FCC ID HSW-5811M
Wireless LAN
by Murata Electronics North America
Grantee Code: HSW Product Code: 5811M
Latest application date: 2004-04-26
FCC ID Device Details
| FCC ID | HSW-5811M |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | HSW |
| Product Code | 5811M |
| Applicant Business | Murata Electronics North America 🇺🇸 |
| Related Domains |  murata.com |
| Equipment Class | Wireless LAN |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5729-5821 MHz | Class II permissive change or modification of presently authorized equipment | 2004-04-26 |
| 5729-5821 MHz | Original Equipment | 2003-10-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| users manual | Users Manual | 2003-10-28 | PDF 377.3 KB |
| internal photos | Internal Photos | 2003-10-28 | PDF 415.8 KB |
| antenna photos | External Photos | 2004-04-26 | PDF 111.8 KB |
| external photos | External Photos | 2003-10-28 | PDF 151.1 KB |
| label sample and location | ID Label/Location Info | 2003-10-28 | PDF 179.7 KB |
| operational description | Operational Description | 2003-10-28 | PDF 112.8 KB |
| test setup photos | Test Setup Photos | 2004-04-26 | PDF 160.9 KB |
| test setup photos | Test Setup Photos | 2003-10-28 | PDF 186.8 KB |
| data plots | Test Report | 2004-04-26 | PDF 380.4 KB |
| test report | Test Report | 2004-04-26 | PDF 134.1 KB |
| CW signal | Test Report | 2003-10-28 | PDF 488.1 KB |
| bandedge plots | Test Report | 2003-10-28 | PDF 193.5 KB |
| data plots a | Test Report | 2003-10-28 | PDF 2.1 MB |
| data plots b | Test Report | 2003-10-28 | PDF 2.1 MB |
| test report | Test Report | 2003-10-28 | PDF 298 KB |
| class II change letter | Cover Letter(s) | 2004-04-26 | PDF 62.5 KB |
| modular certification | Cover Letter(s) | 2003-10-28 | PDF 119.3 KB |
| request for confidentiality | Cover Letter(s) | 2003-10-28 | PDF 69.9 KB |
| block diagram Metadata only | Block Diagram | PDF 81.5 KB | |
| schematics Metadata only | Schematics | PDF 219.9 KB | |
| parts list Metadata only | Parts List/Tune Up Info | PDF 104.6 KB |
Application Information
| Application ID | Qr+BLP0ucVBkgknhvycGGQ== |
|---|---|
| Final Action Date | 2004-04-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024753089 |
| Model | 5811M |
| Frequency Range | 5729-5821 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless LAN |
| Responsible Party | Mark Tucker, Director of Hardware Engineering, mtucker@murata.com , 678 684-2009 |
| Test Firm | Douglas Massey, Advanced Compliance Solutions, Inc., dmassey@acstestlab.com  , 770-831-8048 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output is conducted at the antenna terminal. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated for typical antenna as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 56.5%, controlled by protocol firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Qr+BLP0ucVBkgknhvycGGQ== | 2004-04-26 | Class II permissive change or modification of presently authorized equipment |
| pH+ttmNraYv5B+d7CG7kCw== | 2003-10-28 | Original Equipment |
Grants
TCB Grant - Application Qr+BLP0ucVBkgknhvycGGQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 04/26/2004 Application Dated: 04/26/2004 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-5811M |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CE | 15C | 5729.0 - 5821.0 | 0.254 |
| Power output is conducted at the antenna terminal. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated for typical antenna as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 56.5%, controlled by protocol firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application Qr+BLP0ucVBkgknhvycGGQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 04/26/2004 Application Dated: 04/26/2004 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-5811M |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CE | 15C | 5729.0 - 5821.0 | 0.254 |
| Power output is conducted at the antenna terminal. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated for typical antenna as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 56.5%, controlled by protocol firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/28/2003 Application Dated: 10/28/2003 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-5811M |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | WIRELESS LAN |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CE | 15C | 5729.0 - 5821.0 | 0.254 |
| Power output is conducted at the antenna terminal. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated for typical antenna as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 56.5%, controlled by protocol firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application pH+ttmNraYv5B+d7CG7kCw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 10/28/2003 Application Dated: 10/28/2003 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-5811M |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | WIRELESS LAN |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CE | 15C | 5729.0 - 5821.0 | 0.254 |
| Power output is conducted at the antenna terminal. This is an OEM module approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated for typical antenna as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 56.5%, controlled by protocol firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |