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669

Date of Grant: 07/13/2021 Application Dated: 07/13/2021

Murata Electronics North America

2200 Lake Park Drive

Smyrna, GA 30080-7604

Attention: Mark Tucker , Director of Hardware Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HSW-2420
Name of Grantee:	Murata Electronics North America
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless 2.4 GHz Industrial Transceiver
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2401.69  -  2469.89	0.053

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications with the specific antennas listed in the user manual. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States

Date of Grant: 07/13/2021 Application Dated: 07/13/2021

Attention: Mark Tucker , Director of Hardware Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HSW-2420
Name of Grantee:	Murata Electronics North America
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless 2.4 GHz Industrial Transceiver
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2401.69  -  2469.89	0.053

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications with the specific antennas listed in the user manual. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

TCB Grant - Application gdBCCVLgbYqieBRTLOotCg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

IIA Lab Services, LLC 13146 NW 86th Drive Suite 400 Alachua, FL 32615

Date of Grant: 03/18/2026 Application Dated: 03/18/2026

Murata Electronics North America

3330 Cumberland Blvd., SE

Suite 700

Atlanta, GA 30339

Attention: Mark Tucker , Director of Hardware Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	HSW-2420
Name of Grantee:	Murata Electronics North America
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Wireless 2.4 GHz industrial Transceiver
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2401.69  -  2469.89	0.053

Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is to be used only for mobile and fixed applications with the specific antennas listed in the user manual. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Replacing Bandpass and Lowpass circuit elements with pin-for-pin compatible devices due to component end-of-life.